linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: robert.jarzmik@free.fr (Robert Jarzmik)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 1/2] mtd: nand: pxa3xx: Fix PIO FIFO draining
Date: Mon, 16 Feb 2015 22:36:02 +0100	[thread overview]
Message-ID: <87k2zha69p.fsf@free.fr> (raw)
In-Reply-To: <20150216205825.GG25269@lukather> (Maxime Ripard's message of "Mon, 16 Feb 2015 21:58:25 +0100")

Maxime Ripard <maxime.ripard@free-electrons.com> writes:

>> I don't think an mdelay(256) is acceptable.
>
> That's very true that this driver would need some love, but
> valentine's day was last week.
That doesn't cope with the 256ms mdelay. And a potential big mdelay is not what
I'd call a bug fix, see below.

> I'm sorry, but this is a patch targeted for stable. This is a pure
> bugfix. I won't rewrite the whole driver solely to make the driver
> better, especially since that would make such a patch (or more likely
> a whole serie) unsuitable for stable.

This is the rewrite I was asking for (not tested), consider it against your
"rewrite the whole driver" :

	Modified   drivers/mtd/nand/pxa3xx_nand.c
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index e512902..6e569e9 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -576,11 +576,20 @@ static void start_data_dma(struct pxa3xx_nand_info *info)
 {}
 #endif
 
+static irqreturn_t pxa3xx_nand_irq_thread(int irq, void *data)
+{
+	struct pxa3xx_nand_info *info = data;
+
+	handle_data_pio(info);
+	return IRQ_HANDLED;
+}
+
 static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
 {
 	struct pxa3xx_nand_info *info = devid;
 	unsigned int status, is_completed = 0, is_ready = 0;
 	unsigned int ready, cmd_done;
+	irqreturn_t ret = IRQ_HANDLED;
 
 	if (info->cs == 0) {
 		ready           = NDSR_FLASH_RDY;
@@ -622,7 +631,7 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
 		} else {
 			info->state = (status & NDSR_RDDREQ) ?
 				      STATE_PIO_READING : STATE_PIO_WRITING;
-			handle_data_pio(info);
+			ret = IRQ_WAKE_THREAD;
 		}
 	}
 	if (status & cmd_done) {
@@ -663,7 +672,7 @@ static irqreturn_t pxa3xx_nand_irq(int irq, void *devid)
 	if (is_ready)
 		complete(&info->dev_ready);
 NORMAL_IRQ_EXIT:
-	return IRQ_HANDLED;
+	return ret;
 }
 
 static inline int is_buf_blank(uint8_t *buf, size_t len)
@@ -1688,7 +1697,8 @@ static int alloc_nand_resource(struct platform_device *pdev)
 	/* initialize all interrupts to be disabled */
 	disable_int(info, NDSR_MASK);
 
-	ret = request_irq(irq, pxa3xx_nand_irq, 0, pdev->name, info);
+	ret = request_threaded_irq(irq, pxa3xx_nand_irq,
+				   pxa3xx_nand_irq_thread, 0, pdev->name, info);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to request IRQ\n");
 		goto fail_free_buf;

--
Robert

  reply	other threads:[~2015-02-16 21:36 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-02-16 12:51 [PATCH v3 0/2] ARM: mvebu: a385-db-ap: Enable the NAND controller Maxime Ripard
2015-02-16 12:51 ` [PATCH v3 1/2] mtd: nand: pxa3xx: Fix PIO FIFO draining Maxime Ripard
2015-02-16 13:34   ` Boris Brezillon
2015-02-16 13:35   ` Ezequiel Garcia
2015-02-16 16:49     ` Maxime Ripard
2015-02-16 16:27   ` Thomas Petazzoni
2015-02-16 16:41     ` Maxime Ripard
2015-02-16 16:57       ` Ezequiel Garcia
2015-02-17 10:29         ` Maxime Ripard
2015-02-16 20:11   ` Robert Jarzmik
2015-02-16 20:58     ` Maxime Ripard
2015-02-16 21:36       ` Robert Jarzmik [this message]
2015-02-17  9:47         ` Maxime Ripard
2015-02-17 10:37         ` Maxime Ripard
2015-02-17 17:07           ` Robert Jarzmik
2015-02-17 17:16             ` Ezequiel Garcia
2015-02-24  3:45               ` Brian Norris
2015-02-24  8:17                 ` Maxime Ripard
2015-02-16 12:51 ` [PATCH v3 2/2] ARM: mvebu: a385-db-ap: Enable the NAND Maxime Ripard

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=87k2zha69p.fsf@free.fr \
    --to=robert.jarzmik@free.fr \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).