[GIT PULL v2] Renesas ARM-based SoC for v3.8 #2

[GIT PULL v2] Renesas ARM-based SoC for v3.8 #2

[Simon Horman]

Hi Olof, Hi Arnd,

please consider the following SoC enhancements for 3.8.

* This series is based on the renesas/soc branch of the arm-soc tree.
  There will be a subquent 'SoC2' pull request which is based on this
  pull-request and a pull-request for boards.

----------------------------------------------------------------
The following changes since commit 86bc52ef4373be64867b56f3a9e30cbabf64e0dd:

  ARM: shmobile: r8a7740: Enable PMU (2012-11-06 13:47:24 +0900)

are available in the git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas.git soc

for you to fetch changes up to 2944628607f76e4755660cd710f22a4748ef88d8:

  ARM: shmobile: add fsi external clock sh7372 (2012-11-08 15:22:06 +0900)

----------------------------------------------------------------
Kuninori Morimoto (10):
      ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx
      ARM: shmobile: r8a7740: add USB24 clock explain
      ARM: shmobile: r8a7779: add USB EHCI clock support
      ARM: shmobile: r8a7779: add USB OHCI clock support
      sh: clkfwk: add sh_clk_fsidiv_register()
      ARM: shmobile: sh7372: sh7372_fsidivX_clk become non-global
      ARM: shmobile: sh7372: use sh_clk_fsidiv_register() for FSI-DIV clocks
      ARM: shmobile: r8a7740: add FSI-DVI clocks
      ARM: shmobile: add fsi external clock on r8a7740
      ARM: shmobile: add fsi external clock sh7372

 arch/arm/mach-shmobile/board-ap4evb.c         |    2 +-
 arch/arm/mach-shmobile/board-mackerel.c       |    2 +-
 arch/arm/mach-shmobile/clock-r8a7740.c        |   34 +++++++++
 arch/arm/mach-shmobile/clock-r8a7779.c        |    7 ++
 arch/arm/mach-shmobile/clock-sh7372.c         |   94 ++++---------------------
 arch/arm/mach-shmobile/include/mach/r8a7779.h |    2 +-
 arch/arm/mach-shmobile/include/mach/sh7372.h  |    2 -
 arch/arm/mach-shmobile/pfc-r8a7779.c          |   16 ++---
 drivers/sh/clk/cpg.c                          |   86 ++++++++++++++++++++++
 include/linux/sh_clk.h                        |    9 +++
 10 files changed, 159 insertions(+), 95 deletions(-)

[PATCH 01/10] ARM: shmobile: r8a7779: PFC rename PENCx -> USB_PENCx

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

PENCx is Power Enable Control pin for USB.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/include/mach/r8a7779.h |    2 +-
 arch/arm/mach-shmobile/pfc-r8a7779.c          |   16 ++++++++--------
 2 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/arch/arm/mach-shmobile/include/mach/r8a7779.h b/arch/arm/mach-shmobile/include/mach/r8a7779.h
index 499f52d..8ab0cd6 100644
--- a/arch/arm/mach-shmobile/include/mach/r8a7779.h
+++ b/arch/arm/mach-shmobile/include/mach/r8a7779.h
@@ -71,7 +71,7 @@ enum {
 	GPIO_FN_A19,
 
 	/* IPSR0 */
-	GPIO_FN_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0,
+	GPIO_FN_USB_PENC2, GPIO_FN_SCK0, GPIO_FN_PWM1, GPIO_FN_PWMFSW0,
 	GPIO_FN_SCIF_CLK, GPIO_FN_TCLK0_C, GPIO_FN_BS, GPIO_FN_SD1_DAT2,
 	GPIO_FN_MMC0_D2, GPIO_FN_FD2, GPIO_FN_ATADIR0, GPIO_FN_SDSELF,
 	GPIO_FN_HCTS1, GPIO_FN_TX4_C, GPIO_FN_A0, GPIO_FN_SD1_DAT3,
diff --git a/arch/arm/mach-shmobile/pfc-r8a7779.c b/arch/arm/mach-shmobile/pfc-r8a7779.c
index cbc26ba..9513234 100644
--- a/arch/arm/mach-shmobile/pfc-r8a7779.c
+++ b/arch/arm/mach-shmobile/pfc-r8a7779.c
@@ -140,7 +140,7 @@ enum {
 	FN_IP7_3_2, FN_IP7_6_4, FN_IP7_9_7, FN_IP7_12_10,
 	FN_IP7_14_13, FN_IP2_7_4, FN_IP2_11_8, FN_IP2_15_12,
 	FN_IP1_28_25, FN_IP2_3_0, FN_IP8_3_0, FN_IP8_7_4,
-	FN_IP8_11_8, FN_IP8_15_12, FN_PENC0, FN_PENC1,
+	FN_IP8_11_8, FN_IP8_15_12, FN_USB_PENC0, FN_USB_PENC1,
 	FN_IP0_2_0, FN_IP8_17_16, FN_IP8_18, FN_IP8_19,
 
 	/* GPSR5 */
@@ -176,7 +176,7 @@ enum {
 	FN_A0, FN_SD1_DAT3, FN_MMC0_D3, FN_FD3,
 	FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2,
 	FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C,
-	FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
+	FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
 	FN_SCIF_CLK, FN_TCLK0_C,
 
 	/* IPSR1 */
@@ -447,7 +447,7 @@ enum {
 	A0_MARK, SD1_DAT3_MARK, MMC0_D3_MARK, FD3_MARK,
 	BS_MARK, SD1_DAT2_MARK, MMC0_D2_MARK, FD2_MARK,
 	ATADIR0_MARK, SDSELF_MARK, HCTS1_MARK, TX4_C_MARK,
-	PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK,
+	USB_PENC2_MARK, SCK0_MARK, PWM1_MARK, PWMFSW0_MARK,
 	SCIF_CLK_MARK, TCLK0_C_MARK,
 
 	EX_CS0_MARK, RX3_C_IRDA_RX_C_MARK, MMC0_D6_MARK,
@@ -658,7 +658,7 @@ static pinmux_enum_t pinmux_data[] = {
 	PINMUX_DATA(A18_MARK, FN_A18),
 	PINMUX_DATA(A19_MARK, FN_A19),
 
-	PINMUX_IPSR_DATA(IP0_2_0, PENC2),
+	PINMUX_IPSR_DATA(IP0_2_0, USB_PENC2),
 	PINMUX_IPSR_MODSEL_DATA(IP0_2_0, SCK0, SEL_SCIF0_0),
 	PINMUX_IPSR_DATA(IP0_2_0, PWM1),
 	PINMUX_IPSR_MODSEL_DATA(IP0_2_0, PWMFSW0, SEL_PWMFSW_0),
@@ -1456,7 +1456,7 @@ static struct pinmux_gpio pinmux_gpios[] = {
 	GPIO_FN(A19),
 
 	/* IPSR0 */
-	GPIO_FN(PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0),
+	GPIO_FN(USB_PENC2), GPIO_FN(SCK0), GPIO_FN(PWM1), GPIO_FN(PWMFSW0),
 	GPIO_FN(SCIF_CLK), GPIO_FN(TCLK0_C), GPIO_FN(BS), GPIO_FN(SD1_DAT2),
 	GPIO_FN(MMC0_D2), GPIO_FN(FD2), GPIO_FN(ATADIR0), GPIO_FN(SDSELF),
 	GPIO_FN(HCTS1), GPIO_FN(TX4_C), GPIO_FN(A0), GPIO_FN(SD1_DAT3),
@@ -1865,8 +1865,8 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 		GP_4_30_FN, FN_IP8_18,
 		GP_4_29_FN, FN_IP8_17_16,
 		GP_4_28_FN, FN_IP0_2_0,
-		GP_4_27_FN, FN_PENC1,
-		GP_4_26_FN, FN_PENC0,
+		GP_4_27_FN, FN_USB_PENC1,
+		GP_4_26_FN, FN_USB_PENC0,
 		GP_4_25_FN, FN_IP8_15_12,
 		GP_4_24_FN, FN_IP8_11_8,
 		GP_4_23_FN, FN_IP8_7_4,
@@ -1981,7 +1981,7 @@ static struct pinmux_cfg_reg pinmux_config_regs[] = {
 		FN_BS, FN_SD1_DAT2, FN_MMC0_D2, FN_FD2,
 		FN_ATADIR0, FN_SDSELF, FN_HCTS1, FN_TX4_C,
 		/* IP0_2_0 [3] */
-		FN_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
+		FN_USB_PENC2, FN_SCK0, FN_PWM1, FN_PWMFSW0,
 		FN_SCIF_CLK, FN_TCLK0_C, 0, 0 }
 	},
 	{ PINMUX_CFG_REG_VAR("IPSR1", 0xfffc0024, 32,
-- 
1.7.10.4

