* [PATCHv2] arm: mach-omap2: smartreflex: fix another memory leak
@ 2011-02-07 14:08 Aaro Koskinen
2011-02-07 15:04 ` Vishwanath Sripathy
2011-02-14 22:38 ` Kevin Hilman
0 siblings, 2 replies; 4+ messages in thread
From: Aaro Koskinen @ 2011-02-07 14:08 UTC (permalink / raw)
To: linux-arm-kernel
Temporary strings with volt_* file names should be released after the
debugfs entries are created. While at it, also simplify the string
allocation, and use just snprintf() to create the name.
The patch eliminates kmemleak reports with the following stack trace
(multiple objects depending on HW):
unreferenced object 0xcedbc5a0 (size 64):
comm "swapper", pid 1, jiffies 4294929375 (age 423.734s)
hex dump (first 32 bytes):
76 6f 6c 74 5f 39 37 35 30 30 30 00 00 00 00 00 volt_975000.....
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<c012fee0>] create_object+0x104/0x208
[<c012dbc8>] kmem_cache_alloc_trace+0xf0/0x17c
[<c0013f64>] omap_sr_probe+0x314/0x420
[<c02a1724>] platform_drv_probe+0x18/0x1c
[<c02a088c>] driver_probe_device+0xc8/0x188
[<c02a09b4>] __driver_attach+0x68/0x8c
[<c02a00ac>] bus_for_each_dev+0x44/0x74
[<c029f9e0>] bus_add_driver+0xa0/0x228
[<c02a0cac>] driver_register+0xa8/0x130
[<c02a1b2c>] platform_driver_probe+0x18/0x8c
[<c0013c1c>] sr_init+0x40/0x74
[<c005a554>] do_one_initcall+0xc8/0x1a0
[<c00084f4>] kernel_init+0x150/0x218
[<c0065d64>] kernel_thread_exit+0x0/0x8
[<ffffffff>] 0xffffffff
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
---
v2: Get rid of kmalloc().
arch/arm/mach-omap2/smartreflex.c | 15 +++------------
1 files changed, 3 insertions(+), 12 deletions(-)
diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
index 77ecebf..e54db84 100644
--- a/arch/arm/mach-omap2/smartreflex.c
+++ b/arch/arm/mach-omap2/smartreflex.c
@@ -927,19 +927,10 @@ static int __init omap_sr_probe(struct platform_device *pdev)
}
for (i = 0; i < sr_info->nvalue_count; i++) {
- char *name;
- char volt_name[32];
-
- name = kzalloc(NVALUE_NAME_LEN + 1, GFP_KERNEL);
- if (!name) {
- dev_err(&pdev->dev, "%s: Unable to allocate memory"
- " for n-value directory name\n", __func__);
- return -ENOMEM;
- }
+ char name[NVALUE_NAME_LEN + 1];
- strcpy(name, "volt_");
- sprintf(volt_name, "%d", volt_data[i].volt_nominal);
- strcat(name, volt_name);
+ snprintf(name, sizeof(name), "volt_%d",
+ volt_data[i].volt_nominal);
(void) debugfs_create_x32(name, S_IRUGO | S_IWUGO, nvalue_dir,
&(sr_info->nvalue_table[i].nvalue));
}
--
1.5.6.5
^ permalink raw reply related [flat|nested] 4+ messages in thread
* [PATCHv2] arm: mach-omap2: smartreflex: fix another memory leak
2011-02-07 14:08 [PATCHv2] arm: mach-omap2: smartreflex: fix another memory leak Aaro Koskinen
@ 2011-02-07 15:04 ` Vishwanath Sripathy
2011-02-07 15:14 ` Aaro Koskinen
2011-02-14 22:38 ` Kevin Hilman
1 sibling, 1 reply; 4+ messages in thread
From: Vishwanath Sripathy @ 2011-02-07 15:04 UTC (permalink / raw)
To: linux-arm-kernel
> -----Original Message-----
> From: Aaro Koskinen [mailto:aaro.koskinen at nokia.com]
> Sent: Monday, February 07, 2011 7:38 PM
> To: tony at atomide.com; linux-omap at vger.kernel.org; linux-arm-
> kernel at lists.infradead.org
> Cc: vishwanath.bs at ti.com; Aaro Koskinen
> Subject: [PATCHv2] arm: mach-omap2: smartreflex: fix another memory
> leak
>
> Temporary strings with volt_* file names should be released after the
> debugfs entries are created. While at it, also simplify the string
> allocation, and use just snprintf() to create the name.
>
> The patch eliminates kmemleak reports with the following stack trace
> (multiple objects depending on HW):
>
> unreferenced object 0xcedbc5a0 (size 64):
> comm "swapper", pid 1, jiffies 4294929375 (age 423.734s)
> hex dump (first 32 bytes):
> 76 6f 6c 74 5f 39 37 35 30 30 30 00 00 00 00 00 volt_975000.....
