From mboxrd@z Thu Jan 1 00:00:00 1970 From: eric@anholt.net (Eric Anholt) Date: Wed, 01 Mar 2017 11:31:31 -0800 Subject: [PATCH v3 2/7] mmc: bcm2835: Add new driver for the sdhost controller. In-Reply-To: <68761051.37200.1488396112552@email.1und1.de> References: <1487668026-7100-1-git-send-email-kraxel@redhat.com> <1487668026-7100-3-git-send-email-kraxel@redhat.com> <87tw7c27xk.fsf@eliezer.anholt.net> <68761051.37200.1488396112552@email.1und1.de> Message-ID: <87varsequk.fsf@eliezer.anholt.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Stefan Wahren writes: >> Eric Anholt hat am 1. M?rz 2017 um 19:00 geschrieben: >> >> >> Gerd Hoffmann writes: >> >> > From: Eric Anholt >> > >> > The 2835 has two SD controllers: The Arasan sdhci controller (supported >> > by the iproc driver) and a custom sdhost controller. This patch adds a >> > driver for the latter. >> > >> > The sdhci controller supports both sdcard and sdio. The sdhost >> > controller supports the sdcard only, but has better performance. Also >> > note that the rpi3 has sdio wifi, so driving the sdcard with the sdhost >> > controller allows to use the sdhci controller for wifi support. >> > >> > The configuration is done by devicetree via pin muxing. Both SD >> > controller are available on the same pins (2 pin groups = pin 22 to 27 + >> > pin 48 to 53). So it's possible to use both SD controllers at the same >> > time with different pin groups. >> > >> > The code was originally written by Phil Elwell in the downstream >> > Rasbperry Pi tree, and I did a major cleanup on it (+319, -707 lines >> > out of the original 2055) for inclusion. >> > >> > Signed-off-by: Eric Anholt >> >> Ulf, what do you need done to this driver patch before it can go in? >> The commit message seems like it could use some rewriting at this point >> (Personally I would drop the detailed changelogs from Stefan and Gerd, >> updating the last paragraph here to give them credit), but what's >> important to me is getting the driver in so that distros don't have to >> carry this patch for wifi support. > > I'm still working on 3 small patches for this driver: > > 1. trivial error in a register comment > 2. ignore SDCMD_FAIL_FLAG during bcm2835_finish_command (downstream [1]) > 3. remove unnecessary call to bcm2835_reset_internal > > I plan to submit them on Friday. > > [1] - https://github.com/raspberrypi/linux/commit/711cade866c9f865f9b283c9369e9486f27d1fec Should any of those changes block merging the current code, though? It doesn't sound like it to me. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 832 bytes Desc: not available URL: