* [PATCH v9 0/7] enable hi3xxx SoC
@ 2013-08-28 13:10 Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 1/7] clk: hi3xxx: add clock support Haojian Zhuang
` (6 more replies)
0 siblings, 7 replies; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-28 13:10 UTC (permalink / raw)
To: linux-arm-kernel
v9:
1. Clean code in DTS file according to Olof's comments.
2. Since debug ll patch is going through Russell's tree, remove it
from this patch set.
v8:
1. Drop to support CLK_GATE_SEPERATED_REG in common clock gate driver.
Support this feature in hi3xxx clock driver.
2. Clean unnecessary device node in DTS.
3. Define all clocks in hi3620-clk.dtsi. And all clock nodes are defined
in the clocks node.
4. Fix the clock gate & clock mux for timer.
5. Rename timer0~4 to dual_timer0~4 in DTS file. It's used to make
name clearer.
v7:
1. Add hi3xxx_defconfig.
2. Use reg property in clock node.
3. Drop origin clock divider table.
4. Reuse clock divider register helper.
5. Reuse clock gate register helper.
6. Append CLK_GATE_SEPERATED_REG flag in order to support Hisilicon
Hi3620 SoC.
7. Rebase DEBUG_LL for Hi3xxx.
8. Add more clock node in DTS file.
v6:
1. Remove hisilicon string from properties in clock driver.
2. Replace array by pointer in clock driver. Since only sctrl parent
node exists at this time.
v5:
1. Remove HIWORD clk patches since they're merged into clk git tree.
2. Set hisilicon,clk-reset property of clkgate node is optional.
3. Update on commandline args in DTS file. Remove earlyprintk, mem, nfs.
4. Move gpio-keys out of amba node in DTS file.
v4:
1. Add clk gate with HIWORD mask for Rockchip.
2. Update comments and code of HIWORD flags for mux/divider.
3. Append a mux without HIWORD mask in Hisilicon 3620.
4. Fix the pinmux setting in Hi4511.
v3:
1. Use clk_register_mux_table().
v2:
1. Reuse mux & divider driver. So append CLK_MUX_HIWORD_MASK &
CLK_DIVIDER_HIWORD_MASK for Hi3620 SoC.
2. Fix system timer running too fast because wrong divider is choosen.
3. Remove .init_irq in DT machine descriptor.
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v9 1/7] clk: hi3xxx: add clock support
2013-08-28 13:10 [PATCH v9 0/7] enable hi3xxx SoC Haojian Zhuang
@ 2013-08-28 13:10 ` Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 2/7] ARM: hi3xxx: add board support with device tree Haojian Zhuang
` (5 subsequent siblings)
6 siblings, 0 replies; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-28 13:10 UTC (permalink / raw)
To: linux-arm-kernel
Add clock support with device tree on Hisilicon SoC.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Cc: Mike Turquette <mturquette@linaro.org>
---
.../devicetree/bindings/clock/hisilicon.txt | 118 +++++++++
drivers/clk/Makefile | 1 +
drivers/clk/hisilicon/Makefile | 2 +
drivers/clk/hisilicon/clk-hi3xxx.c | 272 +++++++++++++++++++++
drivers/clk/hisilicon/clk-hi3xxx.h | 34 +++
drivers/clk/hisilicon/clkgate-seperated.c | 129 ++++++++++
6 files changed, 556 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/hisilicon.txt
create mode 100644 drivers/clk/hisilicon/Makefile
create mode 100644 drivers/clk/hisilicon/clk-hi3xxx.c
create mode 100644 drivers/clk/hisilicon/clk-hi3xxx.h
create mode 100644 drivers/clk/hisilicon/clkgate-seperated.c
diff --git a/Documentation/devicetree/bindings/clock/hisilicon.txt b/Documentation/devicetree/bindings/clock/hisilicon.txt
new file mode 100644
index 0000000..2c42062
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hisilicon.txt
@@ -0,0 +1,118 @@
+Device Tree Clock bindings for arch-hi3xxx
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+All the mux, gate & divider are in clock container of DTS file.
+
+Required properties for mux clocks:
+ - compatible : shall be "hisilicon,clk-mux".
+ - clocks : shall be the input parent clock phandle for the clock. This should
+ be the reference clock.
+ - clock-output-names : shall be reference name.
+ - #clock-cells : from common clock binding; shall be set to 0.
+ - reg : the mux register address. It should be the offset of the container.
+ - clkmux-mask : mask bits of the mux register.
+ - clkmux-table : array of mux select bits.
+
+Optional properties for mux clocks:
+ - clkmux-hiword-mask : indicates that the bit[31:16] are the hiword mask
+ of mux selected bits (bit[15:0]). The bit[15:0] is valid only when
+ bit[31:16] is set.
+
+
+
+Required properties for gate clocks:
+ - compatible : shall be "hisilicon,clk-gate".
+ - clocks : shall be the input parent clock phandle for the clock. This should
+ be the reference clock.
+ - clock-output-names : shall be reference name.
+ - #clock-cells : from common clock binding; shall be set to 0.
+ - reg : the mux register address. It should be the offset of the container.
+ - clkgate : bit index to control the clock gate in the gate register.
+
+Optional properties for gate clocks:
+ - clkgate-inverted : it indicates that setting 0 could enable the clock gate
+ and setting 1 could disable the clock gate.
+ - clkgate-seperated-reg : it indicates that there're three continuous
+ registers (enable, disable & status) for the same clock gate.
+
+
+
+Required properties for divider clocks:
+ - compatible : shall be "hisilicon,clk-div".
+ - clocks : shall be the input parent clock phandle for the clock. This should
+ be the reference clock.
+ - clock-output-names : shall be reference name.
+ - reg : the divider register address. It should be the offset of the
+ container.
+ - clkdiv-mask : mask bits of the divider register.
+ - clkdiv-min : the minimum divider of the clock divider.
+ - clkdiv-max : the maximum divider of the clock divider.
+
+Optional properties for divider clocks:
+ - clkdiv-hiword-mask : indicates that the bit[31:16] are the hiword mask
+ of divider selected bits (bit[15:0]). The bit[15:0] is valid only when
+ bit[31:16] is set.
+
+
+
+For example:
+ sysctrl: system-controller at fc802000 {
+ compatible = "hisilicon,sysctrl";
+ reg = <0xfc802000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+
+ timer0_mux: timer0_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk01>;
+ clock-output-names = "timer0_mux";
+ reg = <0>;
+ clkmux-mask = <0x8000>;
+ clkmux-table = <0 0x8000>;
+ };
+ uart0_mux: uart0_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "uart0_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x80>;
+ /* each item value */
+ clkmux-table = <0 0x80>;
+ clkmux-hiword-mask;
+ };
+ timclk0: timclk0 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&timer0_mux>;
+ clock-output-names = "timclk0";
+ clkgate-inverted;
+ reg = <0>;
+ clkgate = <16>;
+ };
+ timerclk01: timerclk01 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&timer_rclk01>;
+ clock-output-names = "timerclk01";
+ reg = <0x20>;
+ clkgate = <0>;
+ clkgate-seperated-reg;
+ };
+ mmc1_div: mmc1_div {
+ compatible = "hisilicon,clk-div";
+ #clock-cells = <0>;
+ clocks = <&mmc1_mux>;
+ clock-output-names = "mmc1_div";
+ reg = <0x108>;
+ clkdiv-mask = <0x1e0>;
+ clkdiv-min = <1>;
+ clkdiv-max = <16>;
+ clkdiv-hiword-mask;
+ };
+ };
diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 4038c2b..2a06b5c 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -12,6 +12,7 @@ obj-$(CONFIG_COMMON_CLK) += clk-composite.o
# SoCs specific
obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o
obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
+obj-$(CONFIG_ARCH_HI3xxx) += hisilicon/
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o
obj-$(CONFIG_ARCH_MXS) += mxs/
diff --git a/drivers/clk/hisilicon/Makefile b/drivers/clk/hisilicon/Makefile
new file mode 100644
index 0000000..1ed6a3c
--- /dev/null
+++ b/drivers/clk/hisilicon/Makefile
@@ -0,0 +1,2 @@
+
+obj-y += clk-hi3xxx.o clkgate-seperated.o
diff --git a/drivers/clk/hisilicon/clk-hi3xxx.c b/drivers/clk/hisilicon/clk-hi3xxx.c
new file mode 100644
index 0000000..87ae12b
--- /dev/null
+++ b/drivers/clk/hisilicon/clk-hi3xxx.c
@@ -0,0 +1,272 @@
+/*
+ * Hisilicon Hi3xxx clock driver
+ *
+ * Copyright (c) 2012-2013 Hisilicon Limited.