[PATCH 02/10] ARM: shmobile: r8a7740: add USB24 clock explain

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

USBCKCR is controlling USB parent clock and divide rate.
This parent clock is used as a "usb24s" from other devices,
but the "divide rate" is not used.
Further, this clock itself is known as "usb24".
So, to set this clock is a little confusable.
This patch adds quick explain and sample settings for this clock.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7740.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index 6729e00..c012bbf 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -188,6 +188,22 @@ static struct clk pllc1_div2_clk = {
 };
 
 /* USB clock */
+/*
+ * USBCKCR is controlling usb24 clock
+ * bit[7] : parent clock
+ * bit[6] : clock divide rate
+ * And this bit[7] is used as a "usb24s" from other devices.
+ * (Video clock / Sub clock / SPU clock)
+ * You can controll this clock as a below.
+ *
+ * struct clk *usb24	= clk_get(dev,  "usb24");
+ * struct clk *usb24s	= clk_get(NULL, "usb24s");
+ * struct clk *system	= clk_get(NULL, "system_clk");
+ * int rate = clk_get_rate(system);
+ *
+ * clk_set_parent(usb24s, system);  // for bit[7]
+ * clk_set_rate(usb24, rate / 2);   // for bit[6]
+ */
 static struct clk *usb24s_parents[] = {
 	[0] = &system_clk,
 	[1] = &extal2_clk
-- 
1.7.10.4

[PATCH 03/10] ARM: shmobile: r8a7779: add USB EHCI clock support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

ehci-platform driver require these clocks

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c |    5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 24f5a84..4ba4e3c 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -87,6 +87,7 @@ static struct clk div4_clks[DIV4_NR] = {
 };
 
 enum { MSTP323, MSTP322, MSTP321, MSTP320,
+	MSTP101, MSTP100,
 	MSTP030,
 	MSTP029, MSTP028, MSTP027, MSTP026, MSTP025, MSTP024, MSTP023, MSTP022, MSTP021,
 	MSTP016, MSTP015, MSTP014,
@@ -98,6 +99,8 @@ static struct clk mstp_clks[MSTP_NR] = {
 	[MSTP322] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 22, 0), /* SDHI1 */
 	[MSTP321] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 21, 0), /* SDHI2 */
 	[MSTP320] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR3, 20, 0), /* SDHI3 */
+	[MSTP101] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1,  1, 0), /* USB2 */
+	[MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR1,  0, 0), /* USB0/1 */
 	[MSTP030] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 30, 0), /* I2C0 */
 	[MSTP029] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 29, 0), /* I2C1 */
 	[MSTP028] = SH_CLK_MSTP32(&div4_clks[DIV4_P], MSTPCR0, 28, 0), /* I2C2 */
@@ -153,6 +156,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("peripheral_clk",	&div4_clks[DIV4_P]),
 
 	/* MSTP32 clocks */
+	CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */
+	CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
-- 
1.7.10.4

[PATCH 04/10] ARM: shmobile: r8a7779: add USB OHCI clock support

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

ohci-platform driver require these clocks

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7779.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
index 4ba4e3c..be885cf 100644
--- a/arch/arm/mach-shmobile/clock-r8a7779.c
+++ b/arch/arm/mach-shmobile/clock-r8a7779.c
@@ -157,7 +157,9 @@ static struct clk_lookup lookups[] = {
 
 	/* MSTP32 clocks */
 	CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */
+	CLKDEV_DEV_ID("ohci-platform.1", &mstp_clks[MSTP101]), /* USB OHCI port2 */
 	CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
+	CLKDEV_DEV_ID("ohci-platform.0", &mstp_clks[MSTP100]), /* USB OHCI port0/1 */
 	CLKDEV_DEV_ID("sh_tmu.0", &mstp_clks[MSTP016]), /* TMU00 */
 	CLKDEV_DEV_ID("sh_tmu.1", &mstp_clks[MSTP016]), /* TMU01 */
 	CLKDEV_DEV_ID("i2c-rcar.0", &mstp_clks[MSTP030]), /* I2C0 */
-- 
1.7.10.4

[PATCH 05/10] sh: clkfwk: add sh_clk_fsidiv_register()

