From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Wed, 30 Mar 2016 12:03:09 +0200 Subject: [PATCH v2] ARM: mvebu: Correct unit address for linksys In-Reply-To: (Imre Kaloz's message of "Wed, 30 Mar 2016 11:05:37 +0200") References: <1459270660-30411-1-git-send-email-patrick@puiterwijk.org> Message-ID: <877fgkuvtu.fsf@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Patrick, On mer., mars 30 2016, "Imre Kaloz" wrote: > Right, a165c3b63b6f24fdc47c270db5f8b1a48b69c1b6 was merged sooner then > this board setup file. > > Acked-by: Imre Kaloz Applied on mvebu/fixes. I also added the following flags to the commit: Cc: Fixes: 2d0a7addbd10 ("ARM: Kirkwood: Add support for many Synology NAS devices") as well as the acked-by from Imre. Thanks, Gregory > > On Tue, 29 Mar 2016 18:57:40 +0200, Patrick Uiterwijk > wrote: > >> The USB2 port for Armada 38x is defined to be at 58000, not at >> 50000. >> >> Signed-off-by: Patrick Uiterwijk >> --- >> arch/arm/boot/dts/armada-385-linksys.dtsi | 2 +- >> 1 file changed, 1 insertion(+), 1 deletion(-) >> >> diff --git a/arch/arm/boot/dts/armada-385-linksys.dtsi >> b/arch/arm/boot/dts/armada-385-linksys.dtsi >> index 3710755..85d2c37 100644 >> --- a/arch/arm/boot/dts/armada-385-linksys.dtsi >> +++ b/arch/arm/boot/dts/armada-385-linksys.dtsi >> @@ -117,7 +117,7 @@ >> }; >> /* USB part of the eSATA/USB 2.0 port */ >> - usb at 50000 { >> + usb at 58000 { >> status = "okay"; >> }; -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com