+ * Copyright (c) 2012-2013 Linaro Limited.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ * Xin Li <li.xin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#include "clk-hi3xxx.h"
+
+static void __iomem *hi3xxx_clk_base = NULL;
+
+static DEFINE_SPINLOCK(hi3xxx_clk_lock);
+
+static const struct of_device_id hi3xxx_of_match[] = {
+ { .compatible = "hisilicon,sysctrl" },
+};
+
+static void __iomem __init *hi3xxx_init_clocks(struct device_node *np)
+{
+ struct device_node *parent;
+ const struct of_device_id *match;
+ void __iomem *ret = NULL;
+
+ parent = of_get_parent(np);
+ if (!parent) {
+ pr_warn("Can't find parent node of these clocks\n");
+ goto out;
+ }
+ match = of_match_node(hi3xxx_of_match, parent);
+ if (!match) {
+ pr_warn("Can't find the right parent\n");
+ goto out;
+ }
+
+ if (!hi3xxx_clk_base) {
+ ret = of_iomap(parent, 0);
+ WARN_ON(!ret);
+ hi3xxx_clk_base = ret;
+ } else {
+ ret = hi3xxx_clk_base;
+ }
+out:
+ return ret;
+}
+
+static void __init hi3xxx_clkgate_setup(struct device_node *np)
+{
+ struct clk *clk;
+ const char *clk_name, **parent_names, *name;
+ const __be32 *prop;
+ unsigned long flags = 0;
+ u32 bit_idx;
+ void __iomem *base, *reg;
+
+ base = hi3xxx_init_clocks(np);
+ if (!base)
+ goto err;
+ if (of_property_read_string(np, "clock-output-names", &clk_name))
+ goto err;
+ if (of_property_read_u32(np, "clkgate", &bit_idx))
+ goto err;
+ prop = of_get_address(np, 0, NULL, NULL);
+ if (!prop)
+ goto err;
+ reg = base + be32_to_cpu(*prop);
+
+ /* gate only has the fixed parent */
+ parent_names = kzalloc(sizeof(char *), GFP_KERNEL);
+ if (!parent_names)
+ goto err;
+ parent_names[0] = of_clk_get_parent_name(np, 0);
+
+ if (of_property_read_bool(np, "clkgate-seperated-reg")) {
+ clk = hi3xxx_register_clkgate_sep(NULL, clk_name, parent_names[0],
+ 0, reg, (u8)bit_idx, flags,
+ &hi3xxx_clk_lock);
+ } else {
+ if (of_property_read_bool(np, "clkgate-inverted"))
+ flags |= CLK_GATE_SET_TO_DISABLE;
+ clk = clk_register_gate(NULL, clk_name, parent_names[0], 0, reg,
+ (u8)bit_idx, flags, &hi3xxx_clk_lock);
+ }
+ if (IS_ERR(clk))
+ goto err_clk;
+ if (!of_property_read_string(np, "clock-names", &name))
+ clk_register_clkdev(clk, name, NULL);
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ return;
+err_clk:
+ kfree(parent_names);
+err:
+ pr_err("Fail on registering hi3xxx clkgate node.\n");
+}
+CLK_OF_DECLARE(hi3xxx_gate, "hisilicon,clk-gate", hi3xxx_clkgate_setup)
+
+static int __init hi3xxx_parse_mux(struct device_node *np,
+ u8 *num_parents,
+ u32 *table)
+{
+ int i, cnt, ret;
+
+ /* get the count of items in mux */
+ for (i = 0, cnt = 0; ; i++, cnt++) {
+ /* parent's #clock-cells property is always 0 */
+ if (!of_parse_phandle(np, "clocks", i))
+ break;
+ }
+
+ for (i = 0; i < cnt; i++) {
+ if (!of_clk_get_parent_name(np, i))
+ return -ENOENT;
+ }
+ *num_parents = cnt;
+ table = kzalloc(sizeof(u32 *) * cnt, GFP_KERNEL);
+ if (!table)
+ return -ENOMEM;
+ ret = of_property_read_u32_array(np, "clkmux-table",
+ table, cnt);
+ if (ret)
+ goto err;
+ return 0;
+err:
+ kfree(table);
+ return ret;
+}
+
+static void __init hi3xxx_clkmux_setup(struct device_node *np)
+{
+ struct clk *clk;
+ const char *clk_name, **parent_names = NULL;
+ const __be32 *prop;
+ u32 mask, *table = NULL;
+ u8 num_parents, shift, clk_mux_flags = 0;
+ void __iomem *reg, *base;
+ int i, ret;
+
+ base = hi3xxx_init_clocks(np);
+ if (!base)
+ goto err;
+ if (of_property_read_string(np, "clock-output-names", &clk_name))
+ goto err;
+ prop = of_get_address(np, 0, NULL, NULL);
+ if (!prop)
+ goto err;
+ reg = base + be32_to_cpu(*prop);
+ if (of_property_read_u32(np, "clkmux-mask", &mask))
+ goto err;
+ if (of_property_read_bool(np, "clkmux-hiword-mask"))
+ clk_mux_flags = CLK_MUX_HIWORD_MASK;
+
+ ret = hi3xxx_parse_mux(np, &num_parents, table);
+ if (ret)
+ goto err;
+
+ parent_names = kzalloc(sizeof(char *) * num_parents, GFP_KERNEL);
+ if (!parent_names)
+ goto err_table;
+ for (i = 0; i < num_parents; i++)
+ parent_names[i] = of_clk_get_parent_name(np, i);
+
+ shift = ffs(mask) - 1;
+ mask = mask >> shift;
+ clk = clk_register_mux_table(NULL, clk_name, parent_names, num_parents,
+ CLK_SET_RATE_PARENT, reg, shift, mask,
+ clk_mux_flags, table, &hi3xxx_clk_lock);
+ if (IS_ERR(clk))
+ goto err_clk;
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+
+ return;
+err_clk:
+ kfree(parent_names);
+err_table:
+ kfree(table);
+err:
+ pr_err("Fail on registering hi3xxx clkmux node.\n");
+}
+CLK_OF_DECLARE(hi3xxx_mux, "hisilicon,clk-mux", hi3xxx_clkmux_setup)
+
+static void __init hi3xxx_clkdiv_setup(struct device_node *np, int mode)
+{
+ struct clk *clk;
+ const char *clk_name, **parent_names;
+ const __be32 *prop;
+ struct clk_div_table *table;
+ unsigned int table_num;
+ u32 min, max, mask;
+ u8 shift, width, clk_div_flags = 0;
+ void __iomem *reg, *base;
+ int i;
+
+ base = hi3xxx_init_clocks(np);
+ if (!base)
+ goto err;
+
+ if (of_property_read_string(np, "clock-output-names", &clk_name))
+ goto err;
+ if (of_property_read_u32(np, "clkdiv-mask", &mask))
+ goto err;
+ if (of_property_read_u32(np, "clkdiv-min", &min))
+ goto err;
+ if (of_property_read_u32(np, "clkdiv-max", &max))
+ goto err;
+ if (of_property_read_bool(np, "clkdiv-hiword-mask"))
+ clk_div_flags = CLK_DIVIDER_HIWORD_MASK;
+
+ prop = of_get_address(np, 0, NULL, NULL);
+ if (!prop)
+ goto err;
+ reg = base + be32_to_cpu(*prop);
+
+ table_num = max - min + 1;