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

This patch adds sh_clk_fsidiv_register() to share FSI-DIV clock code

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 drivers/sh/clk/cpg.c   |   86 ++++++++++++++++++++++++++++++++++++++++++++++++
 include/linux/sh_clk.h |    9 +++++
 2 files changed, 95 insertions(+)

diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
index 07e9fb4..b3dc441 100644
--- a/drivers/sh/clk/cpg.c
+++ b/drivers/sh/clk/cpg.c
@@ -361,3 +361,89 @@ int __init sh_clk_div4_reparent_register(struct clk *clks, int nr,
 	return sh_clk_div_register_ops(clks, nr, table,
 				       &sh_clk_div4_reparent_clk_ops);
 }
+
+/* FSI-DIV */
+static unsigned long fsidiv_recalc(struct clk *clk)
+{
+	u32 value;
+
+	value = __raw_readl(clk->mapping->base);
+
+	value >>= 16;
+	if (value < 2)
+		return clk->parent->rate;
+
+	return clk->parent->rate / value;
+}
+
+static long fsidiv_round_rate(struct clk *clk, unsigned long rate)
+{
+	return clk_rate_div_range_round(clk, 1, 0xffff, rate);
+}
+
+static void fsidiv_disable(struct clk *clk)
+{
+	__raw_writel(0, clk->mapping->base);
+}
+
+static int fsidiv_enable(struct clk *clk)
+{
+	u32 value;
+
+	value  = __raw_readl(clk->mapping->base) >> 16;
+	if (value < 2)
+		return 0;
+
+	__raw_writel((value << 16) | 0x3, clk->mapping->base);
+
+	return 0;
+}
+
+static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
+{
+	u32 val;
+	int idx;
+
+	idx = (clk->parent->rate / rate) & 0xffff;
+	if (idx < 2)
+		__raw_writel(0, clk->mapping->base);
+	else
+		__raw_writel(idx << 16, clk->mapping->base);
+
+	return 0;
+}
+
+static struct sh_clk_ops fsidiv_clk_ops = {
+	.recalc		= fsidiv_recalc,
+	.round_rate	= fsidiv_round_rate,
+	.set_rate	= fsidiv_set_rate,
+	.enable		= fsidiv_enable,
+	.disable	= fsidiv_disable,
+};
+
+int __init sh_clk_fsidiv_register(struct clk *clks, int nr)
+{
+	struct clk_mapping *map;
+	int i;
+
+	for (i = 0; i < nr; i++) {
+
+		map = kzalloc(sizeof(struct clk_mapping), GFP_KERNEL);
+		if (!map) {
+			pr_err("%s: unable to alloc memory\n", __func__);
+			return -ENOMEM;
+		}
+
+		/* clks[i].enable_reg came from SH_CLK_FSIDIV() */
+		map->phys		= (phys_addr_t)clks[i].enable_reg;
+		map->len		= 8;
+
+		clks[i].enable_reg	= 0; /* remove .enable_reg */
+		clks[i].ops		= &fsidiv_clk_ops;
+		clks[i].mapping		= map;
+
+		clk_register(&clks[i]);
+	}
+
+	return 0;
+}
diff --git a/include/linux/sh_clk.h b/include/linux/sh_clk.h
index 5091091..60c7239 100644
--- a/include/linux/sh_clk.h
+++ b/include/linux/sh_clk.h
@@ -199,4 +199,13 @@ int sh_clk_div6_reparent_register(struct clk *clks, int nr);
 #define CLKDEV_DEV_ID(_id, _clk) { .dev_id = _id, .clk = _clk }
 #define CLKDEV_ICK_ID(_cid, _did, _clk) { .con_id = _cid, .dev_id = _did, .clk = _clk }
 
+/* .enable_reg will be updated to .mapping on sh_clk_fsidiv_register() */
+#define SH_CLK_FSIDIV(_reg, _parent)		\
+{						\
+	.enable_reg = (void __iomem *)_reg,	\
+	.parent		= _parent,		\
+}
+
+int sh_clk_fsidiv_register(struct clk *clks, int nr);
+
 #endif /* __SH_CLOCK_H */
-- 
1.7.10.4

