* [PATCH v5] wifi: mt76: mt7915: add wds support when wed is enabled
@ 2024-08-03 7:58 Shengyu Qu
2024-08-04 2:43 ` kernel test robot
0 siblings, 1 reply; 5+ messages in thread
From: Shengyu Qu @ 2024-08-03 7:58 UTC (permalink / raw)
To: nbd, lorenzo, ryder.lee, shayne.chen, sean.wang, kvalo,
matthias.bgg, angelogioacchino.delregno, chui-hao.chiu,
emmanuel.grumbach, StanleyYP.Wang, meichia.chiu, johannes.berg,
quic_adisi, allen.ye, bo.jiao, linux-wireless, linux-kernel,
linux-arm-kernel, linux-mediatek
Cc: Shengyu Qu, Sujuan Chen
The current WED only supports 256 wcid, whereas mt7986 can support up to
512 entries, so firmware provides a rule to get sta_info by DA when wcid
is set to 0x3ff by txd. Also, WED provides a register to overwrite txd
wcid, that is, wcid[9:8] can be overwritten by 0x3 and wcid[7:0] is set
to 0xff by host driver.
However, firmware is unable to get sta_info from DA as DA != RA for
4addr cases, so firmware and wifi host driver both use wcid (256 - 271)
and (768 ~ 783) for sync up to get correct sta_info.
Currently WDS+WED config is completely broken on MT7986/7981 devices if
without this patch.
Tested-by: Sujuan Chen <sujuan.chen@mediatek.com>
Co-developed-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Bo Jiao <bo.jiao@mediatek.com>
Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com>
Signed-off-by: Shengyu Qu <wiagn233@outlook.com>
---
Changes since v1:
- Drop duplicate setting in mmio
- Reduce the patch size by redefining mt76_wcid_alloc
Changes since v2:
- Rework wds wcid getting flow
Changes since v3:
- Rebase to next-20240703
- Sync with downstream patch
Changes since v4:
- Rebase to next-20240802
---
drivers/net/wireless/mediatek/mt76/mt76.h | 9 +++++
.../net/wireless/mediatek/mt76/mt7915/main.c | 32 ++++++++++++++--
.../net/wireless/mediatek/mt76/mt7915/mcu.c | 16 ++++++--
.../net/wireless/mediatek/mt76/mt7915/mcu.h | 1 +
drivers/net/wireless/mediatek/mt76/util.c | 37 +++++++++++++++++--
drivers/net/wireless/mediatek/mt76/util.h | 7 +++-
6 files changed, 91 insertions(+), 11 deletions(-)
diff --git a/drivers/net/wireless/mediatek/mt76/mt76.h b/drivers/net/wireless/mediatek/mt76/mt76.h
index 4a58a78d5ed25..1186a4998faff 100644
--- a/drivers/net/wireless/mediatek/mt76/mt76.h
+++ b/drivers/net/wireless/mediatek/mt76/mt76.h
@@ -28,6 +28,9 @@
#define MT76_TOKEN_FREE_THR 64
+#define MT76_WED_WDS_MIN 256
+#define MT76_WED_WDS_MAX 272
+
#define MT_QFLAG_WED_RING GENMASK(1, 0)
#define MT_QFLAG_WED_TYPE GENMASK(4, 2)
#define MT_QFLAG_WED BIT(5)
@@ -71,6 +74,12 @@ enum mt76_wed_type {
MT76_WED_RRO_Q_IND,
};
+enum mt76_wed_state {
+ MT76_WED_DEFAULT,
+ MT76_WED_ACTIVE,
+ MT76_WED_WDS_ACTIVE,
+};
+
struct mt76_bus_ops {
u32 (*rr)(struct mt76_dev *dev, u32 offset);
void (*wr)(struct mt76_dev *dev, u32 offset, u32 val);
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/main.c b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
index 049223df9beb1..dc4d87e004a0f 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/main.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/main.c
@@ -745,8 +745,15 @@ int mt7915_mac_sta_add(struct mt76_dev *mdev, struct ieee80211_vif *vif,
bool ext_phy = mvif->phy != &dev->phy;
int ret, idx;
u32 addr;
+ u8 flags = MT76_WED_DEFAULT;
- idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7915_WTBL_STA);
+ if (mtk_wed_device_active(&dev->mt76.mmio.wed) &&
+ !is_mt7915(&dev->mt76)) {
+ flags = test_bit(MT_WCID_FLAG_4ADDR, &msta->wcid.flags) ?
