From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/4] ARM: dt: mvebu: ix4-300d: Cleanup NAND partition ranges
Date: Mon, 30 Nov 2015 15:20:08 +0100 [thread overview]
Message-ID: <87egf7602v.fsf@free-electrons.com> (raw)
In-Reply-To: <20151128170155.GI32356@lunn.ch> (Andrew Lunn's message of "Sat, 28 Nov 2015 18:01:55 +0100")
Hi Sebastian and Andrew,
On sam., nov. 28 2015, Andrew Lunn <andrew@lunn.ch> wrote:
> On Sat, Nov 28, 2015 at 12:14:07PM +0100, Sebastian Hesselbarth wrote:
>> Prefix all partition reg properties to 32-bit to ease readability.
>> While at it, also remove a stale x in front of boot partition
>> offset and make some upper-case hex numbers lower-case.
>>
>> Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
>
> Acked-by: Andrew Lunn <andrew@lunn.ch>
Applied on mvebu/dt
Thanks,
Gregory
>
> Andrew
>
>> ---
>> Cc: Jason Cooper <jason@lakedaemon.net>
>> Cc: Andrew Lunn <andrew@lunn.ch>
>> Cc: Gregory Clement <gregory.clement@free-electrons.com>
>> Cc: Rob Herring <robh+dt@kernel.org>
>> Cc: Pawel Moll <pawel.moll@arm.com>
>> Cc: Mark Rutland <mark.rutland@arm.com>
>> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
>> Cc: Kumar Gala <galak@codeaurora.org>
>> Cc: Russell King <linux@arm.linux.org.uk>
>> Cc: Benoit Masson <yahoo@perenite.com>
>> Cc: linux-arm-kernel at lists.infradead.org
>> Cc: devicetree at vger.kernel.org
>> Cc: linux-kernel at vger.kernel.org
>> ---
>> arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts | 14 +++++++-------
>> 1 file changed, 7 insertions(+), 7 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
>> index 76781fd18624..13cf69a8d0fb 100644
>> --- a/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
>> +++ b/arch/arm/boot/dts/armada-xp-lenovo-ix4-300d.dts
>> @@ -157,35 +157,35 @@
>>
>> partition at 0 {
>> label = "u-boot";
>> - reg = <0x0000000 0xe0000>;
>> + reg = <0x00000000 0x000e0000>;
>> read-only;
>> };
>>
>> partition at e0000 {
>> label = "u-boot-env";
>> - reg = <0xe0000 0x20000>;
>> + reg = <0x000e0000 0x00020000>;
>> read-only;
>> };
>>
>> partition at 100000 {
>> label = "u-boot-env2";
>> - reg = <0x100000 0x20000>;
>> + reg = <0x00100000 0x00020000>;
>> read-only;
>> };
>>
>> partition at 120000 {
>> label = "zImage";
>> - reg = <0x120000 0x400000>;
>> + reg = <0x00120000 0x00400000>;
>> };
>>
>> partition at 520000 {
>> label = "initrd";
>> - reg = <0x520000 0x400000>;
>> + reg = <0x00520000 0x00400000>;
>> };
>>
>> - partition at xE00000 {
>> + partition at e00000 {
>> label = "boot";
>> - reg = <0xE00000 0x3F200000>;
>> + reg = <0x00e00000 0x3f200000>;
>> };
>> };
>> };
>> --
>> 2.1.4
>>
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2015-11-30 14:20 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-11-28 11:14 [PATCH 0/4] ARM: dt: mvebu: ix4-300d: NAND cleanup and ECC Sebastian Hesselbarth
2015-11-28 11:14 ` [PATCH 1/4] ARM: dt: mvebu: ix4-300d: remove whole flash partition Sebastian Hesselbarth
2015-11-28 16:52 ` Andrew Lunn
2015-11-28 17:38 ` Sebastian Hesselbarth
2015-11-28 20:32 ` Benoit Masson
2015-11-28 21:11 ` Andrew Lunn
2015-11-30 14:16 ` Gregory CLEMENT
2015-11-28 11:14 ` [PATCH 2/4] ARM: dt: mvebu: ix4-300d: move partitions to partition sub-node Sebastian Hesselbarth
2015-11-28 17:00 ` Andrew Lunn
2015-11-28 17:38 ` Sebastian Hesselbarth
2015-11-30 14:17 ` Gregory CLEMENT
2015-11-28 11:14 ` [PATCH 3/4] ARM: dt: mvebu: ix4-300d: Cleanup NAND partition ranges Sebastian Hesselbarth
2015-11-28 17:01 ` Andrew Lunn
2015-11-30 14:20 ` Gregory CLEMENT [this message]
2015-11-28 11:14 ` [PATCH 4/4] ARM: dt: mvebu: ix4-300d: Add ECC properties to NAND flash Sebastian Hesselbarth
2015-11-28 17:02 ` Andrew Lunn
2015-11-29 14:35 ` Thomas Petazzoni
2015-11-30 8:30 ` Sebastian Hesselbarth
2015-11-30 14:22 ` Gregory CLEMENT
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87egf7602v.fsf@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).