linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: Marc Zyngier <maz@kernel.org>
To: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org,
	Hanks Chen <hanks.chen@mediatek.com>,
	Cheng-Yuh.Wu@mediatek.com, linux-kernel@vger.kernel.org
Subject: Re: [PATCH] irqchip/gic-v3: Workaround for GIC-700 erratum 2941627
Date: Tue, 04 Jul 2023 15:44:50 +0100	[thread overview]
Message-ID: <86ttujwxb1.wl-maz@kernel.org> (raw)
In-Reply-To: <20230704123436.127449-1-lpieralisi@kernel.org>

Lorenzo,

On Tue, 04 Jul 2023 13:34:36 +0100,
Lorenzo Pieralisi <lpieralisi@kernel.org> wrote:
> 
> GIC700 erratum 2941627 may cause GIC-700 missing SPIs wake
> requests when SPIs are deactivated while targeting a
> sleeping CPU - ie a CPU for which the redistributor:
> 
> GICR_WAKER.ProcessorSleep == 1
> 
> This runtime situation can happen if an SPI that has been
> activated on a core is retargeted to a different core, it
> becomes pending and the target core subsequently enters a
> power state quiescing the respective redistributor.
> 
> When this situation is hit, the de-activation carried out
> on the core that activated the SPI (through either ICC_EOIR1_EL1
> or ICC_DIR_EL1 register writes) does not trigger a wake
> requests for the sleeping GIC redistributor even if the SPI
> is pending.
> 
> Fix the erratum by de-activating the SPI using the

s/Fix/ Work around/

> redistributor GICD_ICACTIVER register if the runtime
> conditions require it (ie the IRQ was retargeted between
> activation and de-activation).
> 
> Signed-off-by: Lorenzo Pieralisi <lpieralisi@kernel.org>
> Cc: Marc Zyngier <maz@kernel.org>
> ---
>  Documentation/arm64/silicon-errata.rst |  3 ++
>  drivers/irqchip/irq-gic-v3.c           | 71 +++++++++++++++++++++++++-
>  2 files changed, 73 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/arm64/silicon-errata.rst b/Documentation/arm64/silicon-errata.rst
> index 9e311bc43e05..e77c57a0adf8 100644
> --- a/Documentation/arm64/silicon-errata.rst
> +++ b/Documentation/arm64/silicon-errata.rst
> @@ -141,6 +141,9 @@ stable kernels.
>  | ARM            | MMU-500         | #841119,826419  | N/A                         |
>  +----------------+-----------------+-----------------+-----------------------------+
>  +----------------+-----------------+-----------------+-----------------------------+
> +| ARM            | GIC-700         | #2941627        | ARM64_ERRATUM_2941627       |
> ++----------------+-----------------+-----------------+-----------------------------+
> ++----------------+-----------------+-----------------+-----------------------------+
>  | Broadcom       | Brahma-B53      | N/A             | ARM64_ERRATUM_845719        |
>  +----------------+-----------------+-----------------+-----------------------------+
>  | Broadcom       | Brahma-B53      | N/A             | ARM64_ERRATUM_843419        |
> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c
> index a605aa79435a..a0a9ccf23742 100644
> --- a/drivers/irqchip/irq-gic-v3.c
> +++ b/drivers/irqchip/irq-gic-v3.c
> @@ -68,6 +68,8 @@ struct gic_chip_data {
>  static void __iomem *t241_dist_base_alias[T241_CHIPS_MAX] __read_mostly;
>  static DEFINE_STATIC_KEY_FALSE(gic_nvidia_t241_erratum);
>  
> +static DEFINE_STATIC_KEY_FALSE(gic_arm64_2941627_erratum);
> +
>  static struct gic_chip_data gic_data __read_mostly;
>  static DEFINE_STATIC_KEY_TRUE(supports_deactivate_key);
>  
> @@ -591,10 +593,35 @@ static void gic_irq_nmi_teardown(struct irq_data *d)
>  	gic_irq_set_prio(d, GICD_INT_DEF_PRI);
>  }
>  
> +static bool gic_arm64_erratum_2941627_needed(struct irq_data *d)
> +{
> +	if (!static_branch_unlikely(&gic_arm64_2941627_erratum))
> +		return false;
> +
> +	/*
> +	 * The workaround is needed if the IRQ is an SPI and
> +	 * the target cpu is different from the one we are
> +	 * executing on.
> +	 */
> +	return !((gic_irq_in_rdist(d)) || gic_irq(d) >= 8192 ||
> +		  cpumask_equal(irq_data_get_effective_affinity_mask(d),
> +				cpumask_of(smp_processor_id())));