+ MT76_WED_WDS_ACTIVE : MT76_WED_ACTIVE;
+ }
+
+ idx = __mt76_wcid_alloc(mdev->wcid_mask, MT7915_WTBL_STA, flags);
if (idx < 0)
return -ENOSPC;
@@ -1201,12 +1208,27 @@ static void mt7915_sta_set_4addr(struct ieee80211_hw *hw,
{
struct mt7915_dev *dev = mt7915_hw_dev(hw);
struct mt7915_sta *msta = (struct mt7915_sta *)sta->drv_priv;
+ int min = MT76_WED_WDS_MIN, max = MT76_WED_WDS_MAX;
if (enabled)
set_bit(MT_WCID_FLAG_4ADDR, &msta->wcid.flags);
else
clear_bit(MT_WCID_FLAG_4ADDR, &msta->wcid.flags);
+ if (mtk_wed_device_active(&dev->mt76.mmio.wed) &&
+ !is_mt7915(&dev->mt76) &&
+ (msta->wcid.idx < min || msta->wcid.idx > max - 1)) {
+ struct ieee80211_sta *pre_sta;
+
+ pre_sta = kzalloc(sizeof(*sta) + sizeof(*msta), GFP_KERNEL);
+ mt76_sta_pre_rcu_remove(hw, vif, sta);
+ memmove(pre_sta, sta, sizeof(*sta) + sizeof(*msta));
+ mt7915_sta_add(hw, vif, sta);
+ synchronize_rcu();
+ mt7915_sta_remove(hw, vif, pre_sta);
+ kfree(pre_sta);
+ }
+
mt76_connac_mcu_wtbl_update_hdr_trans(&dev->mt76, vif, sta);
}
@@ -1644,15 +1666,19 @@ mt7915_net_fill_forward_path(struct ieee80211_hw *hw,
if (!mtk_wed_device_active(wed))
return -ENODEV;
- if (msta->wcid.idx > 0xff)
+ if (msta->wcid.idx > MT7915_WTBL_STA)
return -EIO;
path->type = DEV_PATH_MTK_WDMA;
path->dev = ctx->dev;
path->mtk_wdma.wdma_idx = wed->wdma_idx;
path->mtk_wdma.bss = mvif->mt76.idx;
- path->mtk_wdma.wcid = is_mt7915(&dev->mt76) ? msta->wcid.idx : 0x3ff;
path->mtk_wdma.queue = phy != &dev->phy;
+ if (test_bit(MT_WCID_FLAG_4ADDR, &msta->wcid.flags) ||
+ is_mt7915(&dev->mt76))
+ path->mtk_wdma.wcid = msta->wcid.idx;
+ else
+ path->mtk_wdma.wcid = 0x3ff;
ctx->dev = NULL;
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
index 2185cd24e2e1c..0f715a4c21ada 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
@@ -2352,10 +2352,18 @@ int mt7915_mcu_init_firmware(struct mt7915_dev *dev)
if (ret)
return ret;
- if ((mtk_wed_device_active(&dev->mt76.mmio.wed) &&
- is_mt7915(&dev->mt76)) ||
- !mtk_wed_get_rx_capa(&dev->mt76.mmio.wed))
- mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY), 0, 0, 0);
+ if (mtk_wed_device_active(&dev->mt76.mmio.wed)) {
+ if (is_mt7915(&dev->mt76) ||
+ !mtk_wed_get_rx_capa(&dev->mt76.mmio.wed))
+ ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY),
+ 0, 0, 0);
+ else
+ ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(SET),
+ MCU_WA_PARAM_WED_VERSION,
+ dev->mt76.mmio.wed.rev_id, 0);
+ if (ret)
+ return ret;
+ }
ret = mt7915_mcu_set_mwds(dev, 1);
if (ret)