+ table = kzalloc(sizeof(*table) * table_num, GFP_KERNEL);
+ if (!table)
+ goto err;
+
+ for (i = 0; i < table_num; i++) {
+ table[i].div = min + i;
+ table[i].val = table[i].div - 1;
+ }
+
+ /* gate only has the fixed parent */
+ parent_names = kzalloc(sizeof(char *), GFP_KERNEL);
+ if (!parent_names)
+ goto err_par;
+ parent_names[0] = of_clk_get_parent_name(np, 0);
+ shift = ffs(mask) - 1;
+ width = fls(mask) - ffs(mask) + 1;
+ clk = clk_register_divider_table(NULL, clk_name, parent_names[0], 0,
+ reg, shift, width, clk_div_flags,
+ table, &hi3xxx_clk_lock);
+ if (IS_ERR(clk))
+ goto err_clk;
+ of_clk_add_provider(np, of_clk_src_simple_get, clk);
+ return;
+err_clk:
+ kfree(parent_names);
+err_par:
+ kfree(table);
+err:
+ pr_err("Fail on registering hi3xxx clkdiv node\n");
+}
+CLK_OF_DECLARE(hi3xxx_div, "hisilicon,clk-div", hi3xxx_clkdiv_setup)
diff --git a/drivers/clk/hisilicon/clk-hi3xxx.h b/drivers/clk/hisilicon/clk-hi3xxx.h
new file mode 100644
index 0000000..52c4d22
--- /dev/null
+++ b/drivers/clk/hisilicon/clk-hi3xxx.h
@@ -0,0 +1,34 @@
+/*
+ * Hisilicon Hi3620 clock gate driver
+ *
+ * Copyright (c) 2012-2013 Hisilicon Limited.
+ * Copyright (c) 2012-2013 Linaro Limited.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ * Xin Li <li.xin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#ifndef __HI3XXX_CLKGATE_SEPERATED
+#define __HI3XXX_CLKGATE_SEPERATED
+
+extern struct clk *hi3xxx_register_clkgate_sep(struct device *, const char *,
+ const char *, unsigned long,
+ void __iomem *, u8,
+ u8, spinlock_t *);
+
+#endif /* __HI3XXX_CLKGATE_SEPERATED */
diff --git a/drivers/clk/hisilicon/clkgate-seperated.c b/drivers/clk/hisilicon/clkgate-seperated.c
new file mode 100644
index 0000000..1d7b0da
--- /dev/null
+++ b/drivers/clk/hisilicon/clkgate-seperated.c
@@ -0,0 +1,129 @@
+/*
+ * Hisilicon Hi3620 clock gate driver
+ *
+ * Copyright (c) 2012-2013 Hisilicon Limited.
+ * Copyright (c) 2012-2013 Linaro Limited.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ * Xin Li <li.xin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/clk-provider.h>
+#include <linux/clkdev.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/clk.h>
+
+#include "clk-hi3xxx.h"
+
+/* Hi3620 clock gate register offset */
+#define CLKGATE_SEPERATED_ENABLE 0x0
+#define CLKGATE_SEPERATED_DISABLE 0x4
+#define CLKGATE_SEPERATED_STATUS 0x8
+
+struct clkgate_seperated {
+ struct clk_hw hw;
+ void __iomem *enable; /* enable register */
+ u8 bit_idx; /* bits in enable/disable register */
+ u8 flags;
+ spinlock_t *lock;
+};
+
+static int clkgate_seperated_enable(struct clk_hw *hw)
+{
+ struct clkgate_seperated *sclk;
+ unsigned long flags = 0;
+ u32 reg;
+
+ sclk = container_of(hw, struct clkgate_seperated, hw);
+ if (sclk->lock)
+ spin_lock_irqsave(sclk->lock, flags);
+ reg = BIT(sclk->bit_idx);
+ writel_relaxed(reg, sclk->enable);
+ readl_relaxed(sclk->enable + CLKGATE_SEPERATED_STATUS);
+ if (sclk->lock)
+ spin_unlock_irqrestore(sclk->lock, flags);
+ return 0;
+}
+
+static void clkgate_seperated_disable(struct clk_hw *hw)
+{
+ struct clkgate_seperated *sclk;
+ unsigned long flags = 0;
+ u32 reg;
+
+ sclk = container_of(hw, struct clkgate_seperated, hw);
+ if (sclk->lock)
+ spin_lock_irqsave(sclk->lock, flags);
+ reg = BIT(sclk->bit_idx);
+ writel_relaxed(reg, sclk->enable + CLKGATE_SEPERATED_DISABLE);
+ readl_relaxed(sclk->enable + CLKGATE_SEPERATED_STATUS);
+ if (sclk->lock)
+ spin_unlock_irqrestore(sclk->lock, flags);
+}
+
+static int clkgate_seperated_is_enabled(struct clk_hw *hw)
+{
+ struct clkgate_seperated *sclk;
+ u32 reg;
+
+ sclk = container_of(hw, struct clkgate_seperated, hw);
+ reg = readl_relaxed(sclk->enable + CLKGATE_SEPERATED_STATUS);
+ reg &= BIT(sclk->bit_idx);
+
+ return reg ? 1 : 0;
+}
+
+static struct clk_ops clkgate_seperated_ops = {
+ .enable = clkgate_seperated_enable,
+ .disable = clkgate_seperated_disable,
+ .is_enabled = clkgate_seperated_is_enabled,
+};
+
+struct clk *hi3xxx_register_clkgate_sep(struct device *dev, const char *name,
+ const char *parent_name, unsigned long flags,
+ void __iomem *reg, u8 bit_idx,
+ u8 clk_gate_flags, spinlock_t *lock)
+{
+ struct clkgate_seperated *sclk;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ sclk = kzalloc(sizeof(struct clkgate_seperated), GFP_KERNEL);
+ if (!sclk) {
+ pr_err("%s: fail to allocate seperated gated clk\n", __func__);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ init.name = name;
+ init.ops = &clkgate_seperated_ops;
+ init.flags = flags | CLK_IS_BASIC;
+ init.parent_names = (parent_name ? &parent_name : NULL);
+ init.num_parents = (parent_name ? 1 : 0);
+
+ sclk->enable = reg + CLKGATE_SEPERATED_ENABLE;
+ sclk->bit_idx = bit_idx;
+ sclk->flags = clk_gate_flags;
+ sclk->hw.init = &init;
+
+ clk = clk_register(dev, &sclk->hw);
+ if (IS_ERR(clk))
+ kfree(sclk);
+ return clk;
+}
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v9 2/7] ARM: hi3xxx: add board support with device tree
2013-08-28 13:10 [PATCH v9 0/7] enable hi3xxx SoC Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 1/7] clk: hi3xxx: add clock support Haojian Zhuang
@ 2013-08-28 13:10 ` Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 3/7] ARM: dts: enable hi4511 " Haojian Zhuang
` (4 subsequent siblings)
6 siblings, 0 replies; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-28 13:10 UTC (permalink / raw)
To: linux-arm-kernel
Add board support with device tree for Hisilicon Hi36xx/Hi37xx platform.
