Re: [PATCH 4/6] rtc: st-lpc: Fix initial enable_irq/disable_irq balance

[Esben Haabendal <esben@geanix.com>]

Alexandre Belloni <alexandre.belloni@bootlin.com> writes:

> On 03/12/2024 11:45:34+0100, Esben Haabendal wrote:
>> Interrupts are automatically enabled when requested, so we need to
>> initialize irq_enabled accordingly to avoid causing an unbalanced enable
>> warning.
>> 
>> To: Patrice Chotard <patrice.chotard@foss.st.com>
>> Signed-off-by: Esben Haabendal <esben@geanix.com>
>> ---
>>  drivers/rtc/rtc-st-lpc.c | 1 +
>>  1 file changed, 1 insertion(+)
>> 
>> diff --git a/drivers/rtc/rtc-st-lpc.c b/drivers/rtc/rtc-st-lpc.c
>> index c6d4522411b312f94de2701ff4ff491e5323aa96..dbc2c23bca23f5de6de3fd4b39c9c67290bfd78d 100644
>> --- a/drivers/rtc/rtc-st-lpc.c
>> +++ b/drivers/rtc/rtc-st-lpc.c
>> @@ -218,6 +218,7 @@ static int st_rtc_probe(struct platform_device *pdev)
>>  		return -EINVAL;
>>  	}
>>  
>> +	rtc->irq_enabled = true;
>>  	ret = devm_request_irq(&pdev->dev, rtc->irq, st_rtc_handler,
>>  			       IRQF_NO_AUTOEN, pdev->name, rtc);
>
> Seeing the IRQF_NO_AUTOEN here, I guess the patch is not correct.

I guess you are right :)
Sorry about that. I only have HW available for testing the rtc-isl12022
driver here.

This patch should be dropped.

>
>>  	if (ret) {
>> 
>> -- 
>> 2.47.1
>>