diff --git a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
index b41ac4aaced7f..b2bf5472b2d70 100644
--- a/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
+++ b/drivers/net/wireless/mediatek/mt76/mt7915/mcu.h
@@ -279,6 +279,7 @@ enum {
MCU_WA_PARAM_CPU_UTIL = 0x0b,
MCU_WA_PARAM_RED = 0x0e,
MCU_WA_PARAM_RED_SETTING = 0x40,
+ MCU_WA_PARAM_WED_VERSION = 0x32,
};
enum mcu_mmps_mode {
diff --git a/drivers/net/wireless/mediatek/mt76/util.c b/drivers/net/wireless/mediatek/mt76/util.c
index d6c01a2dd1988..461b74068fc30 100644
--- a/drivers/net/wireless/mediatek/mt76/util.c
+++ b/drivers/net/wireless/mediatek/mt76/util.c
@@ -42,9 +42,11 @@ bool ____mt76_poll_msec(struct mt76_dev *dev, u32 offset, u32 mask, u32 val,
}
EXPORT_SYMBOL_GPL(____mt76_poll_msec);
-int mt76_wcid_alloc(u32 *mask, int size)
+int __mt76_wcid_alloc(u32 *mask, int size, u8 flag)
{
int i, idx = 0, cur;
+ int min = MT76_WED_WDS_MIN;
+ int max = MT76_WED_WDS_MAX;
for (i = 0; i < DIV_ROUND_UP(size, 32); i++) {
idx = ffs(~mask[i]);
@@ -53,16 +55,45 @@ int mt76_wcid_alloc(u32 *mask, int size)
idx--;
cur = i * 32 + idx;
- if (cur >= size)
+
+ switch (flag) {
+ case MT76_WED_ACTIVE:
+ if (cur >= min && cur < max)
+ continue;
+
+ if (cur >= size) {
+ u32 end = max - min - 1;
+
+ i = min / 32;
+ idx = ffs(~mask[i] & GENMASK(end, 0));
+ if (!idx)
+ goto error;
+ idx--;
+ cur = min + idx;
+ }
+
break;
+ case MT76_WED_WDS_ACTIVE:
+ if (cur < min)
+ continue;
+ if (cur >= max)
+ goto error;
+
+ break;
+ default:
+ if (cur >= size)
+ goto error;
+ break;
+ }
mask[i] |= BIT(idx);
return cur;
}
+error:
return -1;
}
-EXPORT_SYMBOL_GPL(mt76_wcid_alloc);
+EXPORT_SYMBOL_GPL(__mt76_wcid_alloc);
int mt76_get_min_avg_rssi(struct mt76_dev *dev, bool ext_phy)
{
diff --git a/drivers/net/wireless/mediatek/mt76/util.h b/drivers/net/wireless/mediatek/mt76/util.h
index 260965dde94cf..99b7263c0a205 100644
--- a/drivers/net/wireless/mediatek/mt76/util.h
+++ b/drivers/net/wireless/mediatek/mt76/util.h
@@ -27,7 +27,12 @@ enum {
#define MT76_INCR(_var, _size) \
(_var = (((_var) + 1) % (_size)))
-int mt76_wcid_alloc(u32 *mask, int size);
+int __mt76_wcid_alloc(u32 *mask, int size, u8 flags);
+
+static inline int mt76_wcid_alloc(u32 *mask, int size)
+{
+ return __mt76_wcid_alloc(mask, size, 0);
+}
static inline void
mt76_wcid_mask_set(u32 *mask, int idx)
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v5] wifi: mt76: mt7915: add wds support when wed is enabled
2024-08-03 7:58 [PATCH v5] wifi: mt76: mt7915: add wds support when wed is enabled Shengyu Qu
