From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] arm64: dts: marvell: mcbin: add sdhci
Date: Tue, 23 May 2017 16:20:55 +0200 [thread overview]
Message-ID: <874lwby7qw.fsf@free-electrons.com> (raw)
In-Reply-To: <E1dAcn4-0004z2-Fl@rmk-PC.armlinux.org.uk> (Russell King's message of "Tue, 16 May 2017 14:45:30 +0100")
Hi Russell,
On mar., mai 16 2017, Russell King <rmk+kernel@armlinux.org.uk> wrote:
> Add sdhci support for MACCHIATOBin boards. This uses the AP806 SDHCI
> for eMMC and CP110 master for the SD card slot.
Applied on mvebu/dt64
Thanks,
Gregory
>
> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
> ---
>
> This version labels up the uSD connector, adds the vqmmc regulator for
> the uSD (the regulator itself already present in the DT), and supports
> the card detect signal.
>
> For eMMC, this version adds the vqmmc regulator, which again is already
> present in the DT, marks it as not supporting SD or SDIO, and also
> includes "slow mode" since testing with previous versions of the driver
> have shown that selecting faster speeds results in errors.
>
> arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts | 23 ++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> index cc167e05941a..60111ed3234a 100644
> --- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
> @@ -95,6 +95,21 @@
> status = "okay";
> };
>
> +&ap_sdhci0 {
> + bus-width = <8>;
> + /*
> + * Not stable in HS modes - phy needs "more calibration", so add
> + * the "slow-mode" and disable SDR104, SDR50 and DDR50 modes.
> + */
> + marvell,xenon-phy-slow-mode;
> + no-1-8-v;
> + no-sd;
> + no-sdio;
> + non-removable;
> + status = "okay";
> + vqmmc-supply = <&v_vddo_h>;
> +};
> +
> &cpm_i2c0 {
> clock-frequency = <100000>;
> status = "okay";
> @@ -105,6 +120,14 @@
> status = "okay";
> };
>
> +&cpm_sdhci0 {
> + /* U6 */
> + broken-cd;
> + bus-width = <4>;
> + status = "okay";
> + vqmmc-supply = <&v_3_3>;
> +};
> +
> &cpm_usb3_0 {
> /* J38? - USB2.0 only */
> status = "okay";
> --
> 2.7.4
>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
prev parent reply other threads:[~2017-05-23 14:20 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-16 13:45 [PATCH] arm64: dts: marvell: mcbin: add sdhci Russell King
[not found] ` <CAPv3WKf4GcOc7g-2yMCjGN4HrftDL0Ro6jHErQL8-zSH-tC10w@mail.gmail.com>
2017-05-16 15:42 ` Marcin Wojtas
2017-05-16 17:11 ` Russell King - ARM Linux
2017-05-23 14:20 ` Gregory CLEMENT
2017-05-23 14:20 ` Gregory CLEMENT [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=874lwby7qw.fsf@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox