[PATCH] OMAP2/3: PM: remove unnecessary wakeup/sleep dependency clear

[khilman@ti.com (Kevin Hilman)]

Hi Paul,

Kevin Hilman <khilman@ti.com> writes:

> Paul Walmsley <paul@pwsan.com> writes:
>
>> The OMAP2 and OMAP3 PM code clears clockdomain wakeup and sleep
>> dependencies.  This is unnecessary after commit
>> 6f7f63cc9adf3192e6fcac4e8bed5cc10fd924aa ("OMAP clockdomain:
>> initialize clockdomain registers when the clockdomain layer starts")
>> which clears these dependencies during clockdomain init.
>>
>> Signed-off-by: Paul Walmsley <paul@pwsan.com>
>> Cc: Kevin Hilman <khilman@deeprootsystems.com>
>> ---
>> Full-chip retention idle entry tested on OMAP35xx Beagleboard.
>
> Also tested on 3630/Zoom3.
>
> Queueing for 2.6.39.  Thanks,
>

While testing, I found out this patch breaks suspend/resume and idle on
at least 34xx.

A first suspend/resume works fine, but on subsequent ones SGX
powerdomain does not hit retention (and thus CORE powerdomain does not
either....

More below...

>
>>  arch/arm/mach-omap2/pm24xx.c |    8 +-------
>>  arch/arm/mach-omap2/pm34xx.c |   15 ---------------
>>  2 files changed, 1 insertions(+), 22 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
>> index 97feb3a..10f8747 100644
>> --- a/arch/arm/mach-omap2/pm24xx.c
>> +++ b/arch/arm/mach-omap2/pm24xx.c
>> @@ -363,9 +363,6 @@ static const struct platform_suspend_ops __initdata omap_pm_ops;
>>  /* XXX This function should be shareable between OMAP2xxx and OMAP3 */
>>  static int __init clkdms_setup(struct clockdomain *clkdm, void *unused)
>>  {
>> -	clkdm_clear_all_wkdeps(clkdm);
>> -	clkdm_clear_all_sleepdeps(clkdm);
>> -
>>  	if (clkdm->flags & CLKDM_CAN_ENABLE_AUTO)
>>  		omap2_clkdm_allow_idle(clkdm);
>>  	else if (clkdm->flags & CLKDM_CAN_FORCE_SLEEP &&
>> @@ -411,10 +408,7 @@ static void __init prcm_setup_regs(void)
>>  	pwrdm_set_next_pwrst(pwrdm, PWRDM_POWER_OFF);
>>  	omap2_clkdm_sleep(gfx_clkdm);
>>  
>> -	/*
>> -	 * Clear clockdomain wakeup dependencies and enable
>> -	 * hardware-supervised idle for all clkdms
>> -	 */
>> +	/* Enable hardware-supervised idle for all clkdms */
>>  	clkdm_for_each(clkdms_setup, NULL);
>>  	clkdm_add_wkdep(mpu_clkdm, wkup_clkdm);
>>  
>> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
>> index a4aa192..0eb9738 100644
>> --- a/arch/arm/mach-omap2/pm34xx.c
>> +++ b/arch/arm/mach-omap2/pm34xx.c
>> @@ -694,21 +694,6 @@ static void __init prcm_setup_regs(void)
>>  	u32 omap3630_grpsel_uart4_mask = cpu_is_omap3630() ?
>>  					OMAP3630_GRPSEL_UART4_MASK : 0;
>>  
>> -
>> -	/* XXX Reset all wkdeps. This should be done when initializing
>> -	 * powerdomains */
>> -	omap2_prm_write_mod_reg(0, OMAP3430_IVA2_MOD, PM_WKDEP);
>> -	omap2_prm_write_mod_reg(0, MPU_MOD, PM_WKDEP);
>> -	omap2_prm_write_mod_reg(0, OMAP3430_DSS_MOD, PM_WKDEP);
>> -	omap2_prm_write_mod_reg(0, OMAP3430_NEON_MOD, PM_WKDEP);
>> -	omap2_prm_write_mod_reg(0, OMAP3430_CAM_MOD, PM_WKDEP);
>> -	omap2_prm_write_mod_reg(0, OMAP3430_PER_MOD, PM_WKDEP);
>> -	if (omap_rev() > OMAP3430_REV_ES1_0) {
>> -		omap2_prm_write_mod_reg(0, OMAP3430ES2_SGX_MOD, PM_WKDEP);
>> -		omap2_prm_write_mod_reg(0, OMAP3430ES2_USBHOST_MOD, PM_WKDEP);
>> -	} else
>> -		omap2_prm_write_mod_reg(0, GFX_MOD, PM_WKDEP);


Simply adding back the above 5 lines (the SGX ones) gets things working
again, which suggests something isn't quite right with SGX, but I
haven't found the exact reason yet.

Kevin


>>  	/*
>>  	 * Enable interface clock autoidle for all modules.
>>  	 * Note that in the long run this should be done by clockfw