From: gregory.clement@free-electrons.com (Gregory CLEMENT)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 3/6] gpio: dt-bindings: Add documentation for gpio controllers on Armada 7K/8K
Date: Wed, 31 May 2017 12:02:59 +0200 [thread overview]
Message-ID: <87k24xtkbw.fsf@free-electrons.com> (raw)
In-Reply-To: <20170530222358.abta3srv5emz7wtp@rob-hp-laptop> (Rob Herring's message of "Tue, 30 May 2017 17:23:58 -0500")
Hi Rob,
On mer., mai 31 2017, Rob Herring <robh@kernel.org> wrote:
> On Mon, May 29, 2017 at 10:08:16AM +0200, Linus Walleij wrote:
>> On Tue, May 23, 2017 at 3:06 PM, Gregory CLEMENT
>> <gregory.clement@free-electrons.com> wrote:
>> > On mar., mai 23 2017, Linus Walleij <linus.walleij@linaro.org> wrote:
>>
>> >> Please rebase and resend the rest of the patches.
>> >
>> > Actually I was wrong with my assumption that there was no dependency.
>> > For the binding documentation there is dependecy accross the series I
>> > sent.
>> >
>> > This patch depends on "pinctrl: dt-bindings: add documentation for AP806
>> > pin controllers" [1] and "pinctrl: dt-bindings: add documentation for
>> > CP110 pin controllers" [3] from the series "Add support for the pin
>> > controllers on the Marvell Armada 7K/8K".
>> >
>> > As you are maintainer of both gpio and pinctrl subsystem it will be easy
>> > to resolv.
>>
>> Please send all patches in one big series in that case, so I can apply
>> them all to a branch and merge that branch into both trees.
>>
>> > But these last patches depend also on "clk: mvebu: ap806: introduce a
>> > new binding" [3] in the clock series "Improve ap806 clk support on
>> > Marvell Armada 7K/8K" and on "clk: mvebu: cp110: introduce a new
>> > binding" [4] in the clock series "Improve cp110 clk support on Marvell
>> > Armada 7K/8K".
>>
>> That sounds messy.
>>
>> > So for these particular patches, either I rebase them on the v4.12-rc2
>> > and there will be a small merge conflict during the merge window for
>> > v4.13, or we can ask a stable branch with only these few patches (I am
>> > adding the clock maintainer to this email).
>> >
>> > If we chose this last option I can split the clock patches to have patch
>> > modifying only the binding documentation.
>>
>> I think you can make a patch just modifying the binding documentation
>> and then apply that patch to *both* trees, just make sure the patch
>> is *final* and not applied in different versions in clk and pinctrl.
>
> I thought we try to avoid doing that.
>
>> I think cross-tree branches for documentation clashes is too much
>> bureaucracy.
>
> I can just take all the doc patches separately. Or you can take the
> clock one too.
If you can take all the doc patches I think we will managed to solve the
issue in a efficient way. So I am going to send a new version of the
clock series by splitting the "clk: mvebu: *: introduce a new binding"
patches so you will be able to only pick the doc part.
Thanks!
Gregory
>
>> Make sure your clock patch is finalized and preferably also applied
>> to the clk tree then put it in the bottom of the patch set you send
>> to me as well and I will proceed like above.
>>
>> Yours,
>> Linus Walleij
--
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com
next prev parent reply other threads:[~2017-05-31 10:02 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-19 16:09 [PATCH 0/6] Extend mvebu gpio driver to support the controllers of the Marvell Armada 7K/8K Gregory CLEMENT
2017-05-19 16:09 ` [PATCH 1/6] gpio: mvebu: sort header include Gregory CLEMENT
2017-05-23 9:15 ` Linus Walleij
2017-05-19 16:09 ` [PATCH 2/6] gpio: mvebu: switch to regmap for register access Gregory CLEMENT
2017-05-23 9:16 ` Linus Walleij
2017-05-19 16:09 ` [PATCH 3/6] gpio: dt-bindings: Add documentation for gpio controllers on Armada 7K/8K Gregory CLEMENT
2017-05-23 9:20 ` Linus Walleij
2017-05-23 13:06 ` Gregory CLEMENT
2017-05-29 8:08 ` Linus Walleij
2017-05-30 22:23 ` Rob Herring
2017-05-31 10:02 ` Gregory CLEMENT [this message]
2017-05-31 10:43 ` Michael Turquette
2017-05-31 14:41 ` Gregory CLEMENT
2017-05-30 22:29 ` Rob Herring
2017-05-31 10:05 ` Gregory CLEMENT
2017-06-01 17:33 ` Gregory CLEMENT
2017-05-19 16:09 ` [PATCH 4/6] gpio: mvebu: allow building driver for " Gregory CLEMENT
2017-05-23 9:21 ` Linus Walleij
2017-05-19 16:09 ` [PATCH 5/6] gpio: mvebu: Add support for the Armada 7K/8K SoCs Gregory CLEMENT
2017-05-19 16:24 ` Russell King - ARM Linux
2017-05-19 16:27 ` Russell King - ARM Linux
2017-05-19 17:05 ` Thomas Petazzoni
2017-05-19 16:09 ` [PATCH 6/6] arm64: dts: marvell: add gpio support for Armada 7K/8K Gregory CLEMENT
2017-05-31 9:16 ` [PATCH 0/6] Extend mvebu gpio driver to support the controllers of the Marvell " Thomas Petazzoni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87k24xtkbw.fsf@free-electrons.com \
--to=gregory.clement@free-electrons.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).