I dislike this statement for multiple reasons:

- it is written as a negation, making it harder than strictly
  necessary to parse as it is the opposite of the comment above

- gic_irq_in_rdist() and gic_irq(d) >= 8192 are two ways of checking
  the interrupt range -- maybe we should just do that

- cpumask_equal() is *slow* if you have more that 64 CPUs, something
  that is increasingly common -- a better option would be to check
  whether the current CPU is in the mask or not, which would be enough
  as we only have a single affinity bit set

- smp_processor_id() can check for preemption, which is pointless
  here, as we're doing things under the irq_desc raw spinlock.

I would expect something like:

	enum gic_intid_range range = get_intid_range(d);

	return (range == SGI_RANGE || range == ESPI_RANGE) &&
	       !cpumask_test_cpu(raw_smp_processor_id(),
				 irq_data_get_effective_affinity_mask(d));

> +}
> +
>  static void gic_eoi_irq(struct irq_data *d)
>  {
>  	write_gicreg(gic_irq(d), ICC_EOIR1_EL1);
>  	isb();
> +
> +	if (gic_arm64_erratum_2941627_needed(d)) {
> +		/*
> +		 * Make sure the GIC stream deactivate packet
> +		 * issued by ICC_EOIR1_EL1 has completed before
> +		 * deactivating through GICD_IACTIVER.
> +		 */
> +		dsb(sy);
> +		gic_poke_irq(d, GICD_ICACTIVER);
> +	}
>  }
>  
>  static void gic_eoimode1_eoi_irq(struct irq_data *d)
> @@ -605,7 +632,11 @@ static void gic_eoimode1_eoi_irq(struct irq_data *d)
>  	 */
>  	if (gic_irq(d) >= 8192 || irqd_is_forwarded_to_vcpu(d))
>  		return;
> -	gic_write_dir(gic_irq(d));
> +
> +	if (!gic_arm64_erratum_2941627_needed(d))
> +		gic_write_dir(gic_irq(d));
> +	else
> +		gic_poke_irq(d, GICD_ICACTIVER);
>  }
>  
>  static int gic_set_type(struct irq_data *d, unsigned int type)
> @@ -1796,6 +1827,25 @@ static bool gic_enable_quirk_nvidia_t241(void *data)
>  	return true;
>  }
>  
> +static bool gic_enable_quirk_arm64_2941627(void *data)
> +{
> +	/*
> +	 * If CPUidle is not enabled the erratum runtime
> +	 * conditions can't be hit, since that requires:
> +	 *
> +	 * - A core entering a deep power state with
> +	 *   the associated GIC redistributor asleep
> +	 *   and an IRQ active and pending targeted at it
> +	 * - A different core handling the IRQ and
> +	 *   related GIC operations at the same time
> +	 */
> +	if (!IS_ENABLED(CONFIG_CPU_IDLE))
> +		return false;

Could this still hit on a system that traps WFI to EL3 and uses this
as a way to enter a low-power mode?

Thanks,

	M.

-- 
Without deviation from the norm, progress is not possible.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2023-07-04 14:45 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-04 12:34 [PATCH] irqchip/gic-v3: Workaround for GIC-700 erratum 2941627 Lorenzo Pieralisi
2023-07-04 14:44 ` Marc Zyngier [this message]
2023-07-04 15:14   ` Lorenzo Pieralisi
2023-07-04 15:23     ` Marc Zyngier
2023-07-04 15:27   ` Lorenzo Pieralisi
2023-07-04 15:31     ` Marc Zyngier
2023-07-04 15:50 ` [PATCH v2] " Lorenzo Pieralisi
     [not found] <ed3c5fe3f7ed42d58d98e77b3513d6eabf2ad6cd.camel@mediatek.com>
2023-07-09  8:20 ` [PATCH] " Marc Zyngier
2023-07-10  6:00   ` Chunhui Li (李春辉)
2023-07-11  2:03     ` Chunhui Li (李春辉)
     [not found] <17c629f00dee2bbcd09b99a6ed1bd2a411322084.camel@mediatek.com>
2023-07-12  7:21 ` Marc Zyngier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=86ttujwxb1.wl-maz@kernel.org \
    --to=maz@kernel.org \
    --cc=Cheng-Yuh.Wu@mediatek.com \
    --cc=hanks.chen@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lpieralisi@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).