[RFC] ARM: OMAP: hwmod: wait for sysreset complete after enabling hwmod

[khilman@deeprootsystems.com (Kevin Hilman)]

Shubhrajyoti Datta <omaplinuxkernel@gmail.com> writes:

> On Tue, Oct 23, 2012 at 3:16 AM, Kevin Hilman
> <khilman@deeprootsystems.com> wrote:
>> Tero Kristo <t-kristo@ti.com> writes:
>>
>>> When waking up from off-mode, some IP blocks are reset automatically by
>>> hardware. For this reason, software must wait until the reset has
>>> completed before attempting to access the IP block.
>>>
>>> This patch fixes for example the bug introduced by commit
>>> 6c31b2150ff96755d24e0ab6d6fea08a7bf5c44c ("mmc: omap_hsmmc: remove access
>>> to SYSCONFIG register"), in which the MMC IP block is reset during
>>> off-mode entry, but the code expects the module to be already available
>>> during the execution of context restore.
>>>
>>> Signed-off-by: Tero Kristo <t-kristo@ti.com>
>>> Cc: Paul Walmsley <paul@pwsan.com>
>>> Cc: Benoit Cousson <b-cousson@ti.com>
>>> Cc: Venkatraman S <svenkatr@ti.com>
>>
>> I can confirm that this patch the regression in my OMAP3 PM tests where
>> suspend test (to retention or off) failed if ran after the off-idle
>> test.
>>
>> Tested-by: Kevin Hilman <khilman@ti.com>
>>
>> on 3530/Overo, 3730/OveroSTORM, 3730/Beagle-xM
>
> on 3630/Beagle works.
> However on 3430 on idle path didnot work.
> let me know if i am missing some thing.

Could you please explain what worked and didn't work on each platforms?

Also, which 3430 did you test on?  If it's SDP, then it has a UART1
console, correct?

Kevin