From mboxrd@z Thu Jan 1 00:00:00 1970 From: khilman@ti.com (Kevin Hilman) Date: Mon, 27 Feb 2012 17:25:55 -0800 Subject: [PATCH 0/6] ARM: OMAP4: core retention support In-Reply-To: <1330003320-17400-1-git-send-email-t-kristo@ti.com> (Tero Kristo's message of "Thu, 23 Feb 2012 15:21:54 +0200") References: <1330003320-17400-1-git-send-email-t-kristo@ti.com> Message-ID: <87d38zrboc.fsf@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Tero Kristo writes: > This set adds core retention support on top of mainline. The set > also adds IO CHAIN wakeup capability for OMAP4, which is a nice feature > to have while trying suspend / resume with CSWR as it is quite difficult > to wake up the device without this. > > Patch 6 might cause some stir, but this is needed as omap4 PRCM chain > handler currently does not work without SPARSE_IRQ. Enabling the > SPARSE_IRQ causes a WARN from gic during boot for omap4, and attempting > to fix this creates some spam from interrupt handling code which seems to > originate from GPMC/GPIO. Also, omap3 boot breaks completely, > thus it is impossible to enable this option as of now. > > Tested on OMAP4 blaze board, with OMAP4430 EMU chip. Suspend / resume > works nicely, and wakeup with UART3 works. The powerdomain state info > under pm-debug appears to be somewhat bogus right after boot, but fixes > itself during suspend. This should be addressed separately. Also > verified that suspend / resume with OMAP3 beagle is okay. Please separate out the IO daisy chain stuff as a separate series. Vishwa had a multiple patch series that cleaned some of this up and also made it common for OMAP3 and 4. http://marc.info/?l=linux-omap&m=132387916807059&w=2 I had several review comments on that series that were never responded to, http://marc.info/?l=linux-omap&w=2&r=1&s=DaisyChain&q=b so I'd first like to understand why that series was dropped and only selected parts were taken for $SUBJECT series, and what is the plan for the IO daisy chain series. Kevin