linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
* [PATCH 1/2] ARM: mvebu_v7_defconfig: sync defconfig
@ 2018-06-28  7:06 Baruch Siach
  2018-06-28  7:06 ` [PATCH 2/2] ARM: mvebu_v7_defconfig: enable SFP support Baruch Siach
  2018-06-28 12:05 ` [PATCH 1/2] ARM: mvebu_v7_defconfig: sync defconfig Gregory CLEMENT
  0 siblings, 2 replies; 7+ messages in thread
From: Baruch Siach @ 2018-06-28  7:06 UTC (permalink / raw)
  To: linux-arm-kernel

Use savedefconfig to sync defconfig for current kernel. No change in
generated configuration.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
 arch/arm/configs/mvebu_v7_defconfig | 12 ++----------
 1 file changed, 2 insertions(+), 10 deletions(-)

diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig
index ddaeda4f2e82..1ff371ae688d 100644
--- a/arch/arm/configs/mvebu_v7_defconfig
+++ b/arch/arm/configs/mvebu_v7_defconfig
@@ -1,5 +1,4 @@
 CONFIG_SYSVIPC=y
-CONFIG_FHANDLE=y
 CONFIG_HIGH_RES_TIMERS=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_BLK_DEV_INITRD=y
@@ -16,10 +15,8 @@ CONFIG_MACH_ARMADA_39X=y
 CONFIG_MACH_ARMADA_XP=y
 CONFIG_MACH_DOVE=y
 CONFIG_PCI=y
-CONFIG_PCI_MSI=y
 CONFIG_PCI_MVEBU=y
 CONFIG_SMP=y
-CONFIG_AEABI=y
 CONFIG_HIGHMEM=y
 # CONFIG_COMPACTION is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
@@ -58,7 +55,6 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_MARVELL=y
 CONFIG_MTD_SPI_NOR=y
-CONFIG_SRAM=y
 CONFIG_MTD_UBI=y
 CONFIG_EEPROM_AT24=y
 CONFIG_BLK_DEV_SD=y
@@ -67,12 +63,10 @@ CONFIG_SATA_AHCI=y
 CONFIG_AHCI_MVEBU=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_DSA_MV88E6XXX=y
 CONFIG_MV643XX_ETH=y
 CONFIG_MVNETA=y
 CONFIG_MVPP2=y
 CONFIG_MARVELL_PHY=y
-CONFIG_FIXED_PHY=y
 CONFIG_MWIFIEX=y
 CONFIG_MWIFIEX_SDIO=y
 CONFIG_INPUT_EVDEV=y
@@ -88,10 +82,11 @@ CONFIG_SPI=y
 CONFIG_SPI_ORION=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_PCA953X=y
-CONFIG_POWER_SUPPLY=y
 CONFIG_POWER_RESET=y
 CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_SUPPLY=y
 CONFIG_SENSORS_GPIO_FAN=y
+CONFIG_SENSORS_PWM_FAN=y
 CONFIG_THERMAL=y
 CONFIG_ARMADA_THERMAL=y
 CONFIG_WATCHDOG=y
@@ -135,7 +130,6 @@ CONFIG_MV_XOR=y
 # CONFIG_IOMMU_SUPPORT is not set
 CONFIG_MEMORY=y
 CONFIG_PWM=y
-CONFIG_SENSORS_PWM_FAN=y
 CONFIG_EXT4_FS=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
@@ -153,10 +147,8 @@ CONFIG_NLS_ISO8859_2=y
 CONFIG_NLS_UTF8=y
 CONFIG_PRINTK_TIME=y
 CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
 CONFIG_MAGIC_SYSRQ=y
 # CONFIG_SCHED_DEBUG is not set
-CONFIG_TIMER_STATS=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 CONFIG_DEBUG_USER=y
 CONFIG_CRYPTO_DEV_MARVELL_CESA=y
-- 
2.18.0

