From: Gregory CLEMENT <gregory.clement@bootlin.com>
To: Andrew Davis <afd@ti.com>,
Andre Przywara <andre.przywara@arm.com>,
Russell King <linux@armlinux.org.uk>,
Shawn Guo <shawnguo@kernel.org>,
Sascha Hauer <s.hauer@pengutronix.de>,
Pengutronix Kernel Team <kernel@pengutronix.de>,
Fabio Estevam <festevam@gmail.com>, Andrew Lunn <andrew@lunn.ch>,
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
Daniel Mack <daniel@zonque.org>,
Haojian Zhuang <haojian.zhuang@gmail.com>,
Robert Jarzmik <robert.jarzmik@free.fr>
Cc: linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org, imx@lists.linux.dev,
Andrew Davis <afd@ti.com>
Subject: Re: [PATCH v2 3/7] ARM: orion5x: Switch to new sys-off handler API
Date: Mon, 02 Sep 2024 16:28:08 +0200 [thread overview]
Message-ID: <87mskqf7uv.fsf@BLaptop.bootlin.com> (raw)
In-Reply-To: <20240729123538.175704-4-afd@ti.com>
Hi Andrew,
> Kernel now supports chained power-off handlers. Use
> register_platform_power_off() that registers a platform level power-off
> handler. Legacy pm_power_off() will be removed once all drivers and archs
> are converted to the new sys-off API.
>
> Signed-off-by: Andrew Davis <afd@ti.com>
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Applied on mvebu/arm
Thanks,
Gregory
> ---
> arch/arm/mach-orion5x/board-mss2.c | 2 +-
> arch/arm/mach-orion5x/dns323-setup.c | 6 +++---
> arch/arm/mach-orion5x/kurobox_pro-setup.c | 2 +-
> arch/arm/mach-orion5x/mv2120-setup.c | 2 +-
> arch/arm/mach-orion5x/net2big-setup.c | 2 +-
> arch/arm/mach-orion5x/terastation_pro2-setup.c | 2 +-
> arch/arm/mach-orion5x/ts209-setup.c | 2 +-
> arch/arm/mach-orion5x/ts409-setup.c | 2 +-
> 8 files changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm/mach-orion5x/board-mss2.c b/arch/arm/mach-orion5x/board-mss2.c
> index b0f16d223adf5..9e3d69891d2f6 100644
> --- a/arch/arm/mach-orion5x/board-mss2.c
> +++ b/arch/arm/mach-orion5x/board-mss2.c
> @@ -82,5 +82,5 @@ static void mss2_power_off(void)
> void __init mss2_init(void)
> {
> /* register mss2 specific power-off method */
> - pm_power_off = mss2_power_off;
> + register_platform_power_off(mss2_power_off);
> }
> diff --git a/arch/arm/mach-orion5x/dns323-setup.c b/arch/arm/mach-orion5x/dns323-setup.c
> index 062109efa0ecc..fcd38ff7ca459 100644
> --- a/arch/arm/mach-orion5x/dns323-setup.c
> +++ b/arch/arm/mach-orion5x/dns323-setup.c
> @@ -700,7 +700,7 @@ static void __init dns323_init(void)
> if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
> gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
> pr_err("DNS-323: failed to setup power-off GPIO\n");
> - pm_power_off = dns323a_power_off;
> + register_platform_power_off(dns323a_power_off);
> break;
> case DNS323_REV_B1:
> /* 5182 built-in SATA init */
> @@ -717,7 +717,7 @@ static void __init dns323_init(void)
> if (gpio_request(DNS323_GPIO_POWER_OFF, "POWEROFF") != 0 ||
> gpio_direction_output(DNS323_GPIO_POWER_OFF, 0) != 0)
> pr_err("DNS-323: failed to setup power-off GPIO\n");
> - pm_power_off = dns323b_power_off;
> + register_platform_power_off(dns323b_power_off);
> break;
> case DNS323_REV_C1:
> /* 5182 built-in SATA init */
> @@ -727,7 +727,7 @@ static void __init dns323_init(void)
> if (gpio_request(DNS323C_GPIO_POWER_OFF, "POWEROFF") != 0 ||
> gpio_direction_output(DNS323C_GPIO_POWER_OFF, 0) != 0)
> pr_err("DNS-323: failed to setup power-off GPIO\n");
> - pm_power_off = dns323c_power_off;
> + register_platform_power_off(dns323c_power_off);
>
> /* Now, -this- should theoretically be done by the sata_mv driver
> * once I figure out what's going on there. Maybe the behaviour
> diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c
> index acba066180801..339b10891808f 100644
> --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c
> +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c
> @@ -373,7 +373,7 @@ static void __init kurobox_pro_init(void)
> i2c_register_board_info(0, &kurobox_pro_i2c_rtc, 1);
>
> /* register Kurobox Pro specific power-off method */
> - pm_power_off = kurobox_pro_power_off;
