From: arnd@arndb.de (Arnd Bergmann)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 04/10] doc/bindings: Update PCIe devicetree binding documentation for LS2080A
Date: Mon, 07 Sep 2015 13:32:10 +0200 [thread overview]
Message-ID: <80094129.LHZFOe1ZPU@wuerfel> (raw)
In-Reply-To: <1441349872-4560-5-git-send-email-bhupesh.sharma@freescale.com>
On Friday 04 September 2015 12:27:46 Bhupesh Sharma wrote:
> @@ -4,7 +4,8 @@ This PCIe host controller is based on the Synopsis Designware PCIe IP
> and thus inherits all the common properties defined in designware-pcie.txt.
>
> Required properties:
> -- compatible: should contain the platform identifier such as "fsl,ls1021a-pcie"
> +- compatible: should contain the platform identifier such as "fsl,ls1021a-pcie",
> + "fsl,ls2080a-pcie".
> - reg: base addresses and lengths of the PCIe controller
> - interrupts: A list of interrupt outputs of the controller. Must contain an
> entry for each entry in the interrupt-names property.
>
Are the two PCIe hosts mutually compatible? If they are, you should mandate
one of the strings as the base model for identification, with the additional
model being optional for identification of the specific SoC.
It would also be good to add a string with the specific version number of the
designware PCIe block that is being used there.
Arnd
next prev parent reply other threads:[~2015-09-07 11:32 UTC|newest]
Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-09-04 6:57 [PATCH v2 00/10] ARM64: Update support for FSL's LS2085A SoC Bhupesh Sharma
2015-09-04 6:57 ` [PATCH v2 01/10] arm64: Use generic Layerscape SoC family naming & rename LS2085A to LS2080A Bhupesh Sharma
2015-09-04 16:31 ` Li Yang
2015-09-04 20:10 ` Sharma Bhupesh
2015-09-08 20:24 ` Stuart Yoder
2015-09-09 3:54 ` Sharma Bhupesh
2015-09-04 6:57 ` [PATCH v2 02/10] Documentation: DT: Add entry for FSL LS2080A QDS and RDB boards Bhupesh Sharma
2015-09-04 6:57 ` [PATCH v2 03/10] Documentation/dts: Add bindings for QIXIS FPGA controller found on FSL boards Bhupesh Sharma
2015-09-04 16:56 ` Li Yang
2015-09-04 20:16 ` Sharma Bhupesh
2015-09-04 21:12 ` Li Yang
2015-09-05 8:11 ` Sharma Bhupesh
2015-09-09 23:38 ` Li Yang
2015-09-04 6:57 ` [PATCH v2 04/10] doc/bindings: Update PCIe devicetree binding documentation for LS2080A Bhupesh Sharma
2015-09-04 17:56 ` Leo Li
2015-09-04 20:20 ` Sharma Bhupesh
2015-09-06 2:25 ` Lian M.H.
2015-09-06 20:00 ` Sharma Bhupesh
2015-09-07 11:32 ` Arnd Bergmann [this message]
2015-09-08 20:06 ` Li Yang
2015-09-09 3:45 ` Sharma Bhupesh
2015-09-09 9:07 ` Arnd Bergmann
2015-09-09 23:50 ` Li Yang
2015-09-10 1:52 ` Lian M.H.
2015-09-04 6:57 ` [PATCH v2 05/10] doc/bindings: Update clk-qoriq bindings for FSL's chassis-3.0 SoCs Bhupesh Sharma
2015-09-09 16:46 ` Scott Wood
2015-09-04 6:57 ` [PATCH v2 06/10] clk: qoriq: Add ls2080a support Bhupesh Sharma
2015-09-04 20:01 ` Li Yang
2015-09-04 20:09 ` Sharma Bhupesh
2015-09-04 21:06 ` Li Yang
2015-09-09 16:41 ` Scott Wood
2015-09-09 16:39 ` Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=80094129.LHZFOe1ZPU@wuerfel \
--to=arnd@arndb.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox