From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.lore.kernel.org (Postfix) with ESMTPS id F2288CFD647 for ; Wed, 7 Jan 2026 15:22:36 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20210309; h=Sender:List-Subscribe:List-Help :List-Post:List-Archive:List-Unsubscribe:List-Id:Content-Transfer-Encoding: Content-Type:In-Reply-To:From:References:Cc:To:Subject:MIME-Version:Date: Message-ID:Reply-To:Content-ID:Content-Description:Resent-Date:Resent-From: Resent-Sender:Resent-To:Resent-Cc:Resent-Message-ID:List-Owner; bh=J0Pws4NtPsPRxukEoeD3BXEjgSe94jnWPW/vfPUBfDg=; b=Ler0frzvcKr0eTIDP8f9kkxkXm fqnk0v6WUZT2JZUaiGr+f+FMNJzqwAdwLKZY5zzX1uvJjrfEFWheOGqvpGUOsPVva9CsihKI6CZzt 5YCkrxRzaboVA0HraG5tEVid8kw2uBF3+mcnjSBzl/eSYclzD2wqWQ0zxhTP2KWCkWEJsuP/1YRxu rZXkLESNbd952PM+I1QJsvHxSdWUFD8B8CR6xfb2rjjLZUTXjgoiFuFsYNAyylKSZflJsWRoE/dW6 LGk7Kt4z5jXEJJT5MzxMSqAf7rTEe/AVykr1U+dwDY6eJz/IsMZ27tc1OjrQGB2aJwr85u1bhE/AT oBfebrTA==; Received: from localhost ([::1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.98.2 #2 (Red Hat Linux)) id 1vdVMh-0000000FATG-23vx; Wed, 07 Jan 2026 15:22:27 +0000 Received: from mail-wm1-x334.google.com ([2a00:1450:4864:20::334]) by bombadil.infradead.org with esmtps (Exim 4.98.2 #2 (Red Hat Linux)) id 1vdVMe-0000000FAST-2fap for linux-arm-kernel@lists.infradead.org; Wed, 07 Jan 2026 15:22:26 +0000 Received: by mail-wm1-x334.google.com with SMTP id 5b1f17b1804b1-477a219dbcaso18335195e9.3 for ; Wed, 07 Jan 2026 07:22:23 -0800 (PST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=linaro.org; s=google; t=1767799342; x=1768404142; darn=lists.infradead.org; h=content-transfer-encoding:in-reply-to:from:content-language :references:cc:to:subject:user-agent:mime-version:date:message-id :from:to:cc:subject:date:message-id:reply-to; bh=J0Pws4NtPsPRxukEoeD3BXEjgSe94jnWPW/vfPUBfDg=; b=oUxPomFLx6XUug7+CHNwTKrMn0TVhTD8dQxSx+03XlBtbunaGBgsv00a6J9EpaIWaj oXBzV9eEjIfydxXBytT5R93ReDE8TaJ1l7Q4JOANc5KCuHFJfmzti8I2lPKh0U008z73 zcpeJgJZF8itL9aPWYoJ2ibtOvdM90QXdGr8Cq+TJq3RPUPMudonU/SSWrsJ/9AsU2/O MDlg4bJWpUgAqQ2wgohcVHiPj8P0tg/SmpF/gQpR3/VR3Wtj03QBHBT9MrRSvE/2QE/x X7gCrmgblHN8DLMQBo92lHG007YsGd6Hqg9ylO96yOg7nvdlK4G1HG6m3et9kqX9WZ7a BXPw== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20230601; t=1767799342; x=1768404142; h=content-transfer-encoding:in-reply-to:from:content-language :references:cc:to:subject:user-agent:mime-version:date:message-id :x-gm-gg:x-gm-message-state:from:to:cc:subject:date:message-id :reply-to; bh=J0Pws4NtPsPRxukEoeD3BXEjgSe94jnWPW/vfPUBfDg=; b=UO4T568Er05pxQ6V1QHWFPts0dNE7AmPZWFMMNPiFJKmf1wYqlZCL1h3N/GwQB++7g fSw+JxUEd5BR4YxYk2XiscXmDUy/DCeiiF0oY74D6JzGkcrKBuRLEz0iIAFgChkpaCn5 HZJMbgMVGu/FJ/QemZklt8gLXl7eIKdncqN/lMRORT+TXZRC+nNGp5WjjpjA3FC9ywWs 4DH19Q0GIYqCNX8M+Qc4V4k8PBrwu1XXq6qnFCLw4ypCv92ZVJRDJmHd7XyAjbmIG3WB TXVwwDZeqhqK8mAe3fvcnx5zDedsVJutjGIEr1P9zemQnpyLGQFBTraBp5zwCclUgeD9 GuzA== X-Forwarded-Encrypted: i=1; AJvYcCW9bP741KQoA2cNbnmRmG+mwjyCyZ02SA2QujOFp2TBUC+ay2xxROEvzQ/DMnVTQt3VeE6ORpUIEMvt0F6IUzqe@lists.infradead.org X-Gm-Message-State: AOJu0Yyw8BZQCyNa/C1z03Rwi6YJRVT3M7hYv+lxlexR8N/4CNlc4/dh h7KudirLLCkjF0UHGJQnnvLnFSDS5LKDIgUKQ3op62eunpB26JThFC7McvTaFXteGEg= X-Gm-Gg: AY/fxX6hifyrjXlDAi8dZnS49QlwMJatRfiZRR+9cHfRFCFXS0pZh60BwYel8sFhqPf sy3tQevxiXUs/wSDf20mO665xILJMmPyPUxjJHNPjaOnQrhhOnqEEZe8RtIcoE/sTU6Hh8nfkkQ bkhvOXqVEsQQGPe4W1CfSSFQ6vvtfgL2vnOrI+Ed01nRmZLd7SnvFEd2XeIOIVvtv53a7LoEhVg 5zOEQzZ3U0cZKMLMgiNv8uxZlG0tIcmw4SpBXEOahh0jlh+5i0hHPShVdI2BhzJQGRtHBLlHJr4 K2rRDj/MXmQEqulF2zgUqM1uNq4O0V5T8cAKi7qn6IdLN0f/vDlklO9JXxJLqZDc1+baWtCG3ml B42ZgfTRDC18zRGYsQgrKSHeEhfSoWODc/Kuegh8efs/V+7EufnGoZQPd/K4dd2l3GGJ8B+Lhno 2s098bqx19DVS0UbObDYMyeVVFPfi0SXQKsJzj7PVNDlP2s8KqpmskzHVX7GPPCvwGsg== X-Google-Smtp-Source: AGHT+IFoLsxtQi0WIUi1v3LIMML3pRO8IdEjUBUo95e82dMoSm2M06CCFS48DLPXjrbdM1PsiseKLw== X-Received: by 2002:a05:600c:4e16:b0:477:df3:1453 with SMTP id 5b1f17b1804b1-47d84b3a064mr36947125e9.28.1767799342054; Wed, 07 Jan 2026 07:22:22 -0800 (PST) Received: from ?IPV6:2a05:6e02:1041:c10:edca:100f:ed11:66f2? ([2a05:6e02:1041:c10:edca:100f:ed11:66f2]) by smtp.googlemail.com with ESMTPSA id 5b1f17b1804b1-47d8702534dsm16861105e9.2.2026.01.07.07.22.20 (version=TLS1_3 cipher=TLS_AES_128_GCM_SHA256 bits=128/128); Wed, 07 Jan 2026 07:22:21 -0800 (PST) Message-ID: <86748f89-8bed-4435-98c4-991e649e5b87@linaro.org> Date: Wed, 7 Jan 2026 16:22:20 +0100 MIME-Version: 1.0 User-Agent: Mozilla Thunderbird Subject: Re: [PATCH v7 2/3] thermal: imx91: Add support for i.MX91 thermal monitoring unit To: Frank Li , "Rafael J. Wysocki" , Zhang Rui , Lukasz Luba , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Shawn Guo , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , Pengfei Li , Marco Felsch Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, ye.li@nxp.com, joy.zou@nxp.com, Peng Fan References: <20251020-imx91tmu-v7-0-48d7d9f25055@nxp.com> <20251020-imx91tmu-v7-2-48d7d9f25055@nxp.com> Content-Language: en-US From: Daniel Lezcano In-Reply-To: <20251020-imx91tmu-v7-2-48d7d9f25055@nxp.com> Content-Type: text/plain; charset=UTF-8; format=flowed Content-Transfer-Encoding: 8bit X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20260107_072224_852650_26FE0F72 X-CRM114-Status: GOOD ( 43.02 ) X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.34 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: "linux-arm-kernel" Errors-To: linux-arm-kernel-bounces+linux-arm-kernel=archiver.kernel.org@lists.infradead.org On 10/20/25 21:00, Frank Li wrote: > From: Pengfei Li > > Introduce support for the i.MX91 thermal monitoring unit, which features a > single sensor for the CPU. The register layout differs from other chips, > necessitating the creation of a dedicated file for this. > > This sensor provides a resolution of 1/64°C (6-bit fraction). For actual > accuracy, refer to the datasheet, as it varies depending on the chip grade. > Provide an interrupt for end of measurement and threshold violation and > Contain temperature threshold comparators, in normal and secure