From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Baruch Siach <baruch@tkos.co.il>,
Russell King <linux@armlinux.org.uk>,
Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Cc: Dennis Gilmore <dennis@ausil.us>,
Baruch Siach <baruch@tkos.co.il>,
Aditya Prayoga <aditya@kobol.io>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/3] ARM: armada-38x-solidrun-microsom: move i2c0 to SOM DT
Date: Wed, 08 Jan 2020 10:59:20 +0100 [thread overview]
Message-ID: <87d0bub75z.fsf@FE-laptop> (raw)
In-Reply-To: <87fb5ab9674efaf5dbf5fed779926eccf248306b.1577953408.git.baruch@tkos.co.il>
Hi Baruch,
> Move the i2c0 controller properties to the SOM .dtsi. This is
> preparation for adding an i2c device at the SOM level.
>
> Cc: Dennis Gilmore <dennis@ausil.us>
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Applied on mvebu/dt
Thanks,
Gregory
> ---
> arch/arm/boot/dts/armada-388-clearfog.dtsi | 5 -----
> arch/arm/boot/dts/armada-388-helios4.dts | 5 -----
> arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi | 7 +++++++
> 3 files changed, 7 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-388-clearfog.dtsi b/arch/arm/boot/dts/armada-388-clearfog.dtsi
> index 0d81600ca247..a6edea6f50d1 100644
> --- a/arch/arm/boot/dts/armada-388-clearfog.dtsi
> +++ b/arch/arm/boot/dts/armada-388-clearfog.dtsi
> @@ -111,11 +111,6 @@ ð2 {
> };
>
> &i2c0 {
> - clock-frequency = <400000>;
> - pinctrl-0 = <&i2c0_pins>;
> - pinctrl-names = "default";
> - status = "okay";
> -
> /*
> * PCA9655 GPIO expander, up to 1MHz clock.
> * 0-CON3 CLKREQ#
> diff --git a/arch/arm/boot/dts/armada-388-helios4.dts b/arch/arm/boot/dts/armada-388-helios4.dts
> index 705adfa8c680..fb49df2a3bce 100644
> --- a/arch/arm/boot/dts/armada-388-helios4.dts
> +++ b/arch/arm/boot/dts/armada-388-helios4.dts
> @@ -140,11 +140,6 @@ usb3_phy: usb3-phy {
> soc {
> internal-regs {
> i2c@11000 {
> - clock-frequency = <400000>;
> - pinctrl-0 = <&i2c0_pins>;
> - pinctrl-names = "default";
> - status = "okay";
> -
> /*
> * PCA9655 GPIO expander, up to 1MHz clock.
> * 0-Board Revision bit 0 #
> diff --git a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
> index 3a7f9c1ac346..cd39312fb50d 100644
> --- a/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
> +++ b/arch/arm/boot/dts/armada-38x-solidrun-microsom.dtsi
> @@ -71,6 +71,13 @@ phy_dedicated: ethernet-phy@0 {
> };
> };
>
> +&i2c0 {
> + clock-frequency = <400000>;
> + pinctrl-0 = <&i2c0_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> &pinctrl {
> microsom_phy_clk_pins: microsom-phy-clk-pins {
> marvell,pins = "mpp45";
> --
> 2.24.1
>
--
Gregory Clement, Bootlin
Embedded Linux and Kernel engineering
http://bootlin.com
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
prev parent reply other threads:[~2020-01-08 9:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-02 8:23 [PATCH 1/3] ARM: armada-38x-solidrun-microsom: move i2c0 to SOM DT Baruch Siach
2020-01-02 8:23 ` [PATCH 2/3] ARM: dts: armada-38x-solidrun-microsom: add eeprom Baruch Siach
2020-01-08 9:59 ` Gregory CLEMENT
2020-01-02 8:23 ` [PATCH 3/3] ARM: dts: armada-388-clearfog: " Baruch Siach
2020-01-08 9:59 ` Gregory CLEMENT
2020-01-08 9:59 ` Gregory CLEMENT [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87d0bub75z.fsf@FE-laptop \
--to=gregory.clement@bootlin.com \
--cc=aditya@kobol.io \
--cc=andrew@lunn.ch \
--cc=baruch@tkos.co.il \
--cc=dennis@ausil.us \
--cc=jason@lakedaemon.net \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux@armlinux.org.uk \
--cc=sebastian.hesselbarth@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).