From: Marc Zyngier <maz@kernel.org>
To: Christian Hewitt <christianshewitt@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Kevin Hilman <khilman@baylibre.com>,
Neil Armstrong <narmstrong@baylibre.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v2 2/2] arm64: dts: meson: remove CPU opps below 1GHz for SM1 boards
Date: Thu, 10 Feb 2022 10:36:02 +0000 [thread overview]
Message-ID: <8211344a481dd40f260106bdd3f03bfb@kernel.org> (raw)
In-Reply-To: <20220210100638.19130-3-christianshewitt@gmail.com>
On 2022-02-10 10:06, Christian Hewitt wrote:
> Amlogic SM1 devices experience CPU stalls and random board wedges when
> the system idles and CPU cores clock down to lower opp points. Recent
> vendor kernels include a change to remove 100-250MHz and other distro
> sources also remove the 500/667MHz points. Unless all 100-667Mhz opps
> are removed or the CPU governor forced to performance stalls are still
> observed, so let's remove them to improve stability and uptime.
>
> Fixes: 3d9e76483049 ("arm64: dts: meson-sm1-sei610: enable DVFS")
> Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
> ---
> arch/arm64/boot/dts/amlogic/meson-sm1.dtsi | 20 --------------------
> 1 file changed, 20 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> index 3c07a89bfd27..80737731af3f 100644
> --- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> +++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
> @@ -95,26 +95,6 @@
> compatible = "operating-points-v2";
> opp-shared;
>
> - opp-100000000 {
> - opp-hz = /bits/ 64 <100000000>;
> - opp-microvolt = <730000>;
> - };
> -
> - opp-250000000 {
> - opp-hz = /bits/ 64 <250000000>;
> - opp-microvolt = <730000>;
> - };
> -
> - opp-500000000 {
> - opp-hz = /bits/ 64 <500000000>;
> - opp-microvolt = <730000>;
> - };
> -
> - opp-667000000 {
> - opp-hz = /bits/ 64 <666666666>;
> - opp-microvolt = <750000>;
> - };
> -
> opp-1000000000 {
> opp-hz = /bits/ 64 <1000000000>;
> opp-microvolt = <770000>;
That's not nearly enough. If that's an actual issue, the driver
should be updated not to use these OPPs, and you can't assume
that people will just update their DT (mine comes from u-boot,
and it is unlikely I will update it anytime soon).
Thanks,
M.
--
Jazz is not dead. It just smells funny...
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-02-10 10:37 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-02-10 10:06 [PATCH v2 0/2] arm64: dts: meson: remove CPU opps below 1GHz for G12B/SM1 Christian Hewitt
2022-02-10 10:06 ` [PATCH v2 1/2] arm64: dts: meson: remove CPU opps below 1GHz for G12B boards Christian Hewitt
2022-04-04 7:50 ` Neil Armstrong
2022-02-10 10:06 ` [PATCH v2 2/2] arm64: dts: meson: remove CPU opps below 1GHz for SM1 boards Christian Hewitt
2022-02-10 10:36 ` Marc Zyngier [this message]
2022-02-11 9:25 ` Neil Armstrong
2022-04-04 7:50 ` Neil Armstrong
2022-04-04 7:53 ` [PATCH v2 0/2] arm64: dts: meson: remove CPU opps below 1GHz for G12B/SM1 Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=8211344a481dd40f260106bdd3f03bfb@kernel.org \
--to=maz@kernel.org \
--cc=christianshewitt@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=narmstrong@baylibre.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).