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH 2/2] ARM: mvebu_v7_defconfig: enable SFP support
  2018-06-28  7:06 [PATCH 1/2] ARM: mvebu_v7_defconfig: sync defconfig Baruch Siach
@ 2018-06-28  7:06 ` Baruch Siach
  2018-06-28 12:07   ` Gregory CLEMENT
  2018-06-28 13:14   ` Thomas Petazzoni
  2018-06-28 12:05 ` [PATCH 1/2] ARM: mvebu_v7_defconfig: sync defconfig Gregory CLEMENT
  1 sibling, 2 replies; 7+ messages in thread
From: Baruch Siach @ 2018-06-28  7:06 UTC (permalink / raw)
  To: linux-arm-kernel

This enables support for SFP cages on SolidRun Armada 38x and 8k
platforms.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
---
 arch/arm/configs/mvebu_v7_defconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig
index 1ff371ae688d..55140219ab11 100644
--- a/arch/arm/configs/mvebu_v7_defconfig
+++ b/arch/arm/configs/mvebu_v7_defconfig
@@ -66,6 +66,7 @@ CONFIG_NETDEVICES=y
 CONFIG_MV643XX_ETH=y
 CONFIG_MVNETA=y
 CONFIG_MVPP2=y
+CONFIG_SFP=y
 CONFIG_MARVELL_PHY=y
 CONFIG_MWIFIEX=y
 CONFIG_MWIFIEX_SDIO=y
-- 
2.18.0

^ permalink raw reply related	[flat|nested] 7+ messages in thread

* [PATCH 1/2] ARM: mvebu_v7_defconfig: sync defconfig
  2018-06-28  7:06 [PATCH 1/2] ARM: mvebu_v7_defconfig: sync defconfig Baruch Siach
  2018-06-28  7:06 ` [PATCH 2/2] ARM: mvebu_v7_defconfig: enable SFP support Baruch Siach
@ 2018-06-28 12:05 ` Gregory CLEMENT
  1 sibling, 0 replies; 7+ messages in thread
From: Gregory CLEMENT @ 2018-06-28 12:05 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Baruch,
 
 On jeu., juin 28 2018, Baruch Siach <baruch@tkos.co.il> wrote:

> Use savedefconfig to sync defconfig for current kernel. No change in
> generated configuration.
>
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>