[PATCH 06/10] ARM: shmobile: sh7372: sh7372_fsidivX_clk become non-global

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Not only sh7372 but also many Renesas chip has FSI-DIV clock,
and we can share its sh_clk_ops.
To support common FSI-DIV clock, sh7372_fsidivX_clk
becomes non-global by this patch.
This is preparation for FSI DT support.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/board-ap4evb.c        |    2 +-
 arch/arm/mach-shmobile/board-mackerel.c      |    2 +-
 arch/arm/mach-shmobile/clock-sh7372.c        |   10 ++++++----
 arch/arm/mach-shmobile/include/mach/sh7372.h |    2 --
 4 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/arch/arm/mach-shmobile/board-ap4evb.c b/arch/arm/mach-shmobile/board-ap4evb.c
index 790dc68..cefdd03 100644
--- a/arch/arm/mach-shmobile/board-ap4evb.c
+++ b/arch/arm/mach-shmobile/board-ap4evb.c
@@ -728,7 +728,7 @@ fsia_ick_out:
 static int fsi_hdmi_set_rate(struct device *dev, int rate, int enable)
 {
 	struct clk *fsib_clk;
-	struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+	struct clk *fdiv_clk = clk_get(NULL, "fsidivb");
 	long fsib_rate = 0;
 	long fdiv_rate = 0;
 	int ackmd_bpfmd;
diff --git a/arch/arm/mach-shmobile/board-mackerel.c b/arch/arm/mach-shmobile/board-mackerel.c
index 0c27c81..c826d77 100644
--- a/arch/arm/mach-shmobile/board-mackerel.c
+++ b/arch/arm/mach-shmobile/board-mackerel.c
@@ -882,7 +882,7 @@ static int __fsi_set_round_rate(struct clk *clk, long rate, int enable)
 static int fsi_b_set_rate(struct device *dev, int rate, int enable)
 {
 	struct clk *fsib_clk;
-	struct clk *fdiv_clk = &sh7372_fsidivb_clk;
+	struct clk *fdiv_clk = clk_get(NULL, "fsidivb");
 	long fsib_rate = 0;
 	long fdiv_rate = 0;
 	int ackmd_bpfmd;
diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 430a90f..18dcff7 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -481,7 +481,7 @@ static struct clk_mapping fsidiva_clk_mapping = {
 	.len	= 8,
 };
 
-struct clk sh7372_fsidiva_clk = {
+static struct clk fsidiva_clk = {
 	.ops		= &fsidiv_clk_ops,
 	.parent		= &div6_reparent_clks[DIV6_FSIA], /* late install */
 	.mapping	= &fsidiva_clk_mapping,
@@ -492,15 +492,15 @@ static struct clk_mapping fsidivb_clk_mapping = {
 	.len	= 8,
 };
 
-struct clk sh7372_fsidivb_clk = {
+static struct clk fsidivb_clk = {
 	.ops		= &fsidiv_clk_ops,
 	.parent		= &div6_reparent_clks[DIV6_FSIB],  /* late install */
 	.mapping	= &fsidivb_clk_mapping,
 };
 
 static struct clk *late_main_clks[] = {
-	&sh7372_fsidiva_clk,
-	&sh7372_fsidivb_clk,
+	&fsidiva_clk,
+	&fsidivb_clk,
 };
 
 enum { MSTP001, MSTP000,
@@ -583,6 +583,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
 	CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
 	CLKDEV_CON_ID("pllc2_clk", &sh7372_pllc2_clk),
+	CLKDEV_CON_ID("fsidiva", &fsidiva_clk),
+	CLKDEV_CON_ID("fsidivb", &fsidivb_clk),
 
 	/* DIV4 clocks */
 	CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
diff --git a/arch/arm/mach-shmobile/include/mach/sh7372.h b/arch/arm/mach-shmobile/include/mach/sh7372.h
index d65fbbe..26cd101 100644
--- a/arch/arm/mach-shmobile/include/mach/sh7372.h
+++ b/arch/arm/mach-shmobile/include/mach/sh7372.h
@@ -479,8 +479,6 @@ extern struct clk sh7372_dv_clki_div2_clk;
 extern struct clk sh7372_pllc2_clk;
 extern struct clk sh7372_fsiack_clk;
 extern struct clk sh7372_fsibck_clk;
-extern struct clk sh7372_fsidiva_clk;
-extern struct clk sh7372_fsidivb_clk;
 
 extern void sh7372_intcs_suspend(void);
 extern void sh7372_intcs_resume(void);
-- 
1.7.10.4

[PATCH 07/10] ARM: shmobile: sh7372: use sh_clk_fsidiv_register() for FSI-DIV clocks

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Now, sh7372 can use sh_clk_fsidiv_register() for FSI-DIV clocks.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-sh7372.c |   94 ++++-----------------------------
 1 file changed, 10 insertions(+), 84 deletions(-)

diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index 18dcff7..bee2d05 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -420,87 +420,11 @@ static struct clk div6_reparent_clks[DIV6_REPARENT_NR] = {
 };
 