Changelog:
v3:
1. Remove .map_io() in DT machine descriptor. Since debug_ll_io_init()
is called by default.
2. Remove .init_machine() in DT machine descriptor. Since
of_platform_populate() is called by default in DT mode.
v2:
1. Remove .init_irq() in DT machine descriptor. Since irqchip_init()
is called by default in DT mode.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
.../bindings/arm/hisilicon/hisilicon.txt | 10 ++++++
arch/arm/Kconfig | 2 ++
arch/arm/Makefile | 1 +
arch/arm/mach-hi3xxx/Kconfig | 12 ++++++++
arch/arm/mach-hi3xxx/Makefile | 5 +++
arch/arm/mach-hi3xxx/hi3xxx.c | 36 ++++++++++++++++++++++
6 files changed, 66 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
create mode 100644 arch/arm/mach-hi3xxx/Kconfig
create mode 100644 arch/arm/mach-hi3xxx/Makefile
create mode 100644 arch/arm/mach-hi3xxx/hi3xxx.c
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
new file mode 100644
index 0000000..3be60c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -0,0 +1,10 @@
+Hisilicon Platforms Device Tree Bindings
+----------------------------------------------------
+
+Hi3716 Development Board
+Required root node properties:
+ - compatible = "hisilicon,hi3716-dkb";
+
+Hi4511 Board
+Required root node properties:
+ - compatible = "hisilicon,hi3620-hi4511";
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ba412e0..29e119d 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -944,6 +944,8 @@ source "arch/arm/mach-footbridge/Kconfig"
source "arch/arm/mach-gemini/Kconfig"
+source "arch/arm/mach-hi3xxx/Kconfig"
+
source "arch/arm/mach-highbank/Kconfig"
source "arch/arm/mach-integrator/Kconfig"
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index c0ac0f5..bc69205 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -154,6 +154,7 @@ machine-$(CONFIG_ARCH_DOVE) += dove
machine-$(CONFIG_ARCH_EBSA110) += ebsa110
machine-$(CONFIG_ARCH_EP93XX) += ep93xx
machine-$(CONFIG_ARCH_GEMINI) += gemini
+machine-$(CONFIG_ARCH_HI3xxx) += hi3xxx
machine-$(CONFIG_ARCH_HIGHBANK) += highbank
machine-$(CONFIG_ARCH_INTEGRATOR) += integrator
machine-$(CONFIG_ARCH_IOP13XX) += iop13xx
diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig
new file mode 100644
index 0000000..68bd26c
--- /dev/null
+++ b/arch/arm/mach-hi3xxx/Kconfig
@@ -0,0 +1,12 @@
+config ARCH_HI3xxx
+ bool "Hisilicon Hi36xx/Hi37xx family" if ARCH_MULTI_V7
+ select ARM_AMBA
+ select ARM_GIC
+ select ARM_TIMER_SP804
+ select CACHE_L2X0
+ select CLKSRC_OF
+ select GENERIC_CLOCKEVENTS
+ select PINCTRL
+ select PINCTRL_SINGLE
+ help
+ Support for Hisilicon Hi36xx/Hi37xx processor family
diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile
new file mode 100644
index 0000000..d68ebb3
--- /dev/null
+++ b/arch/arm/mach-hi3xxx/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for Hisilicon Hi36xx/Hi37xx processors line
+#
+
+obj-y += hi3xxx.o
diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c
new file mode 100644
index 0000000..e7c54bc
--- /dev/null
+++ b/arch/arm/mach-hi3xxx/hi3xxx.c
@@ -0,0 +1,36 @@
+/*
+ * (Hisilicon's Hi36xx/Hi37xx SoC based) flattened device tree enabled machine
+ *
+ * Copyright (c) 2012-2013 Hisilicon Ltd.
+ * Copyright (c) 2012-2013 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/clk-provider.h>
+#include <linux/clocksource.h>
+#include <linux/irqchip.h>
+#include <linux/of_platform.h>
+
+#include <asm/mach/arch.h>
+#include <asm/mach/map.h>
+
+static void __init hi3xxx_timer_init(void)
+{
+ of_clk_init(NULL);
+ clocksource_of_init();
+}
+
+static const char *hs_compat[] __initdata = {
+ "hisilicon,hi3620-hi4511",
+ NULL,
+};
+
+DT_MACHINE_START(HI3xxx, "Hisilicon Hi36xx/Hi37xx (Flattened Device Tree)")
+ .init_time = hi3xxx_timer_init,
+ .dt_compat = hs_compat,
+MACHINE_END
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v9 3/7] ARM: dts: enable hi4511 with device tree
2013-08-28 13:10 [PATCH v9 0/7] enable hi3xxx SoC Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 1/7] clk: hi3xxx: add clock support Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 2/7] ARM: hi3xxx: add board support with device tree Haojian Zhuang
@ 2013-08-28 13:10 ` Haojian Zhuang
2013-08-29 18:13 ` Kevin Hilman
2013-08-28 13:10 ` [PATCH v9 4/7] ARM: config: enable hi3xxx in multi_v7_defconfig Haojian Zhuang
` (3 subsequent siblings)
6 siblings, 1 reply; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-28 13:10 UTC (permalink / raw)
To: linux-arm-kernel
Enable Hisilicon Hi4511 development platform with device tree support.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/hi3620-clk.dtsi | 1058 +++++++++++++++++++++++++++++++++++++
arch/arm/boot/dts/hi3620.dtsi | 513 ++++++++++++++++++
arch/arm/boot/dts/hi4511.dts | 648 +++++++++++++++++++++++
4 files changed, 2220 insertions(+)
create mode 100644 arch/arm/boot/dts/hi3620-clk.dtsi
create mode 100644 arch/arm/boot/dts/hi3620.dtsi
create mode 100644 arch/arm/boot/dts/hi4511.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 641b3c9..6e7c1ca 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -61,6 +61,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos5250-snow.dtb \
exynos5420-smdk5420.dtb \
exynos5440-ssdk5440.dtb
+dtb-$(CONFIG_ARCH_HI3xxx) += hi4511.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
ecx-2000.dtb
dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
diff --git a/arch/arm/boot/dts/hi3620-clk.dtsi b/arch/arm/boot/dts/hi3620-clk.dtsi
new file mode 100644
index 0000000..78307c6
--- /dev/null
+++ b/arch/arm/boot/dts/hi3620-clk.dtsi
@@ -0,0 +1,1058 @@
+/*
+ * Hisilicon Ltd. Hi3620 SoC
+ *
+ * Copyright (C) 2012-2013 Hisilicon Ltd.
