From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Thu, 21 Dec 2017 11:53:27 +0100 Subject: [PATCH 0/3] Add DVFS support on CPU clock for Armada 37xx In-Reply-To: <20171130134029.20751-1-gregory.clement@free-electrons.com> (Gregory CLEMENT's message of "Thu, 30 Nov 2017 14:40:26 +0100") References: <20171130134029.20751-1-gregory.clement@free-electrons.com> Message-ID: <87efnofj2w.fsf@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hello, On jeu., nov. 30 2017, Gregory CLEMENT wrote: > Hi, > > This small series is needed to use DVFS on Armada 37xx. When DVFS is > enabled the CPU clock setting is done using an other set of registers > from the North Bridge Power Management block. > > The series adds the possibility to modify the CPU frequency using the > associate load level matching the target frequency. However > configuring the frequencies for each load is done by the cpufreq > driver submitted in a separate series. > > Obviously having both series (cpufreq and clk) is needed to support > DVFS on Armada 37xx, but there is no dependencies between the series > (for building or at runtime). I sent this series 3 weeks ago and I didn't have any feedback on it. Does it mean that the series is OK for you and that you wait for a PR for it? Thanks, Gregory > > Gregory CLEMENT (3): > clk: mvebu: armada-37xx-periph: cosmetic changes > clk: mvebu: armada-37xx-periph: prepare cpu clk to be used with DVFS > clk: mvebu: armada-37xx-periph: add DVFS support for cpu clocks > > drivers/clk/mvebu/armada-37xx-periph.c | 310 +++++++++++++++++++++++++++++++-- > 1 file changed, 293 insertions(+), 17 deletions(-) > > -- > 2.15.0 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com