From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Thu, 30 Mar 2017 18:03:50 +0200 Subject: [PATCH v4 0/4] gpio: mvebu: Add PWM fan support In-Reply-To: <20170327194301.1104-1-ralph.sennhauser@gmail.com> (Ralph Sennhauser's message of "Mon, 27 Mar 2017 21:42:56 +0200") References: <20170327194301.1104-1-ralph.sennhauser@gmail.com> Message-ID: <87o9wi92ft.fsf@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Ralph, On lun., mars 27 2017, Ralph Sennhauser wrote: [...] > Andrew Lunn (4): > gpio: mvebu: Add limited PWM support > mvebu: xp: Add PWM properties to .dtsi files > ARM: mvebu: Enable SENSORS_PWM_FAN in defconfig > mvebu: wrt1900ac: Use pwm-fan rather than gpio-fan I didn't see any big problem with this 3 patches, I will applied them once the first one will be applied on the gpio tree or at least acked. Thanks, Gregory > > .../devicetree/bindings/gpio/gpio-mvebu.txt | 32 ++ > MAINTAINERS | 2 + > arch/arm/boot/dts/armada-370.dtsi | 16 +- > arch/arm/boot/dts/armada-xp-linksys-mamba.dts | 8 +- > arch/arm/boot/dts/armada-xp-mv78230.dtsi | 14 +- > arch/arm/boot/dts/armada-xp-mv78260.dtsi | 16 +- > arch/arm/boot/dts/armada-xp-mv78460.dtsi | 16 +- > arch/arm/configs/mvebu_v7_defconfig | 2 + > drivers/gpio/gpio-mvebu.c | 324 ++++++++++++++++++++- > 9 files changed, 394 insertions(+), 36 deletions(-) > > -- > 2.10.2 > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com