 /* FSI DIV */
-static unsigned long fsidiv_recalc(struct clk *clk)
-{
-	unsigned long value;
-
-	value = __raw_readl(clk->mapping->base);
-
-	value >>= 16;
-	if (value < 2)
-		return 0;
-
-	return clk->parent->rate / value;
-}
-
-static long fsidiv_round_rate(struct clk *clk, unsigned long rate)
-{
-	return clk_rate_div_range_round(clk, 2, 0xffff, rate);
-}
-
-static void fsidiv_disable(struct clk *clk)
-{
-	__raw_writel(0, clk->mapping->base);
-}
-
-static int fsidiv_enable(struct clk *clk)
-{
-	unsigned long value;
-
-	value  = __raw_readl(clk->mapping->base) >> 16;
-	if (value < 2)
-		return -EIO;
-
-	__raw_writel((value << 16) | 0x3, clk->mapping->base);
-
-	return 0;
-}
+enum { FSIDIV_A, FSIDIV_B, FSIDIV_REPARENT_NR };
 
-static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
-{
-	int idx;
-
-	idx = (clk->parent->rate / rate) & 0xffff;
-	if (idx < 2)
-		return -EINVAL;
-
-	__raw_writel(idx << 16, clk->mapping->base);
-	return 0;
-}
-
-static struct sh_clk_ops fsidiv_clk_ops = {
-	.recalc		= fsidiv_recalc,
-	.round_rate	= fsidiv_round_rate,
-	.set_rate	= fsidiv_set_rate,
-	.enable		= fsidiv_enable,
-	.disable	= fsidiv_disable,
-};
-
-static struct clk_mapping fsidiva_clk_mapping = {
-	.phys	= FSIDIVA,
-	.len	= 8,
-};
-
-static struct clk fsidiva_clk = {
-	.ops		= &fsidiv_clk_ops,
-	.parent		= &div6_reparent_clks[DIV6_FSIA], /* late install */
-	.mapping	= &fsidiva_clk_mapping,
-};
-
-static struct clk_mapping fsidivb_clk_mapping = {
-	.phys	= FSIDIVB,
-	.len	= 8,
-};
-
-static struct clk fsidivb_clk = {
-	.ops		= &fsidiv_clk_ops,
-	.parent		= &div6_reparent_clks[DIV6_FSIB],  /* late install */
-	.mapping	= &fsidivb_clk_mapping,
-};
-
-static struct clk *late_main_clks[] = {
-	&fsidiva_clk,
-	&fsidivb_clk,
+static struct clk fsidivs[] = {
+	[FSIDIV_A] = SH_CLK_FSIDIV(FSIDIVA, &div6_reparent_clks[DIV6_FSIA]),
+	[FSIDIV_B] = SH_CLK_FSIDIV(FSIDIVB, &div6_reparent_clks[DIV6_FSIB]),
 };
 
 enum { MSTP001, MSTP000,
@@ -583,8 +507,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_CON_ID("pllc1_clk", &pllc1_clk),
 	CLKDEV_CON_ID("pllc1_div2_clk", &pllc1_div2_clk),
 	CLKDEV_CON_ID("pllc2_clk", &sh7372_pllc2_clk),
-	CLKDEV_CON_ID("fsidiva", &fsidiva_clk),
-	CLKDEV_CON_ID("fsidivb", &fsidivb_clk),
+	CLKDEV_CON_ID("fsidiva", &fsidivs[FSIDIV_A]),
+	CLKDEV_CON_ID("fsidivb", &fsidivs[FSIDIV_B]),
 
 	/* DIV4 clocks */
 	CLKDEV_CON_ID("i_clk", &div4_clks[DIV4_I]),
@@ -680,6 +604,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("icka", "sh_fsi2", &div6_reparent_clks[DIV6_FSIA]),
 	CLKDEV_ICK_ID("ickb", "sh_fsi2", &div6_reparent_clks[DIV6_FSIB]),
 	CLKDEV_ICK_ID("spu2", "sh_fsi2", &mstp_clks[MSTP223]),
+	CLKDEV_ICK_ID("diva", "sh_fsi2", &fsidivs[FSIDIV_A]),
+	CLKDEV_ICK_ID("divb", "sh_fsi2", &fsidivs[FSIDIV_B]),
 };
 
 void __init sh7372_clock_init(void)
@@ -708,8 +634,8 @@ void __init sh7372_clock_init(void)
 	if (!ret)
 		ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
 
-	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
-		ret = clk_register(late_main_clks[k]);
+	if (!ret)
+		ret = sh_clk_fsidiv_register(fsidivs, FSIDIV_REPARENT_NR);
 
