From mboxrd@z Thu Jan  1 00:00:00 1970
From: f.fainelli@gmail.com (Florian Fainelli)
Date: Tue, 11 Apr 2017 10:01:29 -0700
Subject: [RFC PATCH 0/3] clk: introduce clk_bulk_get accessories
In-Reply-To: <1491969809-20154-1-git-send-email-aisheng.dong@nxp.com>
References: <1491969809-20154-1-git-send-email-aisheng.dong@nxp.com>
Message-ID: <86200633-8349-f1c3-f4d8-a130a26381f7@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

On 04/11/2017 09:03 PM, Dong Aisheng wrote:
> These helper function allows drivers to get several clk consumers in
> one operation.  If any of the clk cannot be acquired then any clks
> that were got will be put before returning to the caller.
> 
> The idea firstly came out when i wanted to clean up and optimize
> imx6q-cpufreq driver which needs to handle a lot of clocks as it
> becomes a bit mess.
> 
> e.g. drivers/cpufreq/imx6q-cpufreq.c
> 
> You will see we need get 7 clocks during driver probe.
> (Add there will be more, e.g. pll1, pll1_bypass, pll1_bypass_src,
> in the future when adding busfreq support).
> 
> static int imx6q_cpufreq_probe(struct platform_device *pdev)
> {
> ....
> 	arm_clk = clk_get(cpu_dev, "arm");
> 	pll1_sys_clk = clk_get(cpu_dev, "pll1_sys");
> 	pll1_sw_clk = clk_get(cpu_dev, "pll1_sw");
> 	step_clk = clk_get(cpu_dev, "step");
> 	pll2_pfd2_396m_clk = clk_get(cpu_dev, "pll2_pfd2_396m");
> 	if (IS_ERR(arm_clk) || IS_ERR(pll1_sys_clk) || IS_ERR(pll1_sw_clk) ||
> 	    IS_ERR(step_clk) || IS_ERR(pll2_pfd2_396m_clk)) {
> 		dev_err(cpu_dev, "failed to get clocks\n");
> 		ret = -ENOENT;
> 		goto put_clk;
> 	}
> 
> 	if (of_machine_is_compatible("fsl,imx6ul")) {
> 		pll2_bus_clk = clk_get(cpu_dev, "pll2_bus");
> 		secondary_sel_clk = clk_get(cpu_dev, "secondary_sel");
> 		if (IS_ERR(pll2_bus_clk) || IS_ERR(secondary_sel_clk)) {
> 			dev_err(cpu_dev, "failed to get clocks specific to imx6ul\n");
> 			ret = -ENOENT;
> 			goto put_clk;
> 		}
> 	}
> ....
> put_clk: 
>         if (!IS_ERR(arm_clk))
>                 clk_put(arm_clk);
>         if (!IS_ERR(pll1_sys_clk))
>                 clk_put(pll1_sys_clk);
> 	...........
> }
> 
> Together with the err path handling for each clocks, it does make
> things a bit ugly.
> 
> Since we already have regulator_bulk_get accessories, i thought we
> probably could introduce clk_bulk_get as well to handle such case to
> ease the driver owners' life. 
> 
> Besides IMX cpufreq driver, there is also some similar cases
> in kernel which could befinit from this api as well.
> e.g.
> drivers/cpufreq/tegra124-cpufreq.c
> drivers/cpufreq/s3c2412-cpufreq.c
> sound/soc/samsung/smdk_spdif.c
> arch/arm/mach-omap1/serial.c
> ...
> 
> And actually, if we handle clocks more than 3, then it might be
> worthy to try, which there is quite many manay in kernel and
> that probably could save a lot codes.
> 
> This is a RFC patch intending to bring up the idea to discuss.
> 
> Comments are welcome and appreciated!

Thanks a lot for doing this, we have historically done something similar
on ARCH_BRCMSTB platforms in our downstream tree with a concept of a
"software" clock which has multiple parents (yikes), using the bulk
accessors would essentially allow us to remove part of this hack, so I
am all in favor of this!

> 
> Dong Aisheng (3):
>   clk: add clk_bulk_get accessories
>   clk: add managed version of clk_bulk_get
>   cpufreq: imx6q: refine clk operations
> 
>  drivers/clk/clk-devres.c        |  36 +++++++++++
>  drivers/clk/clk.c               |  99 +++++++++++++++++++++++++++++
>  drivers/clk/clkdev.c            |  42 +++++++++++++
>  drivers/cpufreq/imx6q-cpufreq.c | 119 ++++++++++++++++-------------------
>  include/linux/clk.h             | 135 ++++++++++++++++++++++++++++++++++++++++
>  5 files changed, 365 insertions(+), 66 deletions(-)
> 


-- 
Florian