From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Mon, 12 Dec 2016 17:37:56 +0100 Subject: [PATCH v3 11/12] arm64: dts: marvell: add sdhci support for Armada 7K/8K In-Reply-To: <20161209200729.GO14217@n2100.armlinux.org.uk> (Russell King's message of "Fri, 9 Dec 2016 20:07:29 +0000") References: <923c97f32a828b579756bf86946689ed54a0a174.1481279228.git-series.gregory.clement@free-electrons.com> <20161209200729.GO14217@n2100.armlinux.org.uk> Message-ID: <87bmwhdrx7.fsf@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Russell King, On ven., d?c. 09 2016, Russell King - ARM Linux wrote: > On Fri, Dec 09, 2016 at 11:30:07AM +0100, Gregory CLEMENT wrote: >> Also enable it on the Armada 7040 DB board >> >> Signed-off-by: Gregory CLEMENT > > Hi, > > Can this also be added to the cp110 on the 7k/8k SoCs as well, or does > it rely on other unmerged support? I did not add this one because until now I had not the hardware setup available to test it. But at least I can add the ressources in the device tree and now I can test it partially. Gregory > > Thanks. > > -- > RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ > FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up > according to speedtest.net. -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com