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
-- 
1.7.10.4

[PATCH 08/10] ARM: shmobile: r8a7740: add FSI-DVI clocks

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7740.c |   16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index c012bbf..eb5dfee 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -65,6 +65,9 @@
 #define SMSTPCR3	IOMEM(0xe615013c)
 #define SMSTPCR4	IOMEM(0xe6150140)
 
+#define FSIDIVA		IOMEM(0xFE1F8000)
+#define FSIDIVB		IOMEM(0xFE1F8008)
+
 /* Fixed 32 KHz root clock from EXTALR pin */
 static struct clk extalr_clk = {
 	.rate	= 32768,
@@ -443,6 +446,14 @@ static struct clk *late_main_clks[] = {
 	&hdmi2_clk,
 };
 
+/* FSI DIV */
+enum { FSIDIV_A, FSIDIV_B, FSIDIV_REPARENT_NR };
+
+static struct clk fsidivs[] = {
+	[FSIDIV_A] = SH_CLK_FSIDIV(FSIDIVA, &div6_reparent_clks[DIV6_FSIA]),
+	[FSIDIV_B] = SH_CLK_FSIDIV(FSIDIVB, &div6_reparent_clks[DIV6_FSIB]),
+};
+
 /* MSTP */
 enum {
 	DIV4_I, DIV4_ZG, DIV4_B, DIV4_M1, DIV4_HP,
@@ -612,6 +623,8 @@ static struct clk_lookup lookups[] = {
 
 	CLKDEV_ICK_ID("icka", "sh_fsi2",	&div6_reparent_clks[DIV6_FSIA]),
 	CLKDEV_ICK_ID("ickb", "sh_fsi2",	&div6_reparent_clks[DIV6_FSIB]),
+	CLKDEV_ICK_ID("diva", "sh_fsi2",	&fsidivs[FSIDIV_A]),
+	CLKDEV_ICK_ID("divb", "sh_fsi2",	&fsidivs[FSIDIV_B]),
 };
 
 void __init r8a7740_clock_init(u8 md_ck)
@@ -657,6 +670,9 @@ void __init r8a7740_clock_init(u8 md_ck)
 	for (k = 0; !ret && (k < ARRAY_SIZE(late_main_clks)); k++)
 		ret = clk_register(late_main_clks[k]);
 
+	if (!ret)
+		ret = sh_clk_fsidiv_register(fsidivs, FSIDIV_REPARENT_NR);
+
 	clkdev_add_table(lookups, ARRAY_SIZE(lookups));
 
 	if (!ret)
-- 
1.7.10.4

[PATCH 09/10] ARM: shmobile: add fsi external clock on r8a7740

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

xcka/xckb were required from FSI driver

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-r8a7740.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c
index eb5dfee..eac49d5 100644
--- a/arch/arm/mach-shmobile/clock-r8a7740.c
+++ b/arch/arm/mach-shmobile/clock-r8a7740.c
@@ -625,6 +625,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("ickb", "sh_fsi2",	&div6_reparent_clks[DIV6_FSIB]),
 	CLKDEV_ICK_ID("diva", "sh_fsi2",	&fsidivs[FSIDIV_A]),
 	CLKDEV_ICK_ID("divb", "sh_fsi2",	&fsidivs[FSIDIV_B]),
+	CLKDEV_ICK_ID("xcka", "sh_fsi2",	&fsiack_clk),
+	CLKDEV_ICK_ID("xckb", "sh_fsi2",	&fsibck_clk),
 };
 
 void __init r8a7740_clock_init(u8 md_ck)
-- 
1.7.10.4

[PATCH 10/10] ARM: shmobile: add fsi external clock sh7372

[Simon Horman]

From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>

xcka/xckb were required from FSI driver

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Simon Horman <horms@verge.net.au>
---
 arch/arm/mach-shmobile/clock-sh7372.c |    2 ++
 1 file changed, 2 insertions(+)

diff --git a/arch/arm/mach-shmobile/clock-sh7372.c b/arch/arm/mach-shmobile/clock-sh7372.c
index bee2d05..4d57e34 100644
--- a/arch/arm/mach-shmobile/clock-sh7372.c
+++ b/arch/arm/mach-shmobile/clock-sh7372.c
@@ -606,6 +606,8 @@ static struct clk_lookup lookups[] = {
 	CLKDEV_ICK_ID("spu2", "sh_fsi2", &mstp_clks[MSTP223]),
 	CLKDEV_ICK_ID("diva", "sh_fsi2", &fsidivs[FSIDIV_A]),
 	CLKDEV_ICK_ID("divb", "sh_fsi2", &fsidivs[FSIDIV_B]),
+	CLKDEV_ICK_ID("xcka", "sh_fsi2", &sh7372_fsiack_clk),
+	CLKDEV_ICK_ID("xckb", "sh_fsi2", &sh7372_fsibck_clk),
 };
 
 void __init sh7372_clock_init(void)
-- 
1.7.10.4

[GIT PULL v2] Renesas ARM-based SoC for v3.8 #2

[Arnd Bergmann]

