From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@bootlin.com (Gregory CLEMENT) Date: Wed, 27 Jun 2018 08:10:24 +0200 Subject: [PATCH] arm64: dts: marvell: mcbin: fix eth3 connector name In-Reply-To: (Baruch Siach's message of "Sun, 24 Jun 2018 08:28:17 +0300") References: Message-ID: <871scsahf3.fsf@bootlin.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Baruch, On dim., juin 24 2018, Baruch Siach wrote: > The right most SFP connector on the Macchiatobin board and schematics is > marked as CON13/CON14. > > Signed-off-by: Baruch Siach Applied on mvebu/dt64 Thanks, Gregory > --- > arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts > index a66958ff4de6..56fa44860909 100644 > --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts > +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts > @@ -91,7 +91,7 @@ > }; > > sfp_eth3: sfp-eth3 { > - /* CON3,4 - CPS lane 5 */ > + /* CON13,14 - CPS lane 5 */ > compatible = "sff,sfp"; > i2c-bus = <&sfp_1g_i2c>; > los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>; > -- > 2.17.1 > -- Gregory Clement, Bootlin (formerly Free Electrons) Embedded Linux and Kernel engineering http://bootlin.com