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> backtrace:
> [<c012fee0>] create_object+0x104/0x208
> [<c012dbc8>] kmem_cache_alloc_trace+0xf0/0x17c
> [<c0013f64>] omap_sr_probe+0x314/0x420
> [<c02a1724>] platform_drv_probe+0x18/0x1c
> [<c02a088c>] driver_probe_device+0xc8/0x188
> [<c02a09b4>] __driver_attach+0x68/0x8c
> [<c02a00ac>] bus_for_each_dev+0x44/0x74
> [<c029f9e0>] bus_add_driver+0xa0/0x228
> [<c02a0cac>] driver_register+0xa8/0x130
> [<c02a1b2c>] platform_driver_probe+0x18/0x8c
> [<c0013c1c>] sr_init+0x40/0x74
> [<c005a554>] do_one_initcall+0xc8/0x1a0
> [<c00084f4>] kernel_init+0x150/0x218
> [<c0065d64>] kernel_thread_exit+0x0/0x8
> [<ffffffff>] 0xffffffff
>
> Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
> ---
>
> v2: Get rid of kmalloc().
>
> arch/arm/mach-omap2/smartreflex.c | 15 +++------------
> 1 files changed, 3 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-
> omap2/smartreflex.c
> index 77ecebf..e54db84 100644
> --- a/arch/arm/mach-omap2/smartreflex.c
> +++ b/arch/arm/mach-omap2/smartreflex.c
> @@ -927,19 +927,10 @@ static int __init omap_sr_probe(struct
> platform_device *pdev)
> }
>
> for (i = 0; i < sr_info->nvalue_count; i++) {
> - char *name;
> - char volt_name[32];
> -
> - name = kzalloc(NVALUE_NAME_LEN + 1, GFP_KERNEL);
> - if (!name) {
> - dev_err(&pdev->dev, "%s: Unable to allocate
> memory"
> - " for n-value directory name\n",
__func__);
> - return -ENOMEM;
> - }
> + char name[NVALUE_NAME_LEN + 1];
Is there any need to keep this inside the loop? Defining it in the
beginning of function might save a few cpu cycles.
Vishwa
>
> - strcpy(name, "volt_");
> - sprintf(volt_name, "%d", volt_data[i].volt_nominal);
> - strcat(name, volt_name);
> + snprintf(name, sizeof(name), "volt_%d",
> + volt_data[i].volt_nominal);
> (void) debugfs_create_x32(name, S_IRUGO | S_IWUGO,
> nvalue_dir,
> &(sr_info->nvalue_table[i].nvalue));
> }
> --
> 1.5.6.5
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCHv2] arm: mach-omap2: smartreflex: fix another memory leak
2011-02-07 15:04 ` Vishwanath Sripathy
@ 2011-02-07 15:14 ` Aaro Koskinen
0 siblings, 0 replies; 4+ messages in thread
From: Aaro Koskinen @ 2011-02-07 15:14 UTC (permalink / raw)
To: linux-arm-kernel
Hi,
On Mon, 7 Feb 2011, Vishwanath Sripathy wrote:
>> Temporary strings with volt_* file names should be released after the
>> debugfs entries are created. While at it, also simplify the string
>> allocation, and use just snprintf() to create the name.
>>
>> The patch eliminates kmemleak reports with the following stack trace
>> (multiple objects depending on HW):
>>
>> unreferenced object 0xcedbc5a0 (size 64):
>> comm "swapper", pid 1, jiffies 4294929375 (age 423.734s)
>> hex dump (first 32 bytes):
>> 76 6f 6c 74 5f 39 37 35 30 30 30 00 00 00 00 00 volt_975000.....
>> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
>> backtrace:
>> [<c012fee0>] create_object+0x104/0x208
>> [<c012dbc8>] kmem_cache_alloc_trace+0xf0/0x17c
>> [<c0013f64>] omap_sr_probe+0x314/0x420
>> [<c02a1724>] platform_drv_probe+0x18/0x1c
>> [<c02a088c>] driver_probe_device+0xc8/0x188
>> [<c02a09b4>] __driver_attach+0x68/0x8c
>> [<c02a00ac>] bus_for_each_dev+0x44/0x74
>> [<c029f9e0>] bus_add_driver+0xa0/0x228
>> [<c02a0cac>] driver_register+0xa8/0x130
>> [<c02a1b2c>] platform_driver_probe+0x18/0x8c
>> [<c0013c1c>] sr_init+0x40/0x74
>> [<c005a554>] do_one_initcall+0xc8/0x1a0
>> [<c00084f4>] kernel_init+0x150/0x218
>> [<c0065d64>] kernel_thread_exit+0x0/0x8
>> [<ffffffff>] 0xffffffff
>>
>> Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
>> ---
>>
>> v2: Get rid of kmalloc().