> + register_platform_power_off(kurobox_pro_power_off);
> }
>
> #ifdef CONFIG_MACH_KUROBOX_PRO
> diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c
> index b7327a6128353..5b0249f109cde 100644
> --- a/arch/arm/mach-orion5x/mv2120-setup.c
> +++ b/arch/arm/mach-orion5x/mv2120-setup.c
> @@ -238,7 +238,7 @@ static void __init mv2120_init(void)
> if (gpio_request(MV2120_GPIO_POWER_OFF, "POWEROFF") != 0 ||
> gpio_direction_output(MV2120_GPIO_POWER_OFF, 1) != 0)
> pr_err("mv2120: failed to setup power-off GPIO\n");
> - pm_power_off = mv2120_power_off;
> + register_platform_power_off(mv2120_power_off);
> }
>
> /* Warning: HP uses a wrong mach-type (=526) in their bootloader */
> diff --git a/arch/arm/mach-orion5x/net2big-setup.c b/arch/arm/mach-orion5x/net2big-setup.c
> index 6ad9740b426b6..4afd9b4c71a94 100644
> --- a/arch/arm/mach-orion5x/net2big-setup.c
> +++ b/arch/arm/mach-orion5x/net2big-setup.c
> @@ -423,7 +423,7 @@ static void __init net2big_init(void)
>
> if (gpio_request(NET2BIG_GPIO_POWER_OFF, "power-off") == 0 &&
> gpio_direction_output(NET2BIG_GPIO_POWER_OFF, 0) == 0)
> - pm_power_off = net2big_power_off;
> + register_platform_power_off(net2big_power_off);
> else
> pr_err("net2big: failed to configure power-off GPIO\n");
>
> diff --git a/arch/arm/mach-orion5x/terastation_pro2-setup.c b/arch/arm/mach-orion5x/terastation_pro2-setup.c
> index 23a5521c68336..a9f01859d1012 100644
> --- a/arch/arm/mach-orion5x/terastation_pro2-setup.c
> +++ b/arch/arm/mach-orion5x/terastation_pro2-setup.c
> @@ -349,7 +349,7 @@ static void __init tsp2_init(void)
> i2c_register_board_info(0, &tsp2_i2c_rtc, 1);
>
> /* register Terastation Pro II specific power-off method */
> - pm_power_off = tsp2_power_off;
> + register_platform_power_off(tsp2_power_off);
> }
>
> MACHINE_START(TERASTATION_PRO2, "Buffalo Terastation Pro II/Live")
> diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c
> index bab8ba0e01ab9..de9092e992c56 100644
> --- a/arch/arm/mach-orion5x/ts209-setup.c
> +++ b/arch/arm/mach-orion5x/ts209-setup.c
> @@ -314,7 +314,7 @@ static void __init qnap_ts209_init(void)
> i2c_register_board_info(0, &qnap_ts209_i2c_rtc, 1);
>
> /* register tsx09 specific power-off method */
> - pm_power_off = qnap_tsx09_power_off;
> + register_platform_power_off(qnap_tsx09_power_off);
> }
>
> MACHINE_START(TS209, "QNAP TS-109/TS-209")
> diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c
> index 8131982c10d97..725688aa5cba7 100644
> --- a/arch/arm/mach-orion5x/ts409-setup.c
> +++ b/arch/arm/mach-orion5x/ts409-setup.c
> @@ -312,7 +312,7 @@ static void __init qnap_ts409_init(void)
> platform_device_register(&ts409_leds);
>
> /* register tsx09 specific power-off method */
> - pm_power_off = qnap_tsx09_power_off;
> + register_platform_power_off(qnap_tsx09_power_off);
> }
>
> MACHINE_START(TS409, "QNAP TS-409")
> --
> 2.39.2
next prev parent reply other threads:[~2024-09-02 14:29 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-29 12:35 [PATCH v2 0/7] Switch more ARM plats to sys-off handler API Andrew Davis
2024-07-29 12:35 ` [PATCH v2 1/7] ARM: highbank: Switch to new " Andrew Davis
2024-07-29 12:35 ` [PATCH v2 2/7] ARM: imx: " Andrew Davis
2024-07-29 12:35 ` [PATCH v2 3/7] ARM: orion5x: " Andrew Davis
2024-09-02 14:28 ` Gregory CLEMENT [this message]
2024-07-29 12:35 ` [PATCH v2 4/7] ARM: pxa: " Andrew Davis
2024-07-29 12:35 ` [PATCH v2 5/7] ARM: sa1100: " Andrew Davis
2024-07-29 12:35 ` [PATCH v2 6/7] ARM: vt8500: " Andrew Davis
2024-07-29 12:35 ` [PATCH v2 7/7] arm/xen: " Andrew Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87mskqf7uv.fsf@BLaptop.bootlin.com \
--to=gregory.clement@bootlin.com \
--cc=afd@ti.com \
--cc=andre.przywara@arm.com \
--cc=andrew@lunn.ch \
--cc=daniel@zonque.org \
--cc=festevam@gmail.com \
--cc=haojian.zhuang@gmail.com \
--cc=imx@lists.linux.dev \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=robert.jarzmik@free.fr \
--cc=s.hauer@pengutronix.de \
--cc=sebastian.hesselbarth@gmail.com \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).