From mboxrd@z Thu Jan 1 00:00:00 1970 From: eric@anholt.net (Eric Anholt) Date: Thu, 24 Dec 2015 15:45:15 -0800 Subject: [PATCH v2 1/3] clk: bcm2835: Add bindings for the auxiliary peripheral clock gates. In-Reply-To: References: <1450222559-22461-1-git-send-email-eric@anholt.net> <20151219041935.GS14936@rob-hp-laptop> Message-ID: <87wps3qulw.fsf@eliezer.anholt.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Michael Turquette writes: > On Fri, Dec 18, 2015 at 8:19 PM, Rob Herring wrote: >> On Tue, Dec 15, 2015 at 03:35:57PM -0800, Eric Anholt wrote: >>> These will be used for enabling UART1, SPI1, and SPI2. >>> >>> Signed-off-by: Eric Anholt >>> --- >>> >>> v2: Make the binding cover both the IRQ and clock enable registers. >>> >>> .../bindings/clock/brcm,bcm2835-aux-clock.txt | 31 ++++++++++++++++++++++ >>> include/dt-bindings/clock/bcm2835-aux.h | 17 ++++++++++++ >>> 2 files changed, 48 insertions(+) >>> create mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm2835-aux-clock.txt >>> create mode 100644 include/dt-bindings/clock/bcm2835-aux.h >> >> Acked-by: Rob Herring > > Applied to clk-next. > > Next time if you put the header into the clk driver patch then we can > send the binding description through the DT tree and take the header > and C file through the clk tree in one patch. I would *love* to do that, but I've previously been told that having the bindings patch reference a header file not present as of the bindings patch is not acceptable and made to change it. -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 818 bytes Desc: not available URL: