linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [GIT PULL] ARM: mvebu: dt64 for v4.15 (#1)
@ 2017-10-20 15:08 Gregory CLEMENT
  2017-10-30 13:33 ` Arnd Bergmann
  0 siblings, 1 reply; 4+ messages in thread
From: Gregory CLEMENT @ 2017-10-20 15:08 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,

Here is the first pull request for dt64 for mvebu for v4.15.

Gregory

The following changes since commit 2bd6bf03f4c1c59381d62c61d03f6cc3fe71f66e:

  Linux 4.14-rc1 (2017-09-16 15:47:51 -0700)

are available in the git repository at:

  git://git.infradead.org/linux-mvebu.git tags/mvebu-dt64-4.15-1

for you to fetch changes up to c4e3bf290c3089502ee33e25795075b86fe9a449:

  arm64: dts: marvell: 7040-db: Add the carrier detect pin for SD card on CP (2017-10-12 15:53:47 +0200)

----------------------------------------------------------------
mvebu dt64 for 4.15 (part 1)

On Armada 7K/8k:
- Improve network support at SoC and board level
- Enable watchdog
- Add UART muxing
- On 7040 DB: add CD SDIO and NAND support
- On 8040 DB: add PCIE more ports and SPI1

On Armada 37xx:
 - Fix UART register size
 - Add vmmc regulator for SD on 3720 DB

----------------------------------------------------------------
Antoine Tenart (8):
      arm64: dts: marvell: extend the cp110 syscon register area length
      arm64: dts: marvell: add comphy nodes on cp110 master and slave
      arm64: dts: marvell: cp110: add PPv2 port interrupts
      arm64: dts: marvell: 37xx: remove empty line
      arm64: dts: marvell: mcbin: add comphy references to Ethernet ports
      arm64: dts: marvell: 7040-db: add comphy reference to Ethernet port
      arm64: dts: marvell: 7040-db: enable the SFP port
      arm64: dts: marvell: 8040-db: enable the SFP ports

Baruch Siach (1):
      arm64: dts: marvell: enable AP806 watchdog

Christine Gharzuzi (1):
      arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1

Gregory CLEMENT (4):
      arm64: dts: marvell: armada-3720-db: Add vmmc regulator for SD slot
      arm64: dts: marvell: add NAND support on the 7040-DB board
      arm64: dts: marvell: 7040-db: Document the gpio expander
      arm64: dts: marvell: 7040-db: Add the carrier detect pin for SD card on CP

Thomas Petazzoni (2):
      arm64: dts: marvell: add UART muxing on Armada 7K/8K
      arm64: dts: marvell: enable additional PCIe ports on Armada 8040 DB

allen yan (1):
      arm64: dts: marvell: Fix A37xx UART0 register size

 .../devicetree/bindings/serial/mvebu-uart.txt      |  2 +-
 arch/arm64/boot/dts/marvell/armada-3720-db.dts     | 11 ++++
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi       |  3 +-
 arch/arm64/boot/dts/marvell/armada-7040-db.dts     | 55 +++++++++++++++++++-
 arch/arm64/boot/dts/marvell/armada-70x0.dtsi       | 14 +++++
 arch/arm64/boot/dts/marvell/armada-8040-db.dts     | 57 +++++++++++++++++++++
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts  | 11 ++++
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi      | 11 ++++
 .../boot/dts/marvell/armada-cp110-master.dtsi      | 59 +++++++++++++++++++---
 .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 58 ++++++++++++++++++---
 10 files changed, 261 insertions(+), 20 deletions(-)

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [GIT PULL] ARM: mvebu: dt64 for v4.15 (#1)
@ 2017-10-20 15:32 Gregory CLEMENT
  2017-10-20 16:00 ` Gregory CLEMENT
  0 siblings, 1 reply; 4+ messages in thread
From: Gregory CLEMENT @ 2017-10-20 15:32 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,

Here is the first pull request for dt64 for mvebu for v4.15.