address > space, with direction and threshold programmability. > > Datasheet Link: https://www.nxp.com/docs/en/data-sheet/IMX91CEC.pdf > > Signed-off-by: Pengfei Li > Signed-off-by: Peng Fan > Signed-off-by: Frank Li > --- > Change in v7 > - remove enable field because framework already check mode before call > get_temp(); > - only call runtime_pm_get(put) in set_mode function > - remove enable irq at get_temp. > - Enable GE compare irq at set_trip() call back > - Config GE irq at set_mode() when start measure to avoid issue unnecessary > irq when clear Compare mask (generate one LE irq). > > Change from v5 to v6 > - remove Macro's review tag > - remove mutex lock > - use set_trips callback > > Change from v4 to v5 > - add irq support > - use period mode > - Marco, if need drop review tag, let me know > > Change from v3 to v4 > - Add Macro's review tag > - Use devm_add_action() > - Move pm_runtim_put before thermal_of_zone_register() > > change from v2 to v3 > - add IMX91_TMU_ prefix for register define > - remove unused register define > - fix missed pm_runtime_put() at error path in imx91_tmu_get_temp() > - use dev variable in probe function > - use pm_runtime_set_active() in probe > - move START to imx91_tmu_get_temp() > - use DEFINE_RUNTIME_DEV_PM_OPS() > - keep set reset value because there are not sw "reset" bit in controller, > uboot may change and enable tmu. > > change from v1 to v2 > - use low case for hexvalue > - combine struct imx91_tmu and tmu_sensor > - simplify imx91_tmu_start() and imx91_tmu_enable() > - use s16 for imx91_tmu_get_temp(), which may negative value > - use reverse christmas tree style > - use run time pm > - use oneshot to sample temp > - register thermal zone after hardware init > --- > drivers/thermal/Kconfig | 10 ++ > drivers/thermal/Makefile | 1 + > drivers/thermal/imx91_thermal.c | 384 ++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 395 insertions(+) > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index a09c188b9ad11377afe232d89c60504eb7000417..b10080d618604ddd90295bff973e337ae0509059 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -296,6 +296,16 @@ config IMX8MM_THERMAL > cpufreq is used as the cooling device to throttle CPUs when the passive > trip is crossed. > > +config IMX91_THERMAL > + tristate "Temperature sensor driver for NXP i.MX91 SoC" > + depends on ARCH_MXC || COMPILE_TEST > + depends on OF > + help > + Include one sensor and six comparators. Each of them compares the > + temperature value (from the sensor) against the programmable > + threshold values. The direction of the comparison is configurable > + (greater / lesser than). > + > config K3_THERMAL > tristate "Texas Instruments K3 thermal support" > depends on ARCH_K3 || COMPILE_TEST > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile > index d7718978db245faffba98ff95a07c7bcbc776fd2..bb21e7ea7fc6b70aa84e5fed7cfdc7096e3fb1f7 100644 > --- a/drivers/thermal/Makefile > +++ b/drivers/thermal/Makefile > @@ -51,6 +51,7 @@ obj-$(CONFIG_ARMADA_THERMAL) += armada_thermal.o > obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o > obj-$(CONFIG_IMX_SC_THERMAL) += imx_sc_thermal.o > obj-$(CONFIG_IMX8MM_THERMAL) += imx8mm_thermal.o > +obj-$(CONFIG_IMX91_THERMAL) += imx91_thermal.o > obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o > obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o > obj-$(CONFIG_DA9062_THERMAL) += da9062-thermal.o > diff --git a/drivers/thermal/imx91_thermal.c b/drivers/thermal/imx91_thermal.c > new file mode 100644 > index 0000000000000000000000000000000000000000..9b20be03d6dec18553967548d0ca31d1c1fb387c > --- /dev/null > +++ b/drivers/thermal/imx91_thermal.c > @@ -0,0 +1,384 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright 2025 NXP. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +#define REG_SET 0x4 > +#define REG_CLR 0x8 > +#define REG_TOG 0xc > + > +#define IMX91_TMU_CTRL0 0x0 > +#define IMX91_TMU_CTRL0_THR1_IE BIT(9) > +#define IMX91_TMU_CTRL0_THR1_MASK GENMASK(3, 2) > +#define IMX91_TMU_CTRL0_CLR_FLT1 BIT(21) > + > +#define IMX91_TMU_THR_MODE_LE 0 > +#define IMX91_TMU_THR_MODE_GE 1 > + > +#define IMX91_TMU_STAT0 0x10 > +#define IMX91_TMU_STAT0_THR1_IF BIT(9) > +#define IMX91_TMU_STAT0_THR1_STAT BIT(13) > +#define IMX91_TMU_STAT0_DRDY0_IF_MASK BIT(16) > + > +#define IMX91_TMU_DATA0 0x20 > + > +#define IMX91_TMU_CTRL1 0x200 > +#define IMX91_TMU_CTRL1_EN BIT(31) > +#define IMX91_TMU_CTRL1_START BIT(30) > +#define IMX91_TMU_CTRL1_STOP BIT(29) > +#define IMX91_TMU_CTRL1_RES_MASK GENMASK(19, 18) > +#define IMX91_TMU_CTRL1_MEAS_MODE_MASK GENMASK(25, 24) > +#define IMX91_TMU_CTRL1_MEAS_MODE_SINGLE 0 > +#define IMX91_TMU_CTRL1_MEAS_MODE_CONTINUES 1 > +#define IMX91_TMU_CTRL1_MEAS_MODE_PERIODIC 2 > + > +#define IMX91_TMU_THR_CTRL01 0x30 > +#define IMX91_TMU_THR_CTRL01_THR1_MASK GENMASK(31, 16) > + > +#define IMX91_TMU_REF_DIV 0x280 > +#define IMX91_TMU_DIV_EN BIT(31) > +#define IMX91_TMU_DIV_MASK GENMASK(23, 16) > +#define IMX91_TMU_DIV_MAX 255 > + > +#define IMX91_TMU_PUD_ST_CTRL 0x2b0 > +#define IMX91_TMU_PUDL_MASK GENMASK(23, 16) > + > +#define IMX91_TMU_TRIM1 0x2e0 > +#define IMX91_TMU_TRIM2 0x2f0 > + > +#define IMX91_TMU_TEMP_LOW_LIMIT -40000 > +#define IMX91_TMU_TEMP_HIGH_LIMIT 125000 > + > +#define IMX91_TMU_DEFAULT_TRIM1_CONFIG 0xb561bc2d > +#define IMX91_TMU_DEFAULT_TRIM2_CONFIG 0x65d4 > + > +#define IMX91_TMU_PERIOD_CTRL 0x270 > +#define IMX91_TMU_PERIOD_CTRL_MEAS_MASK GENMASK(23, 0) > + > +#define IMX91_TMP_FRAC 64 > + > +struct imx91_tmu { > + void __iomem *base; > + struct clk *clk; > + struct device *dev; > + struct thermal_zone_device *tzd; > +}; > + > +static void imx91_tmu_start(struct imx91_tmu *tmu, bool start) > +{ > + u32 val = start ? IMX91_TMU_CTRL1_START : IMX91_TMU_CTRL1_STOP; > + > + writel_relaxed(val, tmu->base + IMX91_TMU_CTRL1 + REG_SET); Why do you need the 'relaxed' version of the readl / writel ? > +} > + > +static void imx91_tmu_enable(struct imx91_tmu *tmu, bool enable) > +{ > + u32 