Re: [PATCH 2/2] dt-bindings: memory-controllers: Add mediatek common-dramc dt-bindings

["Crystal Guo (郭晶)" <Crystal.Guo@mediatek.com>]

On Thu, 2024-12-12 at 11:58 +0100, Krzysztof Kozlowski wrote:
> > 

> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> 
> 
> On 12/12/2024 09:59, Crystal Guo wrote:
> > Add devicetree binding for mediatek common-dramc driver.
> > 
> > The DRAM controller of MediaTek SoC provides an interface to
> > get the current data rate of DRAM.
> 
> 
> 
> 
> 
> A nit, subject: drop second/last, redundant "dt-bindings". The
> "dt-bindings" prefix is already stating that these are bindings.
> See also:
> 
https://urldefense.com/v3/__https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst*L18__;Iw!!CTRNKA9wMg0ARbw!mztYfN3n6_IAx78S44PFOetQS51-h6obm2HHrjEVRI-HJYyzJ2VWbbik2rn3pybssUBOT4gp5DM7MWDx$
> 

Okay, remove the redundant "dt-bindings", change the subject to "dt-
bindings: memory-controllers: Add MediaTek DRAM controller interface"


> > Signed-off-by: Crystal Guo <crystal.guo@mediatek.com>
> > ---
> >  .../mediatek,common-dramc.yaml                | 129
> > ++++++++++++++++++
> >  1 file changed, 129 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/memory-
> > controllers/mediatek,common-dramc.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,common-dramc.yaml
> > b/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,common-dramc.yaml
> > new file mode 100644
> > index 000000000000..c9e608c7f183
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/memory-
> > controllers/mediatek,common-dramc.yaml
> > @@ -0,0 +1,129 @@
> > +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> > +# Copyright (c) 2024 MediaTek Inc.
> > +%YAML 1.2
> > +---
> > +$id: 
> > https://urldefense.com/v3/__http://devicetree.org/schemas/memory-controllers/mediatek,common-dramc.yaml*__;Iw!!CTRNKA9wMg0ARbw!mztYfN3n6_IAx78S44PFOetQS51-h6obm2HHrjEVRI-HJYyzJ2VWbbik2rn3pybssUBOT4gp5GD5-Mgk$
> > +$schema: 
> > https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!CTRNKA9wMg0ARbw!mztYfN3n6_IAx78S44PFOetQS51-h6obm2HHrjEVRI-HJYyzJ2VWbbik2rn3pybssUBOT4gp5AGE5Eci$
> > +
> > +title: MediaTek Common DRAMC (DRAM Controller)
> 
> Common? Is this a real thing? Please describe the hardware.
> 

Sorry, my original description was not accurate. It has been changed
to:

Title: MediaTek DRAM Controller (DRAMC)

> > +
> > +maintainers:
> > +  - Crystal Guo <crystal.guo@mediatek.com>
> > +
> > +description: |
> 
> Do not need '|' unless you need to preserve formatting.
> 

Okay, remove it in v2.

> > +  The DRAM controller of MediaTek SoC provides an interface to
> > +  get the current data rate of DRAM.
> 
> So not common here?

Sorry, my original title description was not accurate.

> 
> > +
> > +properties:
> > +  compatible:
> > +    const: mediatek,common-dramc
> 
> This has to be SoC.
> 

Change to "mediatek,mt8196-dramc"

> > +
> > +  reg:
> > +    minItems: 9
> 
> Why this is flexible?
> 
The original implementation was incorrect and has been corrected in v2
to:

  reg:
    items:
      - description: anaphy registers
      - description: ddrphy registers

> > +    items:
> > +      - description: DRAMC_AO_CHA_BASE
> > +      - description: DRAMC_AO_CHB_BASE
> > +      - description: DRAMC_AO_CHC_BASE
> > +      - description: DRAMC_AO_CHD_BASE
> > +      - description: DRAMC_NAO_CHA_BASE
> > +      - description: DRAMC_NAO_CHB_BASE
> > +      - description: DRAMC_NAO_CHC_BASE
> > +      - description: DRAMC_NAO_CHD_BASE
> > +      - description: DDRPHY_AO_CHA_BASE
> > +      - description: DDRPHY_AO_CHB_BASE
> > +      - description: DDRPHY_AO_CHC_BASE
> > +      - description: DDRPHY_AO_CHD_BASE
> > +      - description: DDRPHY_NAO_CHA_BASE
> > +      - description: DDRPHY_NAO_CHB_BASE
> > +      - description: DDRPHY_NAO_CHC_BASE
> > +      - description: DDRPHY_NAO_CHD_BASE
> > +      - description: SLEEP_BASE
> 
> Don't use some defines. Look at other bindings how they describe
> items.
> 

This part has been updated in v2 to:

  reg:
    items:
      - description: anaphy registers
      - description: ddrphy registers

> > +
> > +  support-ch-cnt:
> 
> Nope

Okay, remove this property.

> 
> > +    maxItems: 1
> > +
> > +  fmeter-version:
> > +    maxItems: 1
> > +    description:
> > +      Fmeter version for calculating dram data rate
> > +
> > +  crystal-freq:
> > +    maxItems: 1
> > +    description:
> > +      Reference clock rate in MHz
> > +
> > +  shu-of:
> > +    maxItems: 1
> > +
> > +  pll-id: true
> > +  shu-lv: true
> > +  sdmpcw: true
> > +  posdiv: true
> > +  fbksel: true
> > +  dqsopen: true
> > +  async-ca: true
> > +  dq-ser-mode: true
> 
> 
> This binding is terrible. Was not tested and does not follow any
> guidelines. Please read example schema and writing bindings document.
> You can also read slides from my talks...
> 
> 
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - support-ch-cnt
> > +  - fmeter-version
> > +  - crystal-freq
> > +  - pll-id
> > +  - shu-lv
> > +  - shu-of
> > +  - sdmpcw
> > +  - posdiv
> > +  - fbksel
> > +  - dqsopen
> > +  - async-ca
> > +  - dq-ser-mode
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    soc {
> > +        #address-cells = <2>;
> > +        #size-cells = <2>;
> > +
> > +        dramc: dramc@10230000 {
> 
> memory-controller@
> and drop unused label.

Okay, thanks.
> 
> Best regards,
> Krzysztof