+ * Copyright (C) 2012-2013 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/ {
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc32k: osc32k {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "osc32khz";
+ };
+ osc26m: osc26m {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "osc26mhz";
+ };
+ pclk: pclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "apb_pclk";
+ };
+ pll_arm0: pll_arm0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1600000000>;
+ clock-output-names = "armpll0";
+ };
+ pll_arm1: pll_arm1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1600000000>;
+ clock-output-names = "armpll1";
+ };
+ pll_peri: pll_peri {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1440000000>;
+ clock-output-names = "armpll2";
+ };
+ pll_usb: pll_usb {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1440000000>;
+ clock-output-names = "armpll3";
+ };
+ pll_hdmi: pll_hdmi {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1188000000>;
+ clock-output-names = "armpll4";
+ };
+ pll_gpu: pll_gpu {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1300000000>;
+ clock-output-names = "armpll5";
+ };
+ rclk_tcxo: rclk_tcxo {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&osc26m>;
+ clock-output-names = "rclk_tcxo";
+ clock-mult = <1>;
+ clock-div = <4>;
+ };
+ rclk_cfgaxi: rclk_cfgaxi {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&pll_peri>;
+ clock-output-names = "rclk_cfgaxi";
+ clock-mult = <1>;
+ clock-div = <30>;
+ };
+ rclk_pico: rclk_pico {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <0>;
+ clocks = <&hsic_div>;
+ clock-output-names = "rclk_pico";
+ clock-mult = <1>;
+ clock-div = <40>;
+ };
+
+ sysctrl: system-controller at fc802000 {
+ compatible = "hisilicon,sysctrl";
+ reg = <0xfc802000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ timer0_mux: timer0_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk01>;
+ clock-output-names = "timer0_mux";
+ reg = <0>;
+ clkmux-mask = <0x18000>;
+ clkmux-table = <0 0x8000>;
+ };
+ timer1_mux: timer1_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk01>;
+ clock-output-names = "timer1_mux";
+ reg = <0>;
+ clkmux-mask = <0x60000>;
+ clkmux-table = <0 0x20000>;
+ };
+ timer2_mux: timer2_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk23>;
+ clock-output-names = "timer2_mux";
+ reg = <0>;
+ clkmux-mask = <0x180000>;
+ clkmux-table = <0 0x80000>;
+ };
+ timer3_mux: timer3_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk23>;
+ clock-output-names = "timer3_mux";
+ reg = <0>;
+ clkmux-mask = <0x600000>;
+ clkmux-table = <0 0x200000>;
+ };
+ timer4_mux: timer4_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk45>;
+ clock-output-names = "timer4_mux";
+ reg = <0x18>;
+ clkmux-mask = <0x3>;
+ clkmux-table = <0 0x1>;
+ };
+ timer5_mux: timer5_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk45>;
+ clock-output-names = "timer5_mux";
+ reg = <0x18>;
+ clkmux-mask = <0xc>;
+ clkmux-table = <0 0x4>;
+ };
+ timer6_mux: timer6_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk67>;
+ clock-output-names = "timer6_mux";
+ reg = <0x18>;
+ clkmux-mask = <0x30>;
+ clkmux-table = <0 0x10>;
+ };
+ timer7_mux: timer7_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk67>;
+ clock-output-names = "timer7_mux";
+ reg = <0x18>;
+ clkmux-mask = <0xc0>;
+ clkmux-table = <0 0x40>;
+ };
+ timer8_mux: timer8_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk89>;
+ clock-output-names = "timer8_mux";
+ reg = <0x18>;
+ clkmux-mask = <0x300>;
+ clkmux-table = <0 0x100>;
+ };
+ timer9_mux: timer9_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &timerclk89>;
+ clock-output-names = "timer9_mux";
+ reg = <0x18>;
+ clkmux-mask = <0xc00>;
+ clkmux-table = <0 0x400>;
+ };
+ uart0_mux: uart0_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "uart0_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x80>;
+ /* each item value */
+ clkmux-table = <0 0x80>;
+ clkmux-hiword-mask;
+ };
+ uart1_mux: uart1_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "uart1_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x100>;
+ clkmux-table = <0x0 0x100>;
+ clkmux-hiword-mask;
+ };
+ uart2_mux: uart2_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "uart2_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x200>;
+ clkmux-table = <0 0x200>;
+ clkmux-hiword-mask;
+ };
+ uart3_mux: uart3_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "uart3_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x400>;
+ clkmux-table = <0 0x400>;
+ clkmux-hiword-mask;
+ };
+ uart4_mux: uart4_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &pclk>;
+ clock-output-names = "uart4_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x800>;
+ clkmux-table = <0 0x800>;
+ clkmux-hiword-mask;
+ };
+ spi0_mux: spi0_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &rclk_cfgaxi>;
+ clock-output-names = "spi0_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x1000>;
+ clkmux-table = <0 0x1000>;
+ clkmux-hiword-mask;
+ };
+ spi1_mux: spi1_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &rclk_cfgaxi>;
+ clock-output-names = "spi1_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x2000>;
+ clkmux-table = <0 0x2000>;
+ clkmux-hiword-mask;
+ };
+ spi2_mux: spi2_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &rclk_cfgaxi>;
+ clock-output-names = "spi2_mux";
+ reg = <0x100>;
+ clkmux-mask = <0x4000>;
+ clkmux-table = <0 0x4000>;
+ clkmux-hiword-mask;
+ };
+ rclk_shareAXI: rclk_shareAXI {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_usb &pll_peri>;
+ clock-output-names = "rclk_shareAXI";
+ reg = <0x100>;
+ clkmux-mask = <0x8000>;
+ clkmux-table = <0 0x8000>;
+ clkmux-hiword-mask;
+ };
+ pwm0_mux: pwm0_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &osc26m>;
+ clock-output-names = "pwm0_mux";
+ reg = <0x104>;
+ clkmux-mask = <0x400>;
+ clkmux-table = <0 0x400>;
+ clkmux-hiword-mask;
+ };
+ pwm1_mux: pwm1_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc32k &osc26m>;
+ clock-output-names = "pwm1_mux";
+ reg = <0x104>;
+ clkmux-mask = <0x800>;
+ clkmux-table = <0 0x800>;
+ clkmux-hiword-mask;
+ };
+ sd_mux: sd_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_usb &pll_peri>;
+ clock-output-names = "sd_mux";
+ reg = <0x108>;
+ clkmux-mask = <0x10>;
+ clkmux-table = <0 0x10>;
+ clkmux-hiword-mask;
+ };
+ mmc1_mux: mmc1_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_usb &pll_peri>;
+ clock-output-names = "mmc1_mux";
+ reg = <0x108>;
+ clkmux-mask = <0x200>;
+ clkmux-table = <0 0x200>;
+ clkmux-hiword-mask;
+ };
+ rclk_mmc1_mux: rclk_mmc1_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&osc26m &mmc1_div>;
+ clock-output-names = "rclk_mmc1_mux";
+ reg = <0x108>;
+ clkmux-mask = <0x400>;
+ clkmux-table = <0 0x400>;
+ clkmux-hiword-mask;
+ };
+ g2d_mux: g2d_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_peri &pll_usb>;
+ clock-output-names = "g2d_mux";
+ reg = <0x10c>;
+ clkmux-mask = <0x20>;
+ clkmux-table = <0 0x20>;
+ clkmux-hiword-mask;
+ };
+ venc_mux: venc_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_peri &pll_usb>;
