From: robert.jarzmik@free.fr (Robert Jarzmik)
To: linux-arm-kernel@lists.infradead.org
Subject: [GIT PULL] pxa for v4.4
Date: Fri, 16 Oct 2015 21:00:40 +0200 [thread overview]
Message-ID: <878u72zlif.fsf@belgarion.home> (raw)
Hi Arnd, Kevin and Olof,
This is the pxa pull request for 4.4 cycle. It is mainly magician enhancement
and fixes. Could you please consider pulling ?
The following changes since commit 6ff33f3902c3b1c5d0db6b1e2c70b6d76fba357f:
Linux 4.3-rc1 (2015-09-12 16:35:56 -0700)
are available in the git repository at:
https://github.com/rjarzmik/linux.git pxa-for-4.4
for you to fetch changes up to 54c09889bff6d99c8733eed4a26c9391b177c88b:
ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode (2015-10-16 20:52:39 +0200)
----------------------------------------------------------------
This is the pxa changes for v4.4 cycle.
This cycle is bigger than usual :
- magician was greatly enhanced (new IPs discovered, ...)
- almost all legacy board files have been updated to the
new PWM API (mostly for backlight control)
- some minor fixes in raumfeld, z2 and mioa701
----------------------------------------------------------------
Arnd Bergmann (1):
ARM: pxa: remove incorrect __init annotation on pxa27x_set_pwrmode
Jarkko Nikula (1):
ARM: pxa: Remove unused clock_enable field from struct pxa2xx_spi_master
Petr Cvek (22):
ARM: pxa: magician: Fix indentation in machine files
ARM: pxa: magician: Print more specific error message for global GPIOs
ARM: pxa: magician: Optimize debug messages for LCD power
ARM: pxa: magician: Change description of LCD power GPIO
ARM: pxa: magician: Add new discovered EGPIO pins
ARM: pxa: magician: Rename abstract LCD GPIOs
ARM: pxa: magician: Optimize powerup delays for Samsung LCD
ARM: pxa: magician: Rename charger cable detection EGPIOs
ARM: pxa: magician: Optimize Samsung LCD refresh to 50Hz
ARM: pxa: magician: Fix and add charging detection functions
ARM: pxa: magician: Fix platform data for both PXA27x I2C controllers
ARM: pxa: magician: Fix redundant GPIO request for pxaficp_ir
ARM: pxa: magician: Fix support for Intel Strata NOR Flash
ARM: pxa: magician: Fix wrongly enabled USB host ports
ARM: pxa: magician: Remove definition of the STUART port
ARM: pxa: magician: Add debug message for backlight brightness function
ARM: pxa: magician: Add missing regulator for PWM backlight
ARM: pxa: magician: Move platform_add_devices() to the end of magician_init()
ARM: pxa: magician: Change comments to be more informative
ARM: pxa: magician: Add support for MAX1587A Vcore regulator
ARM: pxa: magician: Add support for PXA27x UDC
ARM: pxa: magician: Remove pdata for pasic3-leds
Robert Jarzmik (2):
ARM: pxa: add resources to pxaficp_ir
ARM: pxa: mioa701: add wm9713 codec
Thierry Reding (17):
ARM: pxa: colibri-pxa270-income: Use PWM lookup table
ARM: pxa: ezx: Use PWM lookup table
ARM: pxa: hx4700: Remove unused field initializers
ARM: pxa: lpd270: Use PWM lookup table
ARM: pxa: magician: Use PWM lookup table
ARM: pxa: mainstone: Use PWM lookup table
ARM: pxa: mioa701: Use PWM lookup table
ARM: pxa: palm27x: Use PWM lookup table
ARM: pxa: palmte2: Use PWM lookup table
ARM: pxa: pcm990: Use PWM lookup table
ARM: pxa: raumfeld: Use PWM lookup table
ARM: pxa: viper: Use PWM lookup table
ARM: pxa: palmtc: Use PWM lookup table
ARM: pxa: cm-x300: Use PWM lookup table
ARM: pxa: tavorevb: Use PWM lookup table
ARM: pxa: z2: Use PWM lookup table
ARM: pxa: zylonite: Use PWM lookup table
Uwe Kleine-K?nig (1):
ARM: pxa: raumfeld: make some variables static
Documentation/spi/pxa2xx | 6 -
arch/arm/mach-pxa/cm-x300.c | 9 +-
arch/arm/mach-pxa/colibri-pxa270-income.c | 9 +-
arch/arm/mach-pxa/devices.c | 20 +
arch/arm/mach-pxa/ezx.c | 9 +-
arch/arm/mach-pxa/hx4700.c | 3 -
arch/arm/mach-pxa/icontrol.c | 2 -
arch/arm/mach-pxa/include/mach/magician.h | 70 +--
arch/arm/mach-pxa/include/mach/pxa27x.h | 2 +-
arch/arm/mach-pxa/lpd270.c | 9 +-
arch/arm/mach-pxa/magician.c | 680 ++++++++++++++++++------------
arch/arm/mach-pxa/mainstone.c | 19 +-
arch/arm/mach-pxa/mioa701.c | 11 +-
arch/arm/mach-pxa/palm27x.c | 9 +-
arch/arm/mach-pxa/palmtc.c | 9 +-
arch/arm/mach-pxa/palmte2.c | 9 +-
arch/arm/mach-pxa/pcm990-baseboard.c | 9 +-
arch/arm/mach-pxa/pxa27x.c | 2 +-
arch/arm/mach-pxa/raumfeld.c | 21 +-
arch/arm/mach-pxa/tavorevb.c | 13 +-
arch/arm/mach-pxa/viper.c | 9 +-
arch/arm/mach-pxa/z2.c | 15 +-
arch/arm/mach-pxa/zylonite.c | 9 +-
include/linux/spi/pxa2xx_spi.h | 1 -
24 files changed, 608 insertions(+), 347 deletions(-)
--
Robert
next reply other threads:[~2015-10-16 19:00 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-10-16 19:00 Robert Jarzmik [this message]
2015-10-23 17:15 ` [GIT PULL] pxa for v4.4 Olof Johansson
2015-10-24 10:17 ` Robert Jarzmik
2015-10-26 5:55 ` Olof Johansson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=878u72zlif.fsf@belgarion.home \
--to=robert.jarzmik@free.fr \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).