Applied on mvebu/arm

Thanks,

Gregory

> ---
>  arch/arm/configs/mvebu_v7_defconfig | 12 ++----------
>  1 file changed, 2 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig
> index ddaeda4f2e82..1ff371ae688d 100644
> --- a/arch/arm/configs/mvebu_v7_defconfig
> +++ b/arch/arm/configs/mvebu_v7_defconfig
> @@ -1,5 +1,4 @@
>  CONFIG_SYSVIPC=y
> -CONFIG_FHANDLE=y
>  CONFIG_HIGH_RES_TIMERS=y
>  CONFIG_LOG_BUF_SHIFT=14
>  CONFIG_BLK_DEV_INITRD=y
> @@ -16,10 +15,8 @@ CONFIG_MACH_ARMADA_39X=y
>  CONFIG_MACH_ARMADA_XP=y
>  CONFIG_MACH_DOVE=y
>  CONFIG_PCI=y
> -CONFIG_PCI_MSI=y
>  CONFIG_PCI_MVEBU=y
>  CONFIG_SMP=y
> -CONFIG_AEABI=y
>  CONFIG_HIGHMEM=y
>  # CONFIG_COMPACTION is not set
>  CONFIG_ZBOOT_ROM_TEXT=0x0
> @@ -58,7 +55,6 @@ CONFIG_MTD_M25P80=y
>  CONFIG_MTD_NAND=y
>  CONFIG_MTD_NAND_MARVELL=y
>  CONFIG_MTD_SPI_NOR=y
> -CONFIG_SRAM=y
>  CONFIG_MTD_UBI=y
>  CONFIG_EEPROM_AT24=y
>  CONFIG_BLK_DEV_SD=y
> @@ -67,12 +63,10 @@ CONFIG_SATA_AHCI=y
>  CONFIG_AHCI_MVEBU=y
>  CONFIG_SATA_MV=y
>  CONFIG_NETDEVICES=y
> -CONFIG_NET_DSA_MV88E6XXX=y
>  CONFIG_MV643XX_ETH=y
>  CONFIG_MVNETA=y
>  CONFIG_MVPP2=y
>  CONFIG_MARVELL_PHY=y
> -CONFIG_FIXED_PHY=y
>  CONFIG_MWIFIEX=y
>  CONFIG_MWIFIEX_SDIO=y
>  CONFIG_INPUT_EVDEV=y
> @@ -88,10 +82,11 @@ CONFIG_SPI=y
>  CONFIG_SPI_ORION=y
>  CONFIG_GPIO_SYSFS=y
>  CONFIG_GPIO_PCA953X=y
> -CONFIG_POWER_SUPPLY=y
>  CONFIG_POWER_RESET=y
>  CONFIG_POWER_RESET_GPIO=y
> +CONFIG_POWER_SUPPLY=y
>  CONFIG_SENSORS_GPIO_FAN=y
> +CONFIG_SENSORS_PWM_FAN=y
>  CONFIG_THERMAL=y
>  CONFIG_ARMADA_THERMAL=y
>  CONFIG_WATCHDOG=y
> @@ -135,7 +130,6 @@ CONFIG_MV_XOR=y
>  # CONFIG_IOMMU_SUPPORT is not set
>  CONFIG_MEMORY=y
>  CONFIG_PWM=y
> -CONFIG_SENSORS_PWM_FAN=y
>  CONFIG_EXT4_FS=y
>  CONFIG_ISO9660_FS=y
>  CONFIG_JOLIET=y
> @@ -153,10 +147,8 @@ CONFIG_NLS_ISO8859_2=y
>  CONFIG_NLS_UTF8=y
>  CONFIG_PRINTK_TIME=y
>  CONFIG_DEBUG_INFO=y
> -CONFIG_DEBUG_FS=y
>  CONFIG_MAGIC_SYSRQ=y
>  # CONFIG_SCHED_DEBUG is not set
> -CONFIG_TIMER_STATS=y
>  # CONFIG_DEBUG_BUGVERBOSE is not set
>  CONFIG_DEBUG_USER=y
>  CONFIG_CRYPTO_DEV_MARVELL_CESA=y
> -- 
> 2.18.0
>

-- 
Gregory Clement, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH 2/2] ARM: mvebu_v7_defconfig: enable SFP support
  2018-06-28  7:06 ` [PATCH 2/2] ARM: mvebu_v7_defconfig: enable SFP support Baruch Siach
@ 2018-06-28 12:07   ` Gregory CLEMENT
  2018-06-28 13:14   ` Thomas Petazzoni
  1 sibling, 0 replies; 7+ messages in thread
From: Gregory CLEMENT @ 2018-06-28 12:07 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Baruch,
 
 On jeu., juin 28 2018, Baruch Siach <baruch@tkos.co.il> wrote:

> This enables support for SFP cages on SolidRun Armada 38x and 8k
> platforms.
>
> Signed-off-by: Baruch Siach <baruch@tkos.co.il>

Applied on mvebu/arm

Thanks,

Gregory

> ---
>  arch/arm/configs/mvebu_v7_defconfig | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/configs/mvebu_v7_defconfig b/arch/arm/configs/mvebu_v7_defconfig
> index 1ff371ae688d..55140219ab11 100644
> --- a/arch/arm/configs/mvebu_v7_defconfig
> +++ b/arch/arm/configs/mvebu_v7_defconfig
> @@ -66,6 +66,7 @@ CONFIG_NETDEVICES=y
>  CONFIG_MV643XX_ETH=y
>  CONFIG_MVNETA=y
>  CONFIG_MVPP2=y
> +CONFIG_SFP=y
>  CONFIG_MARVELL_PHY=y
>  CONFIG_MWIFIEX=y
>  CONFIG_MWIFIEX_SDIO=y
> -- 
> 2.18.0
>

-- 
Gregory Clement, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH 2/2] ARM: mvebu_v7_defconfig: enable SFP support
  2018-06-28  7:06 ` [PATCH 2/2] ARM: mvebu_v7_defconfig: enable SFP support Baruch Siach
  2018-06-28 12:07   ` Gregory CLEMENT
@ 2018-06-28 13:14   ` Thomas Petazzoni
  2018-06-28 14:44     ` Baruch Siach
  1 sibling, 1 reply; 7+ messages in thread
From: Thomas Petazzoni @ 2018-06-28 13:14 UTC (permalink / raw)
  To: linux-arm-kernel

Hello Baruch,

On Thu, 28 Jun 2018 10:06:15 +0300, Baruch Siach wrote:
> This enables support for SFP cages on SolidRun Armada 38x and 8k

You're running a 32-bit kernel on 8K platforms ?