+ clock-output-names = "venc_mux";
+ reg = <0x10c>;
+ clkmux-mask = <0x800>;
+ clkmux-table = <0 0x800>;
+ clkmux-hiword-mask;
+ };
+ vdec_mux: vdec_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_peri &pll_usb>;
+ clock-output-names = "vdec_mux";
+ reg = <0x110>;
+ clkmux-mask = <0x20>;
+ clkmux-table = <0 0x20>;
+ clkmux-hiword-mask;
+ };
+ vpp_mux: vpp_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_peri &pll_usb>;
+ clock-output-names = "vpp_mux";
+ reg = <0x110>;
+ clkmux-mask = <0x800>;
+ clkmux-table = <0 0x800>;
+ clkmux-hiword-mask;
+ };
+ edc0_mux: edc0_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_peri &pll_usb>;
+ clock-output-names = "edc0_mux";
+ reg = <0x114>;
+ clkmux-mask = <0x40>;
+ clkmux-table = <0 0x40>;
+ clkmux-hiword-mask;
+ };
+ ldi0_mux: ldi0_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_peri &pll_hdmi &pll_usb &pll_gpu>;
+ clock-output-names = "ldi0_mux";
+ reg = <0x114>;
+ clkmux-mask = <0x6000>;
+ clkmux-table = <0 0x2000 0x4000 0x6000>;
+ clkmux-hiword-mask;
+ };
+ edc1_mux: edc1_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_peri &pll_usb>;
+ clock-output-names = "edc1_mux";
+ reg = <0x118>;
+ clkmux-mask = <0x40>;
+ clkmux-table = <0 0x40>;
+ clkmux-hiword-mask;
+ };
+ ldi1_mux: ldi1_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_peri &pll_hdmi &pll_usb &pll_gpu>;
+ clock-output-names = "ldi1_mux";
+ reg = <0x118>;
+ clkmux-mask = <0xc000>;
+ clkmux-table = <0 0x4000 0x8000 0xc000>;
+ clkmux-hiword-mask;
+ };
+ rclk_hsic: rclk_hsic {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_usb &pll_peri>;
+ clock-output-names = "rclk_hsic";
+ reg = <0x130>;
+ clkmux-mask = <0x4>;
+ clkmux-table = <0 0x4>;
+ clkmux-hiword-mask;
+ };
+ mmc2_mux: mmc2_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_usb &pll_peri>;
+ clock-output-names = "mmc2_mux";
+ reg = <0x140>;
+ clkmux-mask = <0x10>;
+ clkmux-table = <0 0x10>;
+ clkmux-hiword-mask;
+ };
+ mmc3_mux: mmc3_mux {
+ compatible = "hisilicon,clk-mux";
+ #clock-cells = <0>;
+ clocks = <&pll_usb &pll_peri>;
+ clock-output-names = "mmc3_mux";
+ reg = <0x140>;
+ clkmux-mask = <0x200>;
+ clkmux-table = <0 0x200>;
+ clkmux-hiword-mask;
+ };
+
+ shareaxi_div: shareaxi_div {
+ compatible = "hisilicon,clk-div";
+ #clock-cells = <0>;
+ clocks = <&rclk_shareAXI>;
+ clock-output-names = "shareaxi_div";
+ reg = <0x100>;
+ clkdiv-mask = <0x1f>;
+ clkdiv-min = <1>;
+ clkdiv-max = <32>;
+ clkdiv-hiword-mask;
+ };
+ cfgaxi_div: cfgaxi_div {
+ compatible = "hisilicon,clk-div";
+ #clock-cells = <0>;
+ clocks = <&shareaxi_div>;
+ clock-output-names = "cfgaxi_div";
+ reg = <0x100>;
+ clkdiv-mask = <0x60>;
+ clkdiv-min = <2>;
+ clkdiv-max = <2>;
+ clkdiv-hiword-mask;
+ };
+ sd_div: sd_div {
+ compatible = "hisilicon,clk-div";
+ #clock-cells = <0>;
+ clocks = <&sd_mux>;
+ clock-output-names = "sd_div";
+ reg = <0x108>;
+ clkdiv-mask = <0xf>;
+ clkdiv-min = <1>;
+ clkdiv-max = <16>;
+ clkdiv-hiword-mask;
+ };
+ mmc1_div: mmc1_div {
+ compatible = "hisilicon,clk-div";
+ #clock-cells = <0>;
+ clocks = <&mmc1_mux>;
+ clock-output-names = "mmc1_div";
+ reg = <0x108>;
+ clkdiv-mask = <0x1e0>;
+ clkdiv-min = <1>;
+ clkdiv-max = <16>;
+ clkdiv-hiword-mask;
+ };
+ hsic_div: hsic_div {
+ compatible = "hisilicon,clk-div";
+ #clock-cells = <0>;
+ clocks = <&rclk_hsic>;
+ clock-output-names = "hsic_div";
+ reg = <0x130>;
+ clkdiv-mask = <0x3>;
+ clkdiv-min = <1>;
+ clkdiv-max = <4>;
+ clkdiv-hiword-mask;
+ };
+ mmc2_div: mmc2_div {
+ compatible = "hisilicon,clk-div";
+ #clock-cells = <0>;
+ clocks = <&mmc1_mux>;
+ clock-output-names = "mmc2_div";
+ reg = <0x140>;
+ clkdiv-mask = <0xf>;
+ clkdiv-min = <1>;
+ clkdiv-max = <16>;
+ clkdiv-hiword-mask;
+ };
+ mmc3_div: mmc3_div {
+ compatible = "hisilicon,clk-div";
+ #clock-cells = <0>;
+ clocks = <&mmc1_mux>;
+ clock-output-names = "mmc3_div";
+ reg = <0x140>;
+ clkdiv-mask = <0x1e0>;
+ clkdiv-min = <1>;
+ clkdiv-max = <16>;
+ clkdiv-hiword-mask;
+ };
+
+ timerclk01: timerclk01 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&timer_rclk01>;
+ clock-output-names = "timerclk01";
+ reg = <0x20>;
+ clkgate = <0>;
+ clkgate-seperated-reg;
+ };
+ timer_rclk01: timer_rclk01 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_tcxo>;
+ clock-output-names = "timer_rclk01";
+ reg = <0x20>;
+ clkgate = <1>;
+ clkgate-seperated-reg;
+ };
+ timerclk23: timerclk23 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&timer_rclk23>;
+ clock-output-names = "timerclk23";
+ reg = <0x20>;
+ clkgate = <2>;
+ clkgate-seperated-reg;
+ };
+ timer_rclk23: timer_rclk23 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_tcxo>;
+ clock-output-names = "timer_rclk23";
+ reg = <0x20>;
+ clkgate = <3>;
+ clkgate-seperated-reg;
+ };
+ rtcclk: rtcclk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "rtcclk";
+ reg = <0x20>;
+ clkgate = <5>;
+ clkgate-seperated-reg;
+ };
+ kpc_clk: kpc_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "kpc_clk";
+ reg = <0x20>;
+ clkgate = <6>;
+ clkgate-seperated-reg;
+ };
+ gpioclk0: gpioclk0 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk0";
+ reg = <0x20>;
+ clkgate = <8>;
+ clkgate-seperated-reg;
+ };
+ gpioclk1: gpioclk1 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk1";
+ reg = <0x20>;
+ clkgate = <9>;
+ clkgate-seperated-reg;
+ };
+ gpioclk2: gpioclk2 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk2";
+ reg = <0x20>;
+ clkgate = <10>;
+ clkgate-seperated-reg;
+ };
+ gpioclk3: gpioclk3 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk3";
+ reg = <0x20>;
+ clkgate = <11>;
+ clkgate-seperated-reg;
+ };
+ gpioclk4: gpioclk4 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk4";
+ reg = <0x20>;
+ clkgate = <12>;
+ clkgate-seperated-reg;
+ };
+ gpioclk5: gpioclk5 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk5";
+ reg = <0x20>;
+ clkgate = <13>;
+ clkgate-seperated-reg;
+ };
+ gpioclk6: gpioclk6 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk6";
+ reg = <0x20>;
+ clkgate = <14>;
+ clkgate-seperated-reg;
+ };
+ gpioclk7: gpioclk7 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk7";
+ reg = <0x20>;
+ clkgate = <15>;
+ clkgate-seperated-reg;
+ };
+ gpioclk8: gpioclk8 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk8";
+ reg = <0x20>;
+ clkgate = <16>;
+ clkgate-seperated-reg;
+ };
+ gpioclk9: gpioclk9 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk9";
+ reg = <0x20>;
+ clkgate = <17>;
+ clkgate-seperated-reg;
+ };
+ gpioclk10: gpioclk10 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk10";
+ reg = <0x20>;
+ clkgate = <18>;
+ clkgate-seperated-reg;
+ };
+ gpioclk11: gpioclk11 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk11";
+ reg = <0x20>;
+ clkgate = <19>;
+ clkgate-seperated-reg;
+ };
+ gpioclk12: gpioclk12 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk12";
+ reg = <0x20>;
+ clkgate = <20>;
+ clkgate-seperated-reg;
+ };
+ gpioclk13: gpioclk13 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk13";
+ reg = <0x20>;
+ clkgate = <21>;
+ clkgate-seperated-reg;
