Re: [PATCH v8 0/3] arm64: dts: cn913x: add COM Express boards

[Gregory CLEMENT <gregory.clement@bootlin.com>]

Elad Nachman <enachman@marvell.com> writes:

> From: Elad Nachman <enachman@marvell.com>
>
> Add support for CN9130 and CN9131 COM Express Type 7 CPU
> module boards by Marvell.
> Add device tree bindings for this board.
> Define these COM Express CPU modules as dtsi, and
> provide a dtsi file for a carrier board (Marvell AC5X RD
> COM Express type 7 carrier board).
> This Carrier board only utilizes the PCIe link, hence no
> special device / driver support is provided by this dtsi file.
> Finally, add dts file for the combined carrier and CPU module.
>
> v8:
>    1) swap enum for const in dt bindings
>
> v7:
>    1) update MAINTAINERS file to contain all marvell arm64
>       dts file in one line, covering all files
>    2) Add Documentation to carrier dtsi and combined carrier
>       and CPU module dts, explaining the configuration and
>       modes of operations of the carrier and the combined
>       system.
>
> v6:
>    1) Add cn9130 COM Express system
>
>    2) Drop with from compatibility name of COM Express system
>
>    3) Fix indentation issues of dt bindings
>
> v5:
>
>    1) List only carrier compatibility on carrier dtsi
>
>    2) Fix dt_bindings_check warnings using latest yamllint/dtschema
>
>    3) Fix subject lines to remove unnecessary wordings.
>
>    4) Remove dt bindings for standalone CPU modules
>
>    5) Move CN913x dt bindings to A7K dt bindings file
>
>    6) Fix dtbs_check warnings for dtb and bindings,
>       using latest yamllint/dtschema.
>
>    7) Move memory definition to main dts file, as memory
>       is socket based.
>
> v4:
>    1) reorder patches - dt bindings before dts/dtsi files
>
>    2) correct description in dt bindings
>
>    3) separate dt bindings for CPU module, carrier and combination
>
>    4) make carrier board dts into dtsi, make dts for combination of
>       carrier and CPU module
>
>    5) correct compatibility strings and file names to use dashes
>       instead of underscores
>
> v3:
>    1) Remove acronym which creates warnings for checkpatch.pl
>
>    2) Correct compatibility string for ac5x rd board
>
>    3) Add above compatibility string to dt bindings
>
>    4) update MAINTAINERS file with ac5 series dts files
>
>    5) remove memory property from carrier dts
>
>    6) add comment explaining that OOB RGMII ethernet port
>       connector and PHY are both on CPU module
>
> v2:
>    1) add compatibility string for the board
>
>    2) remove unneeded hard-coded PHY LED blinking mode initialization
>
>    3) Split the CPU portion of the carrier board to
>       dtsi files, and define a dts file for the AC5X RD
>       carrier board.
>
> Elad Nachman (3):
>   MAINTAINERS: add ac5 to list of maintained Marvell dts files
>   dt-bindings: arm64: add Marvell COM Express boards
>   arm64: dts: cn913x: add device trees for COM Express boards

Applied on mvebu/dt64

Thanks,

Gregory

>
>  .../bindings/arm/marvell/armada-7k-8k.yaml    |  22 ++++
>  MAINTAINERS                                   |   3 +-
>  arch/arm64/boot/dts/marvell/Makefile          |   1 +
>  .../dts/marvell/ac5x-rd-carrier-cn9131.dts    |  44 +++++++
>  .../boot/dts/marvell/ac5x-rd-carrier.dtsi     |  34 ++++++
>  .../dts/marvell/cn9130-db-comexpress.dtsi     |  96 ++++++++++++++++
>  .../dts/marvell/cn9131-db-comexpress.dtsi     | 108 ++++++++++++++++++
>  7 files changed, 306 insertions(+), 2 deletions(-)
>  create mode 100644 arch/arm64/boot/dts/marvell/ac5x-rd-carrier-cn9131.dts
>  create mode 100644 arch/arm64/boot/dts/marvell/ac5x-rd-carrier.dtsi
>  create mode 100644 arch/arm64/boot/dts/marvell/cn9130-db-comexpress.dtsi
>  create mode 100644 arch/arm64/boot/dts/marvell/cn9131-db-comexpress.dtsi
>
> -- 
> 2.25.1
>

-- 
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel