From: Marc Zyngier <maz@kernel.org>
To: Michal Simek <michal.simek@xilinx.com>
Cc: linux-kernel@vger.kernel.org, monstr@monstr.eu, git@xilinx.com,
Robert Hancock <robert.hancock@calian.com>,
Stefan Asserhall <stefan.asserhall@xilinx.com>,
Thomas Gleixner <tglx@linutronix.de>,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH] irqchip: xilinx: Enable generic irq multi handler
Date: Thu, 03 Mar 2022 17:24:02 +0000 [thread overview]
Message-ID: <87sfrz0x1p.wl-maz@kernel.org> (raw)
In-Reply-To: <2a08d6c33e95d5da5d564ed3fbddc835983ef355.1646323896.git.michal.simek@xilinx.com>
On Thu, 03 Mar 2022 16:11:39 +0000,
Michal Simek <michal.simek@xilinx.com> wrote:
>
> Register default arch handler via driver instead of directly pointing to
> xilinx intc controller. This patch makes architecture code more generic.
>
> Signed-off-by: Michal Simek <michal.simek@xilinx.com>
> Reviewed-by: Stefan Asserhall <stefan.asserhall@xilinx.com>
> ---
>
> arch/microblaze/Kconfig | 2 ++
> arch/microblaze/include/asm/irq.h | 3 ---
> arch/microblaze/kernel/irq.c | 16 +---------------
> drivers/irqchip/irq-xilinx-intc.c | 22 +++++++++++++++++++++-
> 4 files changed, 24 insertions(+), 19 deletions(-)
>
> diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
> index 59798e43cdb0..da568e981604 100644
> --- a/arch/microblaze/Kconfig
> +++ b/arch/microblaze/Kconfig
> @@ -45,6 +45,8 @@ config MICROBLAZE
> select SET_FS
> select ZONE_DMA
> select TRACE_IRQFLAGS_SUPPORT
> + select GENERIC_IRQ_MULTI_HANDLER
> + select HANDLE_DOMAIN_IRQ
>
> # Endianness selection
> choice
> diff --git a/arch/microblaze/include/asm/irq.h b/arch/microblaze/include/asm/irq.h
> index 0a28e80bbab0..cb6ab55d1d01 100644
> --- a/arch/microblaze/include/asm/irq.h
> +++ b/arch/microblaze/include/asm/irq.h
> @@ -11,7 +11,4 @@
> struct pt_regs;
> extern void do_IRQ(struct pt_regs *regs);
>
> -/* should be defined in each interrupt controller driver */
> -extern unsigned int xintc_get_irq(void);
> -
> #endif /* _ASM_MICROBLAZE_IRQ_H */
> diff --git a/arch/microblaze/kernel/irq.c b/arch/microblaze/kernel/irq.c
> index 903dad822fad..1f8cb4c4f74f 100644
> --- a/arch/microblaze/kernel/irq.c
> +++ b/arch/microblaze/kernel/irq.c
> @@ -20,27 +20,13 @@
> #include <linux/irqchip.h>
> #include <linux/of_irq.h>
>
> -static u32 concurrent_irq;
> -
> void __irq_entry do_IRQ(struct pt_regs *regs)
> {
> - unsigned int irq;
> struct pt_regs *old_regs = set_irq_regs(regs);
> trace_hardirqs_off();
>
> irq_enter();
> - irq = xintc_get_irq();
> -next_irq:
> - BUG_ON(!irq);
> - generic_handle_irq(irq);
> -
> - irq = xintc_get_irq();
> - if (irq != -1U) {
> - pr_debug("next irq: %d\n", irq);
> - ++concurrent_irq;
> - goto next_irq;
> - }
> -
> + handle_arch_irq(regs);
> irq_exit();
> set_irq_regs(old_regs);
> trace_hardirqs_on();
> diff --git a/drivers/irqchip/irq-xilinx-intc.c b/drivers/irqchip/irq-xilinx-intc.c
> index 356a59755d63..c6710190c152 100644
> --- a/drivers/irqchip/irq-xilinx-intc.c
> +++ b/drivers/irqchip/irq-xilinx-intc.c
> @@ -110,7 +110,7 @@ static struct irq_chip intc_dev = {
> .irq_mask_ack = intc_mask_ack,
> };
>
> -unsigned int xintc_get_irq(void)
> +static unsigned int xintc_get_irq(void)
> {
> unsigned int irq = -1;
> u32 hwirq;
> @@ -164,6 +164,25 @@ static void xil_intc_irq_handler(struct irq_desc *desc)
> chained_irq_exit(chip, desc);
> }
>
> +static u32 concurrent_irq;
Please kill this. It serves no purpose at all.
> +
> +static void xil_intc_handle_irq(struct pt_regs *regs)
> +{
> + unsigned int irq;
> +
> + irq = xintc_get_irq();
> +next_irq:
> + BUG_ON(!irq);
> + generic_handle_irq(irq);
> +
> + irq = xintc_get_irq();
> + if (irq != -1U) {
> + pr_debug("next irq: %d\n", irq);
> + ++concurrent_irq;
> + goto next_irq;
> + }
How about writing this in (basic) C code, and use the exiting APIs?
diff --git a/drivers/irqchip/irq-xilinx-intc.c b/drivers/irqchip/irq-xilinx-intc.c
index 356a59755d63..18125bb841b2 100644
--- a/drivers/irqchip/irq-xilinx-intc.c
+++ b/drivers/irqchip/irq-xilinx-intc.c
@@ -110,18 +110,19 @@ static struct irq_chip intc_dev = {
.irq_mask_ack = intc_mask_ack,
};
-unsigned int xintc_get_irq(void)
+#define SPURIOUS_IRQ (-1U)
+
+static void xil_intc_handle_irq(struct pt_regs *regs)
{
- unsigned int irq = -1;
u32 hwirq;
- hwirq = xintc_read(primary_intc, IVR);
- if (hwirq != -1U)
- irq = irq_find_mapping(primary_intc->root_domain, hwirq);
-
- pr_debug("irq-xilinx: hwirq=%d, irq=%d\n", hwirq, irq);
+ do {
+ hwirq = xintc_read(primary_intc, IVR);
+ if (unlikely(hwirq == SPURIOUS_IRQ))
+ break;
- return irq;
+ generic_handle_domain_irq(primary_intc->root_domain, hwirq);
+ } while (true);
}
static int xintc_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
M.
--
Without deviation from the norm, progress is not possible.
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2022-03-03 17:25 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-03-03 16:11 [PATCH] irqchip: xilinx: Enable generic irq multi handler Michal Simek
2022-03-03 17:01 ` Robert Hancock
2022-03-04 6:58 ` Michal Simek
2022-03-03 17:24 ` Marc Zyngier [this message]
2022-03-04 7:51 ` Michal Simek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87sfrz0x1p.wl-maz@kernel.org \
--to=maz@kernel.org \
--cc=git@xilinx.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michal.simek@xilinx.com \
--cc=monstr@monstr.eu \
--cc=robert.hancock@calian.com \
--cc=stefan.asserhall@xilinx.com \
--cc=tglx@linutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).