+ };
+ gpioclk14: gpioclk14 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk14";
+ reg = <0x20>;
+ clkgate = <22>;
+ clkgate-seperated-reg;
+ };
+ gpioclk15: gpioclk15 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk15";
+ reg = <0x20>;
+ clkgate = <23>;
+ clkgate-seperated-reg;
+ };
+ gpioclk16: gpioclk16 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk16";
+ reg = <0x20>;
+ clkgate = <24>;
+ clkgate-seperated-reg;
+ };
+ gpioclk17: gpioclk17 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk17";
+ reg = <0x20>;
+ clkgate = <25>;
+ clkgate-seperated-reg;
+ };
+ gpioclk18: gpioclk18 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk18";
+ reg = <0x20>;
+ clkgate = <26>;
+ clkgate-seperated-reg;
+ };
+ gpioclk19: gpioclk19 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk19";
+ reg = <0x20>;
+ clkgate = <27>;
+ clkgate-seperated-reg;
+ };
+ gpioclk20: gpioclk20 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk20";
+ reg = <0x20>;
+ clkgate = <28>;
+ clkgate-seperated-reg;
+ };
+ gpioclk21: gpioclk21 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "gpioclk21";
+ reg = <0x20>;
+ clkgate = <29>;
+ clkgate-seperated-reg;
+ };
+ dphy0_clk: dphy0_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&osc26m>;
+ clock-output-names = "dphy0_clk";
+ reg = <0x30>;
+ clkgate = <15>;
+ clkgate-seperated-reg;
+ };
+ dphy1_clk: dphy1_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&osc26m>;
+ clock-output-names = "dphy1_clk";
+ reg = <0x30>;
+ clkgate = <16>;
+ clkgate-seperated-reg;
+ };
+ dphy2_clk: dphy2_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&osc26m>;
+ clock-output-names = "dphy2_clk";
+ reg = <0x30>;
+ clkgate = <17>;
+ clkgate-seperated-reg;
+ };
+ usbpicophy_clk: usbpicophy_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_pico>;
+ clock-output-names = "usbpicophy_clk";
+ reg = <0x30>;
+ clkgate = <24>;
+ clkgate-seperated-reg;
+ };
+ acp_clk: acp_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_cfgaxi>;
+ clock-output-names = "acp_clk";
+ reg = <0x30>;
+ clkgate = <28>;
+ clkgate-seperated-reg;
+ };
+ timerclk45: timerclk45 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_tcxo>;
+ clock-output-names = "timerclk45";
+ reg = <0x40>;
+ clkgate = <3>;
+ clkgate-seperated-reg;
+ };
+ timerclk67: timerclk67 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_tcxo>;
+ clock-output-names = "timerclk67";
+ reg = <0x40>;
+ clkgate = <4>;
+ clkgate-seperated-reg;
+ };
+ timerclk89: timerclk89 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_tcxo>;
+ clock-output-names = "timerclk89";
+ reg = <0x40>;
+ clkgate = <5>;
+ clkgate-seperated-reg;
+ };
+ pwmclk0: pwmclk0 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pwm0_mux>;
+ clock-output-names = "pwmclk0";
+ reg = <0x40>;
+ clkgate = <7>;
+ clkgate-seperated-reg;
+ };
+ pwmclk1: pwmclk1 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pwm1_mux>;
+ clock-output-names = "pwmclk1";
+ reg = <0x40>;
+ clkgate = <8>;
+ clkgate-seperated-reg;
+ };
+ uartclk0: uartclk0 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&uart0_mux>;
+ clock-output-names = "uartclk0";
+ reg = <0x40>;
+ clkgate = <16>;
+ clkgate-seperated-reg;
+ };
+ uartclk1: uartclk1 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&uart1_mux>;
+ clock-output-names = "uartclk1";
+ reg = <0x40>;
+ clkgate = <17>;
+ clkgate-seperated-reg;
+ };
+ uartclk2: uartclk2 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&uart2_mux>;
+ clock-output-names = "uartclk2";
+ reg = <0x40>;
+ clkgate = <18>;
+ clkgate-seperated-reg;
+ };
+ uartclk3: uartclk3 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&uart3_mux>;
+ clock-output-names = "uartclk3";
+ reg = <0x40>;
+ clkgate = <19>;
+ clkgate-seperated-reg;
+ };
+ uartclk4: uartclk4 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&uart4_mux>;
+ clock-output-names = "uartclk4";
+ reg = <0x40>;
+ clkgate = <20>;
+ clkgate-seperated-reg;
+ };
+ spiclk0: spiclk0 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&spi0_mux>;
+ clock-output-names = "spiclk0";
+ reg = <0x40>;
+ clkgate = <21>;
+ clkgate-seperated-reg;
+ };
+ spiclk1: spiclk1 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&spi1_mux>;
+ clock-output-names = "spiclk1";
+ reg = <0x40>;
+ clkgate = <22>;
+ clkgate-seperated-reg;
+ };
+ spiclk2: spiclk2 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&spi2_mux>;
+ clock-output-names = "spiclk2";
+ reg = <0x40>;
+ clkgate = <23>;
+ clkgate-seperated-reg;
+ };
+ i2cclk0: i2cclk0 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "i2cclk0";
+ reg = <0x40>;
+ clkgate = <24>;
+ clkgate-seperated-reg;
+ };
+ i2cclk1: i2cclk1 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "i2cclk1";
+ reg = <0x40>;
+ clkgate = <25>;
+ clkgate-seperated-reg;
+ };
+ sci_clk: sci_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&osc26m>;
+ clock-output-names = "sci_clk";
+ reg = <0x40>;
+ clkgate = <26>;
+ clkgate-seperated-reg;
+ };
+ i2cclk2: i2cclk2 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "i2cclk2";
+ reg = <0x40>;
+ clkgate = <28>;
+ clkgate-seperated-reg;
+ };
+ i2cclk3: i2cclk3 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&pclk>;
+ clock-output-names = "i2cclk3";
+ reg = <0x40>;
+ clkgate = <29>;
+ clkgate-seperated-reg;
+ };
+ ddrc_per_clk: ddrc_per_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_cfgaxi>;
+ clock-output-names = "ddrc_per_clk";
+ reg = <0x50>;
+ clkgate = <9>;
+ clkgate-seperated-reg;
+ };
+ dmac_clk: dmac_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_cfgaxi>;
+ clock-output-names = "dmac_clk";
+ reg = <0x50>;
+ clkgate = <10>;
+ clkgate-seperated-reg;
+ };
+ usb2dvc_clk: usb2dvc_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_cfgaxi>;
+ clock-output-names = "usb2dvc_clk";
+ reg = <0x50>;
+ clkgate = <10>;
+ clkgate-seperated-reg;
+ };
+ sd_clk: sd_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&sd_div>;
+ clock-output-names = "sd_clk";
+ reg = <0x50>;
+ clkgate = <20>;
+ clkgate-seperated-reg;
+ };
+ mmc_clk1: mmc_clk1 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&rclk_mmc1_mux>;
+ clock-output-names = "mmc_clk1";
+ reg = <0x50>;
+ clkgate = <21>;
+ clkgate-seperated-reg;
+ };
+ mmc_clk2: mmc_clk2 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&mmc2_div>;
+ clock-output-names = "mmc_clk2";
+ reg = <0x50>;
+ clkgate = <22>;
+ clkgate-seperated-reg;
+ };
+ mmc_clk3: mmc_clk3 {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&mmc3_div>;
+ clock-output-names = "mmc_clk3";
+ reg = <0x50>;
+ clkgate = <23>;
+ clkgate-seperated-reg;
+ };
+ mcu_clk: mcu_clk {
+ compatible = "hisilicon,clk-gate";
+ #clock-cells = <0>;
+ clocks = <&acp_clk>;
+ clock-output-names = "mcu_clk";
+ reg = <0x50>;
+ clkgate = <24>;
+ clkgate-seperated-reg;
+ };
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
new file mode 100644
index 0000000..e05c65c
--- /dev/null
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -0,0 +1,513 @@
+/*
+ * Hisilicon Ltd. Hi3620 SoC
+ *
+ * Copyright (C) 2012-2013 Hisilicon Ltd.
