From mboxrd@z Thu Jan  1 00:00:00 1970
From: holgerschurig@gmail.com (Holger Schurig)
Date: Mon, 30 May 2016 11:36:36 +0200
Subject: [PATCH 2/2] ARM: dts: imx6q: add support for the Utilite Pro
In-Reply-To: <0cf90ebe86e0461f82cb22b2a6b6ea83@rwthex-s1-b.rwth-ad.de>
References: <1463957258-4893-1-git-send-email-christopher.spinrath@rwth-aachen.de>
 <c4ab0387041f42ada68296141befe332@rwthex-s1-b.rwth-ad.de>
 <20abc2f6769b4369ba87ec27274a090e@rwthex-s2-a.rwth-ad.de>
 <644530ff6bb04b5898dc33604dc7a93a@rwthex-s1-b.rwth-ad.de>
 <9b905766c6cc4680be4b33f79a179d5a@rwthex-w1-b.rwth-ad.de>
 <0cf90ebe86e0461f82cb22b2a6b6ea83@rwthex-s1-b.rwth-ad.de>
Message-ID: <87h9df99az.fsf@gmail.com>
To: linux-arm-kernel@lists.infradead.org
List-Id: linux-arm-kernel.lists.infradead.org

> OK, done. Can I always use the default value in this case? If yes, can
> you point me to a proper documentation of these?

Just google for "i.MX6Q Reference Manual", it's chapter 36 ("IOMUXC"),
or to be more specific, it at 36.4.316.



It's nice that Freescale/NXP is way better here than Marvell. You can
download this stuff without any problem.

When Marvell bought the PXA stuff from Intel and put everything under
NDA / download after approvement, I was hugely p.... off. I never
touched any Marvell chip after it :-)