reg = IMX91_TMU_CTRL1; > + > + reg += enable ? REG_SET : REG_CLR; > + > + writel_relaxed(IMX91_TMU_CTRL1_EN, tmu->base + reg); > +} Can you explain the register layout ? It is unclear how it starts / stops / is enabled ... For instance doing reg += enable ? REG_SET : REG_CLR is confusing > +static int imx91_tmu_to_mcelsius(int x) (short x) > +{ > + return x * MILLIDEGREE_PER_DEGREE / IMX91_TMP_FRAC; > +} > + > +static int imx91_tmu_from_mcelsius(int x) > +{ > + return x * IMX91_TMP_FRAC / MILLIDEGREE_PER_DEGREE; > +}> +static int imx91_tmu_get_temp(struct thermal_zone_device *tz, int *temp) > +{ > + struct imx91_tmu *tmu = thermal_zone_device_priv(tz); > + s16 data; > + > + /* DATA0 is 16bit signed number */ > + data = readw_relaxed(tmu->base + IMX91_TMU_DATA0); Does the routine works for a negative value ? > + *temp = imx91_tmu_to_mcelsius(data); > + > + return 0; > +} > + > +static int imx91_tmu_set_trips(struct thermal_zone_device *tz, int low, int high) > +{ > + struct imx91_tmu *tmu = thermal_zone_device_priv(tz); > + int val; > + > + if (high >= IMX91_TMU_TEMP_HIGH_LIMIT) > + return -EINVAL; > + > + writel_relaxed(IMX91_TMU_CTRL0_THR1_IE, tmu->base + IMX91_TMU_CTRL0 + REG_CLR); > + > + /* Comparator1 for temperature threshold */ > + writel_relaxed(IMX91_TMU_THR_CTRL01_THR1_MASK, tmu->base + IMX91_TMU_THR_CTRL01 + REG_CLR); > + val = FIELD_PREP(IMX91_TMU_THR_CTRL01_THR1_MASK, imx91_tmu_from_mcelsius(high)); > + > + writel_relaxed(val, tmu->base + IMX91_TMU_THR_CTRL01 + REG_SET); > + > + writel_relaxed(IMX91_TMU_STAT0_THR1_IF, tmu->base + IMX91_TMU_STAT0 + REG_CLR); > + > + writel_relaxed(IMX91_TMU_CTRL0_THR1_IE, tmu->base + IMX91_TMU_CTRL0 + REG_SET); > + IMO, it is a good practice to wrap those calls into single line functions with a self-explanatory name > + return 0; > +} > + > +static int imx91_init_from_nvmem_cells(struct imx91_tmu *tmu) > +{ > + struct device *dev = tmu->dev; > + u32 trim1, trim2; > + int ret; > + > + ret = nvmem_cell_read_u32(dev, "trim1", &trim1); > + if (ret) > + return ret; > + > + ret = nvmem_cell_read_u32(dev, "trim2", &trim2); > + if (ret) > + return ret; > + > + if (trim1 == 0 || trim2 == 0) > + return -EINVAL; > + > + writel_relaxed(trim1, tmu->base + IMX91_TMU_TRIM1); > + writel_relaxed(trim2, tmu->base + IMX91_TMU_TRIM2); > + > + return 0; > +} > + > +static void imx91_tmu_action_remove(void *data) > +{ > + struct imx91_tmu *tmu = data; > + > + /* disable tmu */ > + imx91_tmu_enable(tmu, false); > +} > + > +static irqreturn_t imx91_tmu_alarm_irq(int irq, void *data) > +{ > + struct imx91_tmu *tmu = data; > + u32 val; > + > + val = readl_relaxed(tmu->base + IMX91_TMU_STAT0); > + > + /* Check if comparison interrupt occurred */ > + if (val & IMX91_TMU_STAT0_THR1_IF) { > + /* Clear irq flag and disable interrupt until reconfigured */ > + writel(IMX91_TMU_STAT0_THR1_IF, tmu->base + IMX91_TMU_STAT0 + REG_CLR); > + writel_relaxed(IMX91_TMU_CTRL0_THR1_IE, tmu->base + IMX91_TMU_CTRL0 + REG_CLR); > + > + return