@ 2024-08-04 2:43 ` kernel test robot
2024-08-04 9:28 ` Shengyu Qu
0 siblings, 1 reply; 5+ messages in thread
From: kernel test robot @ 2024-08-04 2:43 UTC (permalink / raw)
To: Shengyu Qu, nbd, lorenzo, ryder.lee, shayne.chen, sean.wang,
kvalo, matthias.bgg, angelogioacchino.delregno, chui-hao.chiu,
emmanuel.grumbach, StanleyYP.Wang, meichia.chiu, johannes.berg,
quic_adisi, allen.ye, bo.jiao, linux-wireless, linux-kernel,
linux-arm-kernel, linux-mediatek
Cc: oe-kbuild-all, Shengyu Qu, Sujuan Chen
Hi Shengyu,
kernel test robot noticed the following build errors:
[auto build test ERROR on wireless-next/main]
[also build test ERROR on wireless/main linus/master v6.11-rc1 next-20240802]
[If your patch is applied to the wrong git tree, kindly drop us a note.
And when submitting patch, we suggest to use '--base' as documented in
https://git-scm.com/docs/git-format-patch#_base_tree_information]
url: https://github.com/intel-lab-lkp/linux/commits/Shengyu-Qu/wifi-mt76-mt7915-add-wds-support-when-wed-is-enabled/20240803-231632
base: https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git main
patch link: https://lore.kernel.org/r/TY3P286MB2611CB2F4F5FA27D782AA80A98BC2%40TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM
patch subject: [PATCH v5] wifi: mt76: mt7915: add wds support when wed is enabled
config: x86_64-buildonly-randconfig-003-20240804 (https://download.01.org/0day-ci/archive/20240804/202408041039.BqVRJOqp-lkp@intel.com/config)
compiler: gcc-12 (Debian 12.2.0-14) 12.2.0
reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240804/202408041039.BqVRJOqp-lkp@intel.com/reproduce)
If you fix the issue in a separate patch/commit (i.e. not just a new version of
the same patch/commit), kindly add following tags
| Reported-by: kernel test robot <lkp@intel.com>
| Closes: https://lore.kernel.org/oe-kbuild-all/202408041039.BqVRJOqp-lkp@intel.com/
All errors (new ones prefixed by >>):
drivers/net/wireless/mediatek/mt76/mt7915/mcu.c: In function 'mt7915_mcu_init_firmware':
>> drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:2363:67: error: 'struct mtk_wed_device' has no member named 'rev_id'
2363 | dev->mt76.mmio.wed.rev_id, 0);
| ^
vim +2363 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
2322
2323 int mt7915_mcu_init_firmware(struct mt7915_dev *dev)
2324 {
2325 int ret;
2326
2327 /* force firmware operation mode into normal state,
2328 * which should be set before firmware download stage.
