From mboxrd@z Thu Jan 1 00:00:00 1970 From: bgamari.foss@gmail.com (Ben Gamari) Date: Tue, 18 Jan 2011 08:51:52 -0500 Subject: [PATCH] omap2-beagle: Depend upon CONFIG_GPIO_TWL4030 In-Reply-To: <20110118031038.GA2436@legolas.emea.dhcp.ti.com> References: <1295299548-22839-1-git-send-email-bgamari.foss@gmail.com> <20110118031038.GA2436@legolas.emea.dhcp.ti.com> Message-ID: <87d3nus4jr.fsf@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Tue, 18 Jan 2011 05:10:39 +0200, Felipe Balbi wrote: > NAK. This is totally bogus. The board doesn't really depend on > GPIO_TWL4030, the MMC driver does. > I've looked a little more deeply into this and I'm not entirely convinced that what you claim is true. It seems that the only dependency that the MMC module _might_ have on the TWL4030 is for the LDOs, which I believe should be covered in the regulator driver, not GPIO. In light of this, I think the use of the TWL's GPIO lines for MMC it might be a board specific design decision. In the case of the Beagleboard, they are only TWL GPIO used by the MMC configuration is for .gpio_cd but as far as I could see they could have chosen any GPIO for this. Am I missing something? Cheers, - Ben