IRQ_WAKE_THREAD; > + } > + > + return IRQ_NONE; Why is this routine needed ? Is it a shared interrupt ? > +} > + > +static irqreturn_t imx91_tmu_alarm_irq_thread(int irq, void *data) > +{ > + struct imx91_tmu *tmu = data; > + > + thermal_zone_device_update(tmu->tzd, THERMAL_EVENT_UNSPECIFIED); > + > + return IRQ_HANDLED; > +} > + > +static int imx91_tmu_change_mode(struct thermal_zone_device *tz, enum thermal_device_mode mode) > +{ > + struct imx91_tmu *tmu = thermal_zone_device_priv(tz); > + int ret; > + > + if (mode == THERMAL_DEVICE_ENABLED) { > + ret = pm_runtime_get(tmu->dev); > + if (ret < 0) > + return ret; > + > + writel_relaxed(IMX91_TMU_CTRL0_THR1_IE | IMX91_TMU_CTRL0_THR1_MASK, > + tmu->base + IMX91_TMU_CTRL0 + REG_CLR); > + > + writel_relaxed(FIELD_PREP(IMX91_TMU_CTRL0_THR1_MASK, IMX91_TMU_THR_MODE_GE), > + tmu->base + IMX91_TMU_CTRL0 + REG_SET); > + imx91_tmu_start(tmu, true); > + } else { > + writel_relaxed(IMX91_TMU_CTRL0_THR1_IE, tmu->base + IMX91_TMU_CTRL0 + REG_CLR); > + imx91_tmu_start(tmu, false); > + pm_runtime_put(tmu->dev); > + } > + > + return 0; > +} > + > +static struct thermal_zone_device_ops tmu_tz_ops = { > + .get_temp = imx91_tmu_get_temp, > + .change_mode = imx91_tmu_change_mode, > + .set_trips = imx91_tmu_set_trips, > +}; > + > +static int imx91_tmu_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct imx91_tmu *tmu; > + unsigned long rate; > + int irq, ret; > + u32 div; > + > + tmu = devm_kzalloc(dev, sizeof(struct imx91_tmu), GFP_KERNEL); > + if (!tmu) > + return -ENOMEM; > + > + tmu->dev = dev; > + > + tmu->base = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(tmu->base)) > + return dev_err_probe(dev, PTR_ERR(tmu->base), "failed to get io resource"); > + > + tmu->clk = devm_clk_get_enabled(dev, NULL); > + if (IS_ERR(tmu->clk)) > + return dev_err_probe(dev, PTR_ERR(tmu->clk), "failed to get tmu clock\n"); > + > + platform_set_drvdata(pdev, tmu); > + > + /* disable the monitor during initialization */ > + imx91_tmu_enable(tmu, false); > + imx91_tmu_start(tmu, false); > + > + ret = imx91_init_from_nvmem_cells(tmu); > + if (ret) { > + dev_warn(dev, "can't get trim value, use default settings\n"); > + > + writel_relaxed(IMX91_TMU_DEFAULT_TRIM1_CONFIG, tmu->base + IMX91_TMU_TRIM1); > + writel_relaxed(IMX91_TMU_DEFAULT_TRIM2_CONFIG, tmu->base + IMX91_TMU_TRIM2); > + } > + > + /* The typical conv clk is 4MHz, the output freq is 'rate / (div + 1)' */ > + rate = clk_get_rate(tmu->clk); > + div = (rate / (4 * HZ_PER_MHZ)) - 1; > + if (div > IMX91_TMU_DIV_MAX) > + return dev_err_probe(dev, -EINVAL, "clock divider exceed hardware limitation"); > + > + /* Set divider value and enable divider */ > + writel_relaxed(IMX91_TMU_DIV_EN | FIELD_PREP(IMX91_TMU_DIV_MASK, div), > + tmu->base + IMX91_TMU_REF_DIV); > + > + /* Set max power up delay: 'Tpud(ms) = 0xFF * 1000 / 4000000' */ > + writel_relaxed(FIELD_PREP(IMX91_TMU_PUDL_MASK, 100U), tmu->base + IMX91_TMU_PUD_ST_CTRL); > + > + /* > + * Set resolution mode > + * 00b - Conversion time = 0.59325 ms > + * 01b - Conversion time = 1.10525 ms > + * 10b - Conversion time = 2.12925 ms > + * 11b - Conversion time = 4.17725 ms > + */ > + writel_relaxed(FIELD_PREP(IMX91_TMU_CTRL1_RES_MASK, 0x3), > + tmu->base + IMX91_TMU_CTRL1 + REG_CLR); > + writel_relaxed(FIELD_PREP(IMX91_TMU_CTRL1_RES_MASK, 0x1), > + tmu->base + IMX91_TMU_CTRL1 + REG_SET); > + > + writel_relaxed(IMX91_TMU_CTRL1_MEAS_MODE_MASK, tmu->base + IMX91_TMU_CTRL1 + REG_CLR); > + writel_relaxed(FIELD_PREP(IMX91_TMU_CTRL1_MEAS_MODE_MASK, > + IMX91_TMU_CTRL1_MEAS_MODE_PERIODIC), > + tmu->base + IMX91_TMU_CTRL1 + REG_SET); > + > + /* > + * Set Periodic Measurement Frequency to 25Hz: > + * tMEAS_FREQ = tCONV_CLK * PERIOD_CTRL[MEAS_FREQ] > + */ > + writel_relaxed(FIELD_PREP(IMX91_TMU_PERIOD_CTRL_MEAS_MASK, 4 * HZ_PER_MHZ / 25), > + tmu->base + IMX91_TMU_PERIOD_CTRL); > + > + imx91_tmu_enable(tmu, true); > + ret = devm_add_action(dev, imx91_tmu_action_remove, tmu); > + if (ret) > + return dev_err_probe(dev, ret, "Failure to add action imx91_tmu_action_remove()\n"); > + > + pm_runtime_set_active(dev); > + pm_runtime_get_noresume(dev); > + ret = devm_pm_runtime_enable(dev); > + if (ret) > + return ret; > + > + tmu->tzd = devm_thermal_of_zone_register(dev, 0, tmu, &tmu_tz_ops); > + if (IS_ERR(tmu->tzd)) > + return dev_err_probe(dev, PTR_ERR(tmu->tzd), > + "failed to register thermal zone sensor\n"); > + > + irq = platform_get_irq(pdev, 0); > + if (irq < 0) > + return irq; > + > + ret = devm_request_threaded_irq(dev, irq, imx91_tmu_alarm_irq, > + imx91_tmu_alarm_irq_thread, > + IRQF_ONESHOT, "imx91_thermal", tmu); > + > + if (ret < 0) > + return dev_err_probe(dev, ret, "failed to request alarm irq\n"); > + > + pm_runtime_put(dev); > + > + return 0; > +} > + > +static int imx91_tmu_runtime_suspend(struct device *dev) > +{ > + struct imx91_tmu *tmu = dev_get_drvdata(dev); > + > + /* disable tmu */ > + imx91_tmu_enable(tmu, false); > + > + clk_disable_unprepare(tmu->clk); > + > + return 0; > +} > + > +static int imx91_tmu_runtime_resume(struct device *dev) > +{ > + struct imx91_tmu *tmu = dev_get_drvdata(dev); > + int ret; > + > + ret = clk_prepare_enable(tmu->clk); > + if (ret) > + return ret; > + > + imx91_tmu_enable(tmu, true); > + > + return 0; > +} > + > +static DEFINE_RUNTIME_DEV_PM_OPS(imx91_tmu_pm_ops, imx91_tmu_runtime_suspend, > + imx91_tmu_runtime_resume, NULL); > + > +static const struct of_device_id imx91_tmu_table[] = { > + { .compatible = "fsl,imx91-tmu", }, > + { }, > +}; > +MODULE_DEVICE_TABLE(of, imx91_tmu_table); > + > +static struct platform_driver imx91_tmu = { > + .driver = { > + .name = "imx91_thermal", > + .pm = pm_ptr(&imx91_tmu_pm_ops), > + .of_match_table = imx91_tmu_table, > + }, > + .probe = imx91_tmu_probe, > +}; > +module_platform_driver(imx91_tmu); > + > +MODULE_AUTHOR("Peng Fan "); > +MODULE_DESCRIPTION("i.MX91 Thermal Monitor Unit driver"); > +MODULE_LICENSE("GPL"); > -- Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog