From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Wed, 05 Oct 2016 17:35:51 +0200 Subject: [PATCH] arm64: dts: marvell: Add definition for the Globalscale Marvell ESPRESSOBin Board In-Reply-To: <20161005172837.5ea130a1@free-electrons.com> (Thomas Petazzoni's message of "Wed, 5 Oct 2016 17:28:37 +0200") References: <20161005142734.18995-1-romain.perier@free-electrons.com> <87fuoaygie.fsf@free-electrons.com> <20161005172837.5ea130a1@free-electrons.com> Message-ID: <87bmyyyfjc.fsf@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Thomas, On mer., oct. 05 2016, Thomas Petazzoni wrote: > Hello, > > On Wed, 05 Oct 2016 17:14:49 +0200, Gregory CLEMENT wrote: > >> > + memory { >> > + device_type = "memory"; >> >> >> According to the kickstarter page the boards will came with different >> amount of memory (from 512MB to 2GB). So we could put a comment >> here about tuning this value depending of the board. > > U-Boot does this tuning automatically, so there is no need for the user > to tune anything here. Great! It was not the case with the first Armada XP and 370 boards, but at this time we appended the dtb to the kernel and the U-Boot on these board was not dt capable. Thanks, Gregory -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com