Thomas
-- 
Thomas Petazzoni, CTO, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
https://bootlin.com

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH 2/2] ARM: mvebu_v7_defconfig: enable SFP support
  2018-06-28 13:14   ` Thomas Petazzoni
@ 2018-06-28 14:44     ` Baruch Siach
  2018-06-28 14:53       ` Gregory CLEMENT
  0 siblings, 1 reply; 7+ messages in thread
From: Baruch Siach @ 2018-06-28 14:44 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Thomas,

On Thu, Jun 28, 2018 at 03:14:07PM +0200, Thomas Petazzoni wrote:
> On Thu, 28 Jun 2018 10:06:15 +0300, Baruch Siach wrote:
> > This enables support for SFP cages on SolidRun Armada 38x and 8k
> 
> You're running a 32-bit kernel on 8K platforms ?

No, though that is probably possible.

But you are right. In practice this patch only affects 32-bit mvebu platforms. 
Support for 8k platforms would require a separate patch.

Gregory, you mentioned earlier that mvebu branches are not immutable yet. Can 
you drop reference to 8k platforms from the commit log?

Thanks,
baruch

-- 
     http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
   - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -

^ permalink raw reply	[flat|nested] 7+ messages in thread

* [PATCH 2/2] ARM: mvebu_v7_defconfig: enable SFP support
  2018-06-28 14:44     ` Baruch Siach
@ 2018-06-28 14:53       ` Gregory CLEMENT
  0 siblings, 0 replies; 7+ messages in thread
From: Gregory CLEMENT @ 2018-06-28 14:53 UTC (permalink / raw)
  To: linux-arm-kernel

Hi Baruch,
 
 On jeu., juin 28 2018, Baruch Siach <baruch@tkos.co.il> wrote:

> Hi Thomas,
>
> On Thu, Jun 28, 2018 at 03:14:07PM +0200, Thomas Petazzoni wrote:
>> On Thu, 28 Jun 2018 10:06:15 +0300, Baruch Siach wrote:
>> > This enables support for SFP cages on SolidRun Armada 38x and 8k
>> 
>> You're running a 32-bit kernel on 8K platforms ?
>
> No, though that is probably possible.
>
> But you are right. In practice this patch only affects 32-bit mvebu platforms. 
> Support for 8k platforms would require a separate patch.
>
> Gregory, you mentioned earlier that mvebu branches are not immutable yet. Can 
> you drop reference to 8k platforms from the commit log?

it's done, now

Gregory

>
> Thanks,
> baruch
>
> -- 
>      http://baruch.siach.name/blog/                  ~. .~   Tk Open Systems
> =}------------------------------------------------ooO--U--Ooo------------{=
>    - baruch at tkos.co.il - tel: +972.52.368.4656, http://www.tkos.co.il -

-- 
Gregory Clement, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com

^ permalink raw reply	[flat|nested] 7+ messages in thread

end of thread, other threads:[~2018-06-28 14:53 UTC | newest]

Thread overview: 7+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-06-28  7:06 [PATCH 1/2] ARM: mvebu_v7_defconfig: sync defconfig Baruch Siach
2018-06-28  7:06 ` [PATCH 2/2] ARM: mvebu_v7_defconfig: enable SFP support Baruch Siach
2018-06-28 12:07   ` Gregory CLEMENT
2018-06-28 13:14   ` Thomas Petazzoni
2018-06-28 14:44     ` Baruch Siach
2018-06-28 14:53       ` Gregory CLEMENT
2018-06-28 12:05 ` [PATCH 1/2] ARM: mvebu_v7_defconfig: sync defconfig Gregory CLEMENT

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).