From mboxrd@z Thu Jan 1 00:00:00 1970 From: khilman@linaro.org (Kevin Hilman) Date: Thu, 23 Jan 2014 09:25:37 -0800 Subject: [PATCH 0/2] Enable clock controllers on MSM In-Reply-To: <1389921904-3777-1-git-send-email-sboyd@codeaurora.org> (Stephen Boyd's message of "Thu, 16 Jan 2014 17:25:02 -0800") References: <1389921904-3777-1-git-send-email-sboyd@codeaurora.org> Message-ID: <878uu6y5im.fsf@paris.lan> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Stephen Boyd writes: > These patches add the clock controller nodes, enable the clock drivers > on MSM based platforms, and hook it up enough to get the serial console > working. This is based on the merge of Mike's clk-next branch with > linux-next-20140116. The changes need the clk-next branch because that's > where the DTS include files landed. I forgot to repond to this earlier, but I tested this on top of -next and it gets the dragonboard booting w/mainline. Yay! > Perhaps this can be applied after 3.14-rc1 is out? Yeah, sounds good. Kevin > Stephen Boyd (2): > ARM: dts: msm: Add clock controller nodes and hook into uart > ARM: msm_defconfig: Enable MSM clock drivers > > arch/arm/boot/dts/qcom-msm8660-surf.dts | 11 +++++++++++ > arch/arm/boot/dts/qcom-msm8960-cdp.dts | 18 ++++++++++++++++++ > arch/arm/boot/dts/qcom-msm8974.dtsi | 24 ++++++++++++++++++++++++ > arch/arm/configs/msm_defconfig | 4 ++++ > 4 files changed, 57 insertions(+)