On Friday 09 November 2012, Simon Horman wrote:
> Hi Olof, Hi Arnd,
> 
> please consider the following SoC enhancements for 3.8.
> 
> * This series is based on the renesas/soc branch of the arm-soc tree.
>   There will be a subquent 'SoC2' pull request which is based on this
>   pull-request and a pull-request for boards.

Pulled into next/soc branch on top of the earlier shmobile soc changes.

Thanks,

	Arnd

[PATCH 05/10] sh: clkfwk: add sh_clk_fsidiv_register()

[Arnd Bergmann]

On Friday 09 November 2012, Simon Horman wrote:
> +
> +static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
> +{
> +       u32 val;
> +       int idx;
> +
> +       idx = (clk->parent->rate / rate) & 0xffff;
> +       if (idx < 2)
> +               __raw_writel(0, clk->mapping->base);
> +       else
> +               __raw_writel(idx << 16, clk->mapping->base);
> +
> +       return 0;
> +}

This gives me a new warning about an unused variable "val" now.

	Arnd

[PATCH] sh: clkfwk: fixup unsed variable warning

[Kuninori Morimoto]

This patch solves above warning

${LINUX}/drivers/sh/clk/cpg.c:404:6: warning: \
unused variable 'val' [-Wunused-variable]

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
---
>> Arnd, Simon

Sorry, it is my fault

 drivers/sh/clk/cpg.c |    1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/sh/clk/cpg.c b/drivers/sh/clk/cpg.c
index b3dc441..5aedcdf 100644
--- a/drivers/sh/clk/cpg.c
+++ b/drivers/sh/clk/cpg.c
@@ -401,7 +401,6 @@ static int fsidiv_enable(struct clk *clk)
 
 static int fsidiv_set_rate(struct clk *clk, unsigned long rate)
 {
-	u32 val;
 	int idx;
 
 	idx = (clk->parent->rate / rate) & 0xffff;
-- 
1.7.9.5

[PATCH 03/10] ARM: shmobile: r8a7779: add USB EHCI clock support

[Sergei Shtylyov]

Hello.

On 11/09/2012 10:29 AM, Simon Horman wrote:

> From: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
>
> ehci-platform driver require these clocks
>
> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
> Signed-off-by: Simon Horman <horms@verge.net.au>
> ---
>   arch/arm/mach-shmobile/clock-r8a7779.c |    5 +++++
>   1 file changed, 5 insertions(+)
>
> diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c
> index 24f5a84..4ba4e3c 100644
> --- a/arch/arm/mach-shmobile/clock-r8a7779.c
> +++ b/arch/arm/mach-shmobile/clock-r8a7779.c
[...]
> @@ -153,6 +156,8 @@ static struct clk_lookup lookups[] = {
>   	CLKDEV_CON_ID("peripheral_clk",	&div4_clks[DIV4_P]),
>   
>   	/* MSTP32 clocks */
> +	CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */
> +	CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */

    But how are those used? I don't see clk API support in ehci-platform.c.
Are they used via runtime PM? I'm just not familiar enough with it...

WBR, Sergei

[PATCH 03/10] ARM: shmobile: r8a7779: add USB EHCI clock support

[Kuninori Morimoto]

Hi Sergei

> >   	/* MSTP32 clocks */
> > +	CLKDEV_DEV_ID("ehci-platform.1", &mstp_clks[MSTP101]), /* USB EHCI port2 */
> > +	CLKDEV_DEV_ID("ehci-platform.0", &mstp_clks[MSTP100]), /* USB EHCI port0/1 */
> 
>     But how are those used? I don't see clk API support in ehci-platform.c.
> Are they used via runtime PM? I'm just not familiar enough with it...

Yes exactry

    - board-marzen.c :: usb_power_on()
    - clock-r8a7779.c :: mstp_clks[]

Best regards
---
Kuninori Morimoto