2329 */
2330 mt76_wr(dev, MT_SWDEF_MODE, MT_SWDEF_NORMAL_MODE);
2331
2332 ret = mt7915_driver_own(dev, 0);
2333 if (ret)
2334 return ret;
2335 /* set driver own for band1 when two hif exist */
2336 if (dev->hif2) {
2337 ret = mt7915_driver_own(dev, 1);
2338 if (ret)
2339 return ret;
2340 }
2341
2342 ret = mt7915_load_firmware(dev);
2343 if (ret)
2344 return ret;
2345
2346 set_bit(MT76_STATE_MCU_RUNNING, &dev->mphy.state);
2347 ret = mt7915_mcu_fw_log_2_host(dev, MCU_FW_LOG_WM, 0);
2348 if (ret)
2349 return ret;
2350
2351 ret = mt7915_mcu_fw_log_2_host(dev, MCU_FW_LOG_WA, 0);
2352 if (ret)
2353 return ret;
2354
2355 if (mtk_wed_device_active(&dev->mt76.mmio.wed)) {
2356 if (is_mt7915(&dev->mt76) ||
2357 !mtk_wed_get_rx_capa(&dev->mt76.mmio.wed))
2358 ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY),
2359 0, 0, 0);
2360 else
2361 ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(SET),
2362 MCU_WA_PARAM_WED_VERSION,
> 2363 dev->mt76.mmio.wed.rev_id, 0);
2364 if (ret)
2365 return ret;
2366 }
2367
2368 ret = mt7915_mcu_set_mwds(dev, 1);
2369 if (ret)
2370 return ret;
2371
2372 ret = mt7915_mcu_set_muru_ctrl(dev, MURU_SET_PLATFORM_TYPE,
2373 MURU_PLATFORM_TYPE_PERF_LEVEL_2);
2374 if (ret)
2375 return ret;
2376
2377 ret = mt7915_mcu_init_rx_airtime(dev);
2378 if (ret)
2379 return ret;
2380
2381 return mt7915_mcu_set_red(dev, mtk_wed_device_active(&dev->mt76.mmio.wed));
2382 }
2383
--
0-DAY CI Kernel Test Service
https://github.com/intel/lkp-tests/wiki
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v5] wifi: mt76: mt7915: add wds support when wed is enabled
2024-08-04 2:43 ` kernel test robot
@ 2024-08-04 9:28 ` Shengyu Qu
2024-08-04 9:56 ` Kalle Valo
0 siblings, 1 reply; 5+ messages in thread
From: Shengyu Qu @ 2024-08-04 9:28 UTC (permalink / raw)
To: kernel test robot, nbd, lorenzo, ryder.lee, shayne.chen,
sean.wang, kvalo, matthias.bgg, angelogioacchino.delregno,
chui-hao.chiu, emmanuel.grumbach, StanleyYP.Wang, meichia.chiu,
johannes.berg, quic_adisi, allen.ye, bo.jiao, linux-wireless,
linux-kernel, linux-arm-kernel, linux-mediatek
Cc: wiagn233, oe-kbuild-all, Sujuan Chen
[-- Attachment #1.1.1: Type: text/plain, Size: 4272 bytes --]
This error report is a false warning. "struct mtk_wed_device" needs
"CONFIG_NET_MEDIATEK_SOC_WED" to be defined.
Best regards,
Shengyu
在 2024/8/4 10:43, kernel test robot 写道:
> Hi Shengyu,
>
> kernel test robot noticed the following build errors:
>
> [auto build test ERROR on wireless-next/main]
> [also build test ERROR on wireless/main linus/master v6.11-rc1 next-20240802]
> [If your patch is applied to the wrong git tree, kindly drop us a note.
