From: viresh.kumar@linaro.org (Viresh Kumar)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/6] clocksource: arm_arch_timer: Migrate to new 'set-state' interface
Date: Mon, 8 Jun 2015 19:10:42 +0530 [thread overview]
Message-ID: <80bb7da364daf25660d130513d386353ac78a640.1433768426.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <cover.1433768426.git.viresh.kumar@linaro.org>
Migrate arm_arch_timer driver to the new 'set-state' interface provided
by the clockevents core, the earlier 'set-mode' interface is marked
obsolete now.
This also enables us to implement callbacks for new states of clockevent
devices, for example: ONESHOT_STOPPED.
Cc: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/clocksource/arm_arch_timer.c | 61 ++++++++++++++++++------------------
1 file changed, 31 insertions(+), 30 deletions(-)
diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c
index 0aa135ddbf80..d0b0cf43b981 100644
--- a/drivers/clocksource/arm_arch_timer.c
+++ b/drivers/clocksource/arm_arch_timer.c
@@ -181,44 +181,44 @@ static irqreturn_t arch_timer_handler_virt_mem(int irq, void *dev_id)
return timer_handler(ARCH_TIMER_MEM_VIRT_ACCESS, evt);
}
-static __always_inline void timer_set_mode(const int access, int mode,
- struct clock_event_device *clk)
+static __always_inline void timer_shutdown(const int access,
+ struct clock_event_device *clk)
{
unsigned long ctrl;
- switch (mode) {
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
- ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
- arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
- break;
- default:
- break;
- }
+
+ ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL, clk);
+ ctrl &= ~ARCH_TIMER_CTRL_ENABLE;
+ arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl, clk);
}
-static void arch_timer_set_mode_virt(enum clock_event_mode mode,
- struct clock_event_device *clk)
+static int arch_timer_shutdown_virt(struct clock_event_device *clk)
{
- timer_set_mode(ARCH_TIMER_VIRT_ACCESS, mode, clk);
+ timer_shutdown(ARCH_TIMER_VIRT_ACCESS, clk);
+ return 0;
}
-static void arch_timer_set_mode_phys(enum clock_event_mode mode,
- struct clock_event_device *clk)
+static int arch_timer_shutdown_phys(struct clock_event_device *clk)
{
- timer_set_mode(ARCH_TIMER_PHYS_ACCESS, mode, clk);
+ timer_shutdown(ARCH_TIMER_PHYS_ACCESS, clk);
+ return 0;
}
-static void arch_timer_set_mode_virt_mem(enum clock_event_mode mode,
- struct clock_event_device *clk)
+static int arch_timer_shutdown_virt_mem(struct clock_event_device *clk)
{
- timer_set_mode(ARCH_TIMER_MEM_VIRT_ACCESS, mode, clk);
+ timer_shutdown(ARCH_TIMER_MEM_VIRT_ACCESS, clk);
+ return 0;
}
-static void arch_timer_set_mode_phys_mem(enum clock_event_mode mode,
- struct clock_event_device *clk)
+static int arch_timer_shutdown_phys_mem(struct clock_event_device *clk)
{
- timer_set_mode(ARCH_TIMER_MEM_PHYS_ACCESS, mode, clk);
+ timer_shutdown(ARCH_TIMER_MEM_PHYS_ACCESS, clk);
+ return 0;
+}
+
+static int arch_timer_set_oneshot(struct clock_event_device *clk)
+{
+ /* Nothing to do here */
+ return 0;
}
static __always_inline void set_next_event(const int access, unsigned long evt,
@@ -273,11 +273,11 @@ static void __arch_timer_setup(unsigned type,
clk->cpumask = cpumask_of(smp_processor_id());
if (arch_timer_use_virtual) {
clk->irq = arch_timer_ppi[VIRT_PPI];
- clk->set_mode = arch_timer_set_mode_virt;
+ clk->set_state_shutdown = arch_timer_shutdown_virt;
clk->set_next_event = arch_timer_set_next_event_virt;
} else {
clk->irq = arch_timer_ppi[PHYS_SECURE_PPI];
- clk->set_mode = arch_timer_set_mode_phys;
+ clk->set_state_shutdown = arch_timer_shutdown_phys;
clk->set_next_event = arch_timer_set_next_event_phys;
}
} else {
@@ -286,17 +286,18 @@ static void __arch_timer_setup(unsigned type,
clk->rating = 400;
clk->cpumask = cpu_all_mask;
if (arch_timer_mem_use_virtual) {
- clk->set_mode = arch_timer_set_mode_virt_mem;
+ clk->set_state_shutdown = arch_timer_shutdown_virt_mem;
clk->set_next_event =
arch_timer_set_next_event_virt_mem;
} else {
- clk->set_mode = arch_timer_set_mode_phys_mem;
+ clk->set_state_shutdown = arch_timer_shutdown_phys_mem;
clk->set_next_event =
arch_timer_set_next_event_phys_mem;
}
}
- clk->set_mode(CLOCK_EVT_MODE_SHUTDOWN, clk);
+ clk->set_state_oneshot = arch_timer_set_oneshot;
+ clk->set_state_shutdown(clk);
clockevents_config_and_register(clk, arch_timer_rate, 0xf, 0x7fffffff);
}
@@ -506,7 +507,7 @@ static void arch_timer_stop(struct clock_event_device *clk)
disable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI]);
}
- clk->set_mode(CLOCK_EVT_MODE_UNUSED, clk);
+ clk->set_state_shutdown(clk);
}
static int arch_timer_cpu_notify(struct notifier_block *self,
--
2.4.0
next prev parent reply other threads:[~2015-06-08 13:40 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-08 13:40 [PATCH 0/6] clockevent: Migrate to new 'set-state' interface Viresh Kumar
2015-06-08 13:40 ` Viresh Kumar [this message]
2015-06-11 12:23 ` [PATCH 1/6] clocksource: arm_arch_timer: " Daniel Lezcano
2015-06-11 12:57 ` Viresh Kumar
2015-06-08 13:40 ` [PATCH 2/6] clocksource: arm_global_timer: " Viresh Kumar
2015-06-11 14:49 ` Daniel Lezcano
2015-06-11 14:56 ` Viresh Kumar
2015-06-11 14:58 ` Daniel Lezcano
2015-06-12 8:39 ` Srinivas Kandagatla
2015-06-12 8:51 ` Viresh Kumar
2015-06-08 13:40 ` [PATCH 3/6] clocksource: bcm2835: " Viresh Kumar
2015-06-11 15:25 ` Daniel Lezcano
2015-06-11 16:00 ` Viresh Kumar
2015-06-11 16:13 ` Daniel Lezcano
2015-06-11 16:27 ` Viresh Kumar
2015-06-08 13:40 ` [PATCH 4/6] clocksource: bcm_kona: " Viresh Kumar
2015-06-08 16:09 ` Ray Jui
2015-06-08 16:22 ` Viresh Kumar
2015-06-08 16:30 ` Ray Jui
2015-06-08 17:10 ` Ray Jui
2015-06-08 13:40 ` [PATCH 5/6] clocksource: cs5535: " Viresh Kumar
2015-06-11 15:50 ` Daniel Lezcano
2015-06-08 13:40 ` [PATCH 6/6] clocksource: em_sti: " Viresh Kumar
2015-06-11 15:53 ` Daniel Lezcano
2015-06-11 12:08 ` [PATCH 0/6] clockevent: " Daniel Lezcano
2015-06-11 13:00 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=80bb7da364daf25660d130513d386353ac78a640.1433768426.git.viresh.kumar@linaro.org \
--to=viresh.kumar@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).