[PATCH 1/2] usb: gadget: pxa25x_udc: prepare/unprepare clocks in pxa-ssp

[PATCH 1/2] usb: gadget: pxa25x_udc: prepare/unprepare clocks in pxa-ssp

[Dmitry Eremin-Solenikov]

Change clk_enable/disable() calls to clk_prepare_enable() and
clk_disable_unrepapre().

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
 drivers/usb/gadget/udc/pxa25x_udc.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/usb/gadget/udc/pxa25x_udc.c b/drivers/usb/gadget/udc/pxa25x_udc.c
index 42f7eeb..e4964ee 100644
--- a/drivers/usb/gadget/udc/pxa25x_udc.c
+++ b/drivers/usb/gadget/udc/pxa25x_udc.c
@@ -103,8 +103,8 @@ static const char ep0name [] = "ep0";
 
 /* IXP doesn't yet support <linux/clk.h> */
 #define clk_get(dev,name)	NULL
-#define clk_enable(clk)		do { } while (0)
-#define clk_disable(clk)	do { } while (0)
+#define clk_prepare_enable(clk)	do { } while (0)
+#define clk_disable_unprepare(clk)	do { } while (0)
 #define clk_put(clk)		do { } while (0)
 
 #endif
@@ -932,7 +932,7 @@ static int pullup(struct pxa25x_udc *udc)
 		if (!udc->active) {
 			udc->active = 1;
 			/* Enable clock for USB device */
-			clk_enable(udc->clk);
+			clk_prepare_enable(udc->clk);
 			udc_enable(udc);
 		}
 	} else {
@@ -945,7 +945,7 @@ static int pullup(struct pxa25x_udc *udc)
 			}
 			udc_disable(udc);
 			/* Disable clock for USB device */
-			clk_disable(udc->clk);
+			clk_disable_unprepare(udc->clk);
 			udc->active = 0;
 		}
 
-- 
2.1.1

[PATCH 2/2] usb: gadget: pxa27x_udc: prepare/unprepare clocks in pxa-ssp

[Dmitry Eremin-Solenikov]

Change clk_enable/disable() calls to clk_prepare_enable() and
clk_disable_unrepapre().

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
---
 drivers/usb/gadget/udc/pxa27x_udc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/usb/gadget/udc/pxa27x_udc.c b/drivers/usb/gadget/udc/pxa27x_udc.c
index 4868369..e03c61d 100644
--- a/drivers/usb/gadget/udc/pxa27x_udc.c
+++ b/drivers/usb/gadget/udc/pxa27x_udc.c
@@ -1701,7 +1701,7 @@ static void udc_disable(struct pxa_udc *udc)
 	udc_writel(udc, UDCICR1, 0);
 
 	udc_clear_mask_UDCCR(udc, UDCCR_UDE);
-	clk_disable(udc->clk);
+	clk_disable_unprepare(udc->clk);
 
 	ep0_idle(udc);
 	udc->gadget.speed = USB_SPEED_UNKNOWN;
@@ -1761,7 +1761,7 @@ static void udc_enable(struct pxa_udc *udc)
 	udc_writel(udc, UDCICR1, 0);
 	udc_clear_mask_UDCCR(udc, UDCCR_UDE);
 
-	clk_enable(udc->clk);
+	clk_prepare_enable(udc->clk);
 
 	ep0_idle(udc);
 	udc->gadget.speed = USB_SPEED_FULL;
-- 
2.1.1

[PATCH 2/2] usb: gadget: pxa27x_udc: prepare/unprepare clocks in pxa-ssp

[Robert Jarzmik]

Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> writes:

> Change clk_enable/disable() calls to clk_prepare_enable() and
> clk_disable_unrepapre().

No, there are already patches for this in Felipe's next tree :
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb.git testing/next

Cheers.

--
Robert

[PATCH 1/2] usb: gadget: pxa25x_udc: prepare/unprepare clocks in pxa-ssp

[Robert Jarzmik]

Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> writes:

> Change clk_enable/disable() calls to clk_prepare_enable() and
> clk_disable_unrepapre().
              => clk_disable_unprepare() (typo)

Otherwise, good for me, ack.

Cheers.

--
Robert