> And when submitting patch, we suggest to use '--base' as documented in
> https://git-scm.com/docs/git-format-patch#_base_tree_information]
>
> url: https://github.com/intel-lab-lkp/linux/commits/Shengyu-Qu/wifi-mt76-mt7915-add-wds-support-when-wed-is-enabled/20240803-231632
> base: https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next.git main
> patch link: https://lore.kernel.org/r/TY3P286MB2611CB2F4F5FA27D782AA80A98BC2%40TY3P286MB2611.JPNP286.PROD.OUTLOOK.COM
> patch subject: [PATCH v5] wifi: mt76: mt7915: add wds support when wed is enabled
> config: x86_64-buildonly-randconfig-003-20240804 (https://download.01.org/0day-ci/archive/20240804/202408041039.BqVRJOqp-lkp@intel.com/config)
> compiler: gcc-12 (Debian 12.2.0-14) 12.2.0
> reproduce (this is a W=1 build): (https://download.01.org/0day-ci/archive/20240804/202408041039.BqVRJOqp-lkp@intel.com/reproduce)
>
> If you fix the issue in a separate patch/commit (i.e. not just a new version of
> the same patch/commit), kindly add following tags
> | Reported-by: kernel test robot <lkp@intel.com>
> | Closes: https://lore.kernel.org/oe-kbuild-all/202408041039.BqVRJOqp-lkp@intel.com/
>
> All errors (new ones prefixed by >>):
>
> drivers/net/wireless/mediatek/mt76/mt7915/mcu.c: In function 'mt7915_mcu_init_firmware':
>>> drivers/net/wireless/mediatek/mt76/mt7915/mcu.c:2363:67: error: 'struct mtk_wed_device' has no member named 'rev_id'
> 2363 | dev->mt76.mmio.wed.rev_id, 0);
> | ^
>
>
> vim +2363 drivers/net/wireless/mediatek/mt76/mt7915/mcu.c
>
> 2322
> 2323 int mt7915_mcu_init_firmware(struct mt7915_dev *dev)
> 2324 {
> 2325 int ret;
> 2326
> 2327 /* force firmware operation mode into normal state,
> 2328 * which should be set before firmware download stage.
> 2329 */
> 2330 mt76_wr(dev, MT_SWDEF_MODE, MT_SWDEF_NORMAL_MODE);
> 2331
> 2332 ret = mt7915_driver_own(dev, 0);
> 2333 if (ret)
> 2334 return ret;
> 2335 /* set driver own for band1 when two hif exist */
> 2336 if (dev->hif2) {
> 2337 ret = mt7915_driver_own(dev, 1);
> 2338 if (ret)
> 2339 return ret;
> 2340 }
> 2341
> 2342 ret = mt7915_load_firmware(dev);
> 2343 if (ret)
> 2344 return ret;
> 2345
> 2346 set_bit(MT76_STATE_MCU_RUNNING, &dev->mphy.state);
> 2347 ret = mt7915_mcu_fw_log_2_host(dev, MCU_FW_LOG_WM, 0);
> 2348 if (ret)
> 2349 return ret;
> 2350
> 2351 ret = mt7915_mcu_fw_log_2_host(dev, MCU_FW_LOG_WA, 0);
> 2352 if (ret)
> 2353 return ret;
> 2354
> 2355 if (mtk_wed_device_active(&dev->mt76.mmio.wed)) {
> 2356 if (is_mt7915(&dev->mt76) ||
> 2357 !mtk_wed_get_rx_capa(&dev->mt76.mmio.wed))
> 2358 ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY),
> 2359 0, 0, 0);
> 2360 else
> 2361 ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(SET),
> 2362 MCU_WA_PARAM_WED_VERSION,
>> 2363 dev->mt76.mmio.wed.rev_id, 0);
> 2364 if (ret)
> 2365 return ret;
> 2366 }
> 2367
> 2368 ret = mt7915_mcu_set_mwds(dev, 1);
> 2369 if (ret)
> 2370 return ret;
> 2371
> 2372 ret = mt7915_mcu_set_muru_ctrl(dev, MURU_SET_PLATFORM_TYPE,
> 2373 MURU_PLATFORM_TYPE_PERF_LEVEL_2);
> 2374 if (ret)
> 2375 return ret;
> 2376
> 2377 ret = mt7915_mcu_init_rx_airtime(dev);
> 2378 if (ret)
> 2379 return ret;
> 2380
> 2381 return mt7915_mcu_set_red(dev, mtk_wed_device_active(&dev->mt76.mmio.wed));
> 2382 }
> 2383
>
[-- Attachment #1.1.2: OpenPGP public key --]
[-- Type: application/pgp-keys, Size: 6977 bytes --]
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 840 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v5] wifi: mt76: mt7915: add wds support when wed is enabled
2024-08-04 9:28 ` Shengyu Qu
@ 2024-08-04 9:56 ` Kalle Valo
2024-08-04 12:17 ` Shengyu Qu
0 siblings, 1 reply; 5+ messages in thread
From: Kalle Valo @ 2024-08-04 9:56 UTC (permalink / raw)
To: Shengyu Qu
Cc: kernel test robot, nbd, lorenzo, ryder.lee, shayne.chen,
sean.wang, matthias.bgg, angelogioacchino.delregno, chui-hao.chiu,
emmanuel.grumbach, StanleyYP.Wang, meichia.chiu, johannes.berg,
quic_adisi, allen.ye, bo.jiao, linux-wireless, linux-kernel,
linux-arm-kernel, linux-mediatek, oe-kbuild-all, Sujuan Chen
Shengyu Qu <wiagn233@outlook.com> writes:
> This error report is a false warning. "struct mtk_wed_device" needs
> "CONFIG_NET_MEDIATEK_SOC_WED" to be defined.