Gregory

The following changes since commit 2bd6bf03f4c1c59381d62c61d03f6cc3fe71f66e:

  Linux 4.14-rc1 (2017-09-16 15:47:51 -0700)

are available in the git repository at:

  git://git.infradead.org/linux-mvebu.git tags/mvebu-dt64-4.15-1

for you to fetch changes up to c4e3bf290c3089502ee33e25795075b86fe9a449:

  arm64: dts: marvell: 7040-db: Add the carrier detect pin for SD card on CP (2017-10-12 15:53:47 +0200)

----------------------------------------------------------------
mvebu dt64 for 4.15 (part 1)

On Armada 7K/8k:
- Improve network support at SoC and board level
- Enable watchdog
- Add UART muxing
- On 7040 DB: add CD SDIO and NAND support
- On 8040 DB: add PCIE more ports and SPI1

On Armada 37xx:
 - Fix UART register size
 - Add vmmc regulator for SD on 3720 DB

----------------------------------------------------------------
Antoine Tenart (8):
      arm64: dts: marvell: extend the cp110 syscon register area length
      arm64: dts: marvell: add comphy nodes on cp110 master and slave
      arm64: dts: marvell: cp110: add PPv2 port interrupts
      arm64: dts: marvell: 37xx: remove empty line
      arm64: dts: marvell: mcbin: add comphy references to Ethernet ports
      arm64: dts: marvell: 7040-db: add comphy reference to Ethernet port
      arm64: dts: marvell: 7040-db: enable the SFP port
      arm64: dts: marvell: 8040-db: enable the SFP ports

Baruch Siach (1):
      arm64: dts: marvell: enable AP806 watchdog

Christine Gharzuzi (1):
      arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1

Gregory CLEMENT (4):
      arm64: dts: marvell: armada-3720-db: Add vmmc regulator for SD slot
      arm64: dts: marvell: add NAND support on the 7040-DB board
      arm64: dts: marvell: 7040-db: Document the gpio expander
      arm64: dts: marvell: 7040-db: Add the carrier detect pin for SD card on CP

Thomas Petazzoni (2):
      arm64: dts: marvell: add UART muxing on Armada 7K/8K
      arm64: dts: marvell: enable additional PCIe ports on Armada 8040 DB

allen yan (1):
      arm64: dts: marvell: Fix A37xx UART0 register size

 .../devicetree/bindings/serial/mvebu-uart.txt      |  2 +-
 arch/arm64/boot/dts/marvell/armada-3720-db.dts     | 11 ++++
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi       |  3 +-
 arch/arm64/boot/dts/marvell/armada-7040-db.dts     | 55 +++++++++++++++++++-
 arch/arm64/boot/dts/marvell/armada-70x0.dtsi       | 14 +++++
 arch/arm64/boot/dts/marvell/armada-8040-db.dts     | 57 +++++++++++++++++++++
 arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts  | 11 ++++
 arch/arm64/boot/dts/marvell/armada-ap806.dtsi      | 11 ++++
 .../boot/dts/marvell/armada-cp110-master.dtsi      | 59 +++++++++++++++++++---
 .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 58 ++++++++++++++++++---
 10 files changed, 261 insertions(+), 20 deletions(-)

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [GIT PULL] ARM: mvebu: dt64 for v4.15 (#1)
  2017-10-20 15:32 [GIT PULL] ARM: mvebu: dt64 for v4.15 (#1) Gregory CLEMENT
@ 2017-10-20 16:00 ` Gregory CLEMENT
  0 siblings, 0 replies; 4+ messages in thread
From: Gregory CLEMENT @ 2017-10-20 16:00 UTC (permalink / raw)
  To: linux-arm-kernel

Hi,


This email was sent in double because I though I had an issue with the
first send. Indeed an other email sent 15 min later to the same mailing
list showed up on the mailing list whereas this one was not there after
half an hour.

I don't understand what happened. Sorry for the noise,

Gregory


 
 On ven., oct. 20 2017, Gregory CLEMENT <gregory.clement@free-electrons.com> wrote:

> Hi,
>
> Here is the first pull request for dt64 for mvebu for v4.15.
>
> Gregory
>
> The following changes since commit 2bd6bf03f4c1c59381d62c61d03f6cc3fe71f66e:
>
>   Linux 4.14-rc1 (2017-09-16 15:47:51 -0700)
>
> are available in the git repository at:
>
>   git://git.infradead.org/linux-mvebu.git tags/mvebu-dt64-4.15-1
>
> for you to fetch changes up to c4e3bf290c3089502ee33e25795075b86fe9a449:
>
>   arm64: dts: marvell: 7040-db: Add the carrier detect pin for SD card on CP (2017-10-12 15:53:47 +0200)
>
> ----------------------------------------------------------------
> mvebu dt64 for 4.15 (part 1)
>
> On Armada 7K/8k:
> - Improve network support at SoC and board level
> - Enable watchdog
> - Add UART muxing
> - On 7040 DB: add CD SDIO and NAND support
> - On 8040 DB: add PCIE more ports and SPI1
>
> On Armada 37xx:
>  - Fix UART register size
>  - Add vmmc regulator for SD on 3720 DB
>
> ----------------------------------------------------------------
> Antoine Tenart (8):
>       arm64: dts: marvell: extend the cp110 syscon register area length
>       arm64: dts: marvell: add comphy nodes on cp110 master and slave
>       arm64: dts: marvell: cp110: add PPv2 port interrupts
>       arm64: dts: marvell: 37xx: remove empty line
>       arm64: dts: marvell: mcbin: add comphy references to Ethernet ports
>       arm64: dts: marvell: 7040-db: add comphy reference to Ethernet port
>       arm64: dts: marvell: 7040-db: enable the SFP port
>       arm64: dts: marvell: 8040-db: enable the SFP ports
>
> Baruch Siach (1):
>       arm64: dts: marvell: enable AP806 watchdog
>
> Christine Gharzuzi (1):
>       arm64: dts: marvell: Enable Armada-8040-DB CPS SPI1
>
> Gregory CLEMENT (4):
>       arm64: dts: marvell: armada-3720-db: Add vmmc regulator for SD slot
>       arm64: dts: marvell: add NAND support on the 7040-DB board
>       arm64: dts: marvell: 7040-db: Document the gpio expander
>       arm64: dts: marvell: 7040-db: Add the carrier detect pin for SD card on CP
>
> Thomas Petazzoni (2):
>       arm64: dts: marvell: add UART muxing on Armada 7K/8K
>       arm64: dts: marvell: enable additional PCIe ports on Armada 8040 DB
>
> allen yan (1):
>       arm64: dts: marvell: Fix A37xx UART0 register size
>
>  .../devicetree/bindings/serial/mvebu-uart.txt      |  2 +-
>  arch/arm64/boot/dts/marvell/armada-3720-db.dts     | 11 ++++
>  arch/arm64/boot/dts/marvell/armada-37xx.dtsi       |  3 +-
>  arch/arm64/boot/dts/marvell/armada-7040-db.dts     | 55 +++++++++++++++++++-
>  arch/arm64/boot/dts/marvell/armada-70x0.dtsi       | 14 +++++
>  arch/arm64/boot/dts/marvell/armada-8040-db.dts     | 57 +++++++++++++++++++++
>  arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts  | 11 ++++
>  arch/arm64/boot/dts/marvell/armada-ap806.dtsi      | 11 ++++
>  .../boot/dts/marvell/armada-cp110-master.dtsi      | 59 +++++++++++++++++++---
>  .../arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 58 ++++++++++++++++++---
>  10 files changed, 261 insertions(+), 20 deletions(-)

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com

^ permalink raw reply	[flat|nested] 4+ messages in thread

* [GIT PULL] ARM: mvebu: dt64 for v4.15 (#1)
  2017-10-20 15:08 Gregory CLEMENT
@ 2017-10-30 13:33 ` Arnd Bergmann
  0 siblings, 0 replies; 4+ messages in thread
From: Arnd Bergmann @ 2017-10-30 13:33 UTC (permalink / raw)
  To: linux-arm-kernel

On Fri, Oct 20, 2017 at 5:08 PM, Gregory CLEMENT
<gregory.clement@free-electrons.com> wrote:
> ----------------------------------------------------------------
> mvebu dt64 for 4.15 (part 1)
>
> On Armada 7K/8k:
> - Improve network support at SoC and board level
> - Enable watchdog
> - Add UART muxing
> - On 7040 DB: add CD SDIO and NAND support
> - On 8040 DB: add PCIE more ports and SPI1
>
> On Armada 37xx:
>  - Fix UART register size
>  - Add vmmc regulator for SD on 3720 DB

Pulled into next/dt, thanks!

     Arnd

^ permalink raw reply	[flat|nested] 4+ messages in thread

end of thread, other threads:[~2017-10-30 13:33 UTC | newest]

Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2017-10-20 15:32 [GIT PULL] ARM: mvebu: dt64 for v4.15 (#1) Gregory CLEMENT
2017-10-20 16:00 ` Gregory CLEMENT
  -- strict thread matches above, loose matches on Subject: below --
2017-10-20 15:08 Gregory CLEMENT
2017-10-30 13:33 ` Arnd Bergmann

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).