From mboxrd@z Thu Jan  1 00:00:00 1970
From: gregory.clement@bootlin.com (Gregory CLEMENT)
Date: Wed, 27 Jun 2018 11:31:12 +0200
Subject: [PATCH v2] ARM: multi_v7_defconfig: Add Marvell NAND controller
 support
In-Reply-To: <20180528151357.29203-1-gregory.clement@bootlin.com> (Gregory
 CLEMENT's message of "Mon, 28 May 2018 17:13:57 +0200")
References: <20180528151357.29203-1-gregory.clement@bootlin.com>
Message-ID: <87h8lo8tjz.fsf@bootlin.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

Hello,
 
 On lun., mai 28 2018, Gregory CLEMENT <gregory.clement@bootlin.com> wrote:

> Add Marvell NAND controller support used by some Marvell Armada based
> boards.
>
> Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>

I didn't see this patch in v4.18-rc1 and I also didn't see any update
done on multi_v7_defconfig with the current configuration.

Would it possible doing it?

And I guess I will have to put this patch in my PR for 4.19, won't I?

Gregory

> ---
> Changelog v1 -> v2:
>
>  - Rebased on v4.17-rc1 (Dropped "ARM: multi_v7_defconfig: Update with
>    current configuration")
>
>  arch/arm/configs/multi_v7_defconfig | 1 +
>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
> index e6b3c96d4c09..3fcb17b38f50 100644
> --- a/arch/arm/configs/multi_v7_defconfig
> +++ b/arch/arm/configs/multi_v7_defconfig
> @@ -210,6 +210,7 @@ CONFIG_MTD_NAND_DENALI_DT=y
>  CONFIG_MTD_NAND_OMAP2=y
>  CONFIG_MTD_NAND_OMAP_BCH=y
>  CONFIG_MTD_NAND_ATMEL=y
> +CONFIG_MTD_NAND_MARVELL=y
>  CONFIG_MTD_NAND_GPMI_NAND=y
>  CONFIG_MTD_NAND_BRCMNAND=y
>  CONFIG_MTD_NAND_VF610_NFC=y
> -- 
> 2.17.0
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

-- 
Gregory Clement, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com