From mboxrd@z Thu Jan 1 00:00:00 1970 From: gregory.clement@free-electrons.com (Gregory CLEMENT) Date: Tue, 18 Jul 2017 15:34:13 +0200 Subject: [PATCH 1/3] arm64: dts: marvell: use ICU for the CP110 slave RTC In-Reply-To: <20170718131034.25167-2-thomas.petazzoni@free-electrons.com> (Thomas Petazzoni's message of "Tue, 18 Jul 2017 15:10:32 +0200") References: <20170718131034.25167-1-thomas.petazzoni@free-electrons.com> <20170718131034.25167-2-thomas.petazzoni@free-electrons.com> Message-ID: <87pocx7tt6.fsf@free-electrons.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Hi Thomas, On mar., juil. 18 2017, Thomas Petazzoni wrote: > When the conversion of the Marvell CP110 Device Tree description from > using GIC interrupts to using ICU interrupts was done, the RTC on the > slave CP110 was left unchanged. This commit fixes that, so that all > devices on the CP properly get their interrupt through the ICU. > > Fixes: 6ef84a827c375 ("arm64: dts: marvell: enable GICP and ICU on Armada 7K/8K") > Signed-off-by: Thomas Petazzoni Applied on mvebu/fixes Thanks, Gregory > --- > There's no need for a Cc: stable, because the ICU conversion was > merged in 4.13-rc1. > --- > arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi > index 8c08a64..67936f7 100644 > --- a/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi > +++ b/arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi > @@ -64,7 +64,7 @@ > compatible = "marvell,armada-8k-rtc"; > reg = <0x284000 0x20>, <0x284080 0x24>; > reg-names = "rtc", "rtc-soc"; > - interrupts = ; > + interrupts = ; > }; > > cps_ethernet: ethernet at 0 { > -- > 2.9.4 > -- Gregory Clement, Free Electrons Kernel, drivers, real-time and embedded Linux development, consulting, training and support. http://free-electrons.com