From mboxrd@z Thu Jan 1 00:00:00 1970 From: robert.jarzmik@free.fr (Robert Jarzmik) Date: Sat, 08 Oct 2016 11:23:52 +0200 Subject: [PATCH] Specify all interrupts for the GPIO controller. In-Reply-To: <1475489412-9758-1-git-send-email-vijaykumar@zilogic.com> (Vijay Kumar B.'s message of "Mon, 3 Oct 2016 15:40:12 +0530") References: <1475489412-9758-1-git-send-email-vijaykumar@zilogic.com> Message-ID: <87h98n8a8n.fsf@belgarion.home> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Vijay Kumar B writes: > The PXA GPIO controller has 3 interrupt outputs, this needs to be > indicated in the DTS file. Without this mainstone's CPLD interrupt 0 > will not be raised to the processor. > > Signed-off-by: Vijay Kumar B. > Reviewed-by: Deepak S. > --- > arch/arm/boot/dts/pxa2xx.dtsi | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/pxa2xx.dtsi b/arch/arm/boot/dts/pxa2xx.dtsi > index 5e5af07..9ca2e5b 100644 > --- a/arch/arm/boot/dts/pxa2xx.dtsi > +++ b/arch/arm/boot/dts/pxa2xx.dtsi > @@ -54,8 +54,8 @@ > reg = <0x40e00000 0x10000>; > gpio-controller; > #gpio-cells = <0x2>; > - interrupts = <10>; > - interrupt-names = "gpio_mux"; > + interrupts = <8 9 10>; > + interrupt-names = "gpio0", "gpio1", "gpio_mux"; > interrupt-controller; > #interrupt-cells = <0x2>; > ranges; Hi Vijay, A patch was already submitted in september for this in there : https://mail-archive.com/linux-kernel at vger.kernel.org/msg1239445.html Cheers. -- Robert