I didn't investigate anything but based on your description that sounds
wrong. The code should should not be compiled if it depends on
CONFIG_NET_MEDIATEK_SOC_WED but that's not set. We have zero rule for
compilation errors or warnings.
--
https://patchwork.kernel.org/project/linux-wireless/list/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v5] wifi: mt76: mt7915: add wds support when wed is enabled
2024-08-04 9:56 ` Kalle Valo
@ 2024-08-04 12:17 ` Shengyu Qu
0 siblings, 0 replies; 5+ messages in thread
From: Shengyu Qu @ 2024-08-04 12:17 UTC (permalink / raw)
To: Kalle Valo
Cc: wiagn233, kernel test robot, nbd, lorenzo, ryder.lee, shayne.chen,
sean.wang, matthias.bgg, angelogioacchino.delregno, chui-hao.chiu,
emmanuel.grumbach, StanleyYP.Wang, meichia.chiu, johannes.berg,
quic_adisi, allen.ye, bo.jiao, linux-wireless, linux-kernel,
linux-arm-kernel, linux-mediatek, oe-kbuild-all, Sujuan Chen
[-- Attachment #1.1.1: Type: text/plain, Size: 1014 bytes --]
You are right. I'm thinking about changing the code like this:
#ifdef CONFIG_NET_MEDIATEK_SOC_WED
if (mtk_wed_device_active(&dev->mt76.mmio.wed)) {
if (is_mt7915(&dev->mt76) ||
!mtk_wed_get_rx_capa(&dev->mt76.mmio.wed))
ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY),
0, 0, 0);
else
ret = mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(SET),
MCU_WA_PARAM_WED_VERSION,
dev->mt76.mmio.wed.rev_id, 0);
if (ret)
return ret;
}
#endif
Do you think this is ok?
Best regards,
Shengyu
在 2024/8/4 17:56, Kalle Valo 写道:
> Shengyu Qu <wiagn233@outlook.com> writes:
>
>> This error report is a false warning. "struct mtk_wed_device" needs
>> "CONFIG_NET_MEDIATEK_SOC_WED" to be defined.
>
> I didn't investigate anything but based on your description that sounds
> wrong. The code should should not be compiled if it depends on
> CONFIG_NET_MEDIATEK_SOC_WED but that's not set. We have zero rule for
> compilation errors or warnings.
>
[-- Attachment #1.1.2: OpenPGP public key --]
[-- Type: application/pgp-keys, Size: 6977 bytes --]
[-- Attachment #2: OpenPGP digital signature --]
[-- Type: application/pgp-signature, Size: 840 bytes --]
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2024-08-04 12:18 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-08-03 7:58 [PATCH v5] wifi: mt76: mt7915: add wds support when wed is enabled Shengyu Qu
2024-08-04 2:43 ` kernel test robot
2024-08-04 9:28 ` Shengyu Qu
2024-08-04 9:56 ` Kalle Valo
2024-08-04 12:17 ` Shengyu Qu
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).