>>
>> arch/arm/mach-omap2/smartreflex.c | 15 +++------------
>> 1 files changed, 3 insertions(+), 12 deletions(-)
>>
>> diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-
>> omap2/smartreflex.c
>> index 77ecebf..e54db84 100644
>> --- a/arch/arm/mach-omap2/smartreflex.c
>> +++ b/arch/arm/mach-omap2/smartreflex.c
>> @@ -927,19 +927,10 @@ static int __init omap_sr_probe(struct
>> platform_device *pdev)
>> }
>>
>> for (i = 0; i < sr_info->nvalue_count; i++) {
>> - char *name;
>> - char volt_name[32];
>> -
>> - name = kzalloc(NVALUE_NAME_LEN + 1, GFP_KERNEL);
>> - if (!name) {
>> - dev_err(&pdev->dev, "%s: Unable to allocate
>> memory"
>> - " for n-value directory name\n",
> __func__);
>> - return -ENOMEM;
>> - }
>> + char name[NVALUE_NAME_LEN + 1];
> Is there any need to keep this inside the loop?
That's the correct place to declare it - the variable's scope should be
limited to the block where it's used.
> Defining it in the beginning of function might save a few cpu cycles.
I don't think so.
A.
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCHv2] arm: mach-omap2: smartreflex: fix another memory leak
2011-02-07 14:08 [PATCHv2] arm: mach-omap2: smartreflex: fix another memory leak Aaro Koskinen
2011-02-07 15:04 ` Vishwanath Sripathy
@ 2011-02-14 22:38 ` Kevin Hilman
1 sibling, 0 replies; 4+ messages in thread
From: Kevin Hilman @ 2011-02-14 22:38 UTC (permalink / raw)
To: linux-arm-kernel
Aaro Koskinen <aaro.koskinen@nokia.com> writes:
> Temporary strings with volt_* file names should be released after the
> debugfs entries are created. While at it, also simplify the string
> allocation, and use just snprintf() to create the name.
>
> The patch eliminates kmemleak reports with the following stack trace
> (multiple objects depending on HW):
>
> unreferenced object 0xcedbc5a0 (size 64):
> comm "swapper", pid 1, jiffies 4294929375 (age 423.734s)
> hex dump (first 32 bytes):
> 76 6f 6c 74 5f 39 37 35 30 30 30 00 00 00 00 00 volt_975000.....
> 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
> backtrace:
> [<c012fee0>] create_object+0x104/0x208
> [<c012dbc8>] kmem_cache_alloc_trace+0xf0/0x17c
> [<c0013f64>] omap_sr_probe+0x314/0x420
> [<c02a1724>] platform_drv_probe+0x18/0x1c
> [<c02a088c>] driver_probe_device+0xc8/0x188
> [<c02a09b4>] __driver_attach+0x68/0x8c
> [<c02a00ac>] bus_for_each_dev+0x44/0x74
> [<c029f9e0>] bus_add_driver+0xa0/0x228
> [<c02a0cac>] driver_register+0xa8/0x130
> [<c02a1b2c>] platform_driver_probe+0x18/0x8c
> [<c0013c1c>] sr_init+0x40/0x74
> [<c005a554>] do_one_initcall+0xc8/0x1a0
> [<c00084f4>] kernel_init+0x150/0x218
> [<c0065d64>] kernel_thread_exit+0x0/0x8
> [<ffffffff>] 0xffffffff
>
> Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
> ---
>
> v2: Get rid of kmalloc().
Replied to the wrong patch earlier.
Just to be clear, I'm queuing v2 for the 2.6.38-rc cycle.
Kevin
> arch/arm/mach-omap2/smartreflex.c | 15 +++------------
> 1 files changed, 3 insertions(+), 12 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/smartreflex.c b/arch/arm/mach-omap2/smartreflex.c
> index 77ecebf..e54db84 100644
> --- a/arch/arm/mach-omap2/smartreflex.c
> +++ b/arch/arm/mach-omap2/smartreflex.c
> @@ -927,19 +927,10 @@ static int __init omap_sr_probe(struct platform_device *pdev)
> }
>
> for (i = 0; i < sr_info->nvalue_count; i++) {
> - char *name;
> - char volt_name[32];
> -
> - name = kzalloc(NVALUE_NAME_LEN + 1, GFP_KERNEL);
> - if (!name) {
> - dev_err(&pdev->dev, "%s: Unable to allocate memory"
> - " for n-value directory name\n", __func__);
> - return -ENOMEM;
> - }
> + char name[NVALUE_NAME_LEN + 1];
>
> - strcpy(name, "volt_");
> - sprintf(volt_name, "%d", volt_data[i].volt_nominal);
> - strcat(name, volt_name);
> + snprintf(name, sizeof(name), "volt_%d",
> + volt_data[i].volt_nominal);
> (void) debugfs_create_x32(name, S_IRUGO | S_IWUGO, nvalue_dir,
> &(sr_info->nvalue_table[i].nvalue));
> }
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2011-02-14 22:38 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-02-07 14:08 [PATCHv2] arm: mach-omap2: smartreflex: fix another memory leak Aaro Koskinen
2011-02-07 15:04 ` Vishwanath Sripathy
2011-02-07 15:14 ` Aaro Koskinen
2011-02-14 22:38 ` Kevin Hilman
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).