+ * Copyright (C) 2012-2013 Linaro Ltd.
+ *
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/include/ "skeleton.dtsi"
+
+/include/ "hi3620-clk.dtsi"
+
+/ {
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu at 0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0xfc10000 0x100000>;
+ interrupts = <0 15 4>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ gic: interrupt-controller at fc001000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ /* gic dist base, gic cpu base */
+ reg = <0xfc001000 0x1000>, <0xfc000100 0x100>;
+ };
+
+ dual_timer0: dual_timer at fc800000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfc800000 0x1000>;
+ /* timer00 & timer01 */
+ interrupts = <0 0 4>, <0 1 4>;
+ clocks = <&timer0_mux &timer1_mux>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ dual_timer1: dual_timer at fc801000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfc801000 0x1000>;
+ /* timer10 & timer11 */
+ interrupts = <0 2 4>, <0 3 4>;
+ clocks = <&timer2_mux &timer3_mux>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ dual_timer2: dual_timer at fca01000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfca01000 0x1000>;
+ /* timer20 & timer21 */
+ interrupts = <0 4 4>, <0 5 4>;
+ clocks = <&timer4_mux &timer5_mux>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ dual_timer3: dual_timer at fca02000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfca02000 0x1000>;
+ /* timer30 & timer31 */
+ interrupts = <0 6 4>, <0 7 4>;
+ clocks = <&timer6_mux &timer7_mux>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ dual_timer4: dual_timer at fca03000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0xfca03000 0x1000>;
+ /* timer40 & timer41 */
+ interrupts = <0 96 4>, <0 97 4>;
+ clocks = <&timer8_mux &timer9_mux>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart0: uart at fcb00000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb00000 0x1000>;
+ interrupts = <0 20 4>;
+ clocks = <&uartclk0>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart1: uart at fcb01000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb01000 0x1000>;
+ interrupts = <0 21 4>;
+ clocks = <&uartclk1>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart2: uart at fcb02000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb02000 0x1000>;
+ interrupts = <0 22 4>;
+ clocks = <&uartclk2>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart3: uart at fcb03000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb03000 0x1000>;
+ interrupts = <0 23 4>;
+ clocks = <&uartclk3>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ uart4: uart at fcb04000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0xfcb04000 0x1000>;
+ interrupts = <0 24 4>;
+ clocks = <&uartclk4>;
+ clock-names = "apb_pclk";
+ status = "disabled";
+ };
+
+ gpio0: gpio at fc806000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc806000 0x1000>;
+ interrupts = <0 64 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 2 0 1 &pmx0 3 0 1 &pmx0 4 0 1
+ &pmx0 5 0 1 &pmx0 6 1 1 &pmx0 7 2 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk0>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio1: gpio at fc807000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc807000 0x1000>;
+ interrupts = <0 65 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
+ &pmx0 3 3 1 &pmx0 4 3 1 &pmx0 5 4 1
+ &pmx0 6 5 1 &pmx0 7 6 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk1>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio2: gpio at fc808000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc808000 0x1000>;
+ interrupts = <0 66 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 7 1 &pmx0 1 8 1 &pmx0 2 9 1
+ &pmx0 3 10 1 &pmx0 4 3 1 &pmx0 5 3 1
+ &pmx0 6 3 1 &pmx0 7 3 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk2>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio3: gpio at fc809000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc809000 0x1000>;
+ interrupts = <0 67 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 3 1 &pmx0 1 3 1 &pmx0 2 3 1
+ &pmx0 3 3 1 &pmx0 4 11 1 &pmx0 5 11 1
+ &pmx0 6 11 1 &pmx0 7 11 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk3>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio4: gpio at fc80a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80a000 0x1000>;
+ interrupts = <0 68 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 11 1 &pmx0 1 11 1 &pmx0 2 11 1
+ &pmx0 3 11 1 &pmx0 4 12 1 &pmx0 5 12 1
+ &pmx0 6 13 1 &pmx0 7 13 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk4>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio5: gpio at fc80b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80b000 0x1000>;
+ interrupts = <0 69 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 14 1 &pmx0 1 15 1 &pmx0 2 16 1
+ &pmx0 3 16 1 &pmx0 4 16 1 &pmx0 5 16 1
+ &pmx0 6 16 1 &pmx0 7 16 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk5>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio6: gpio at fc80c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80c000 0x1000>;
+ interrupts = <0 70 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 16 1 &pmx0 1 16 1 &pmx0 2 17 1
+ &pmx0 3 17 1 &pmx0 4 18 1 &pmx0 5 18 1
+ &pmx0 6 18 1 &pmx0 7 19 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk6>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio7: gpio at fc80d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80d000 0x1000>;
+ interrupts = <0 71 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 19 1 &pmx0 1 20 1 &pmx0 2 21 1
+ &pmx0 3 22 1 &pmx0 4 23 1 &pmx0 5 24 1
+ &pmx0 6 25 1 &pmx0 7 26 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk7>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio8: gpio at fc80e000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80e000 0x1000>;
+ interrupts = <0 72 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 27 1 &pmx0 1 28 1 &pmx0 2 29 1
+ &pmx0 3 30 1 &pmx0 4 31 1 &pmx0 5 32 1
+ &pmx0 6 33 1 &pmx0 7 34 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk8>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio9: gpio at fc80f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc80f000 0x1000>;
+ interrupts = <0 73 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 35 1 &pmx0 1 36 1 &pmx0 2 37 1
+ &pmx0 3 38 1 &pmx0 4 39 1 &pmx0 5 40 1
+ &pmx0 6 41 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk9>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio10: gpio at fc810000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc810000 0x1000>;
+ interrupts = <0 74 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 2 43 1 &pmx0 3 44 1 &pmx0 4 45 1
+ &pmx0 5 45 1 &pmx0 6 46 1 &pmx0 7 46 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk10>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio11: gpio at fc811000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc811000 0x1000>;
+ interrupts = <0 75 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 47 1 &pmx0 1 47 1 &pmx0 2 47 1
+ &pmx0 3 47 1 &pmx0 4 47 1 &pmx0 5 48 1
+ &pmx0 6 49 1 &pmx0 7 49 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk11>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio12: gpio at fc812000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc812000 0x1000>;
+ interrupts = <0 76 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 49 1 &pmx0 1 50 1 &pmx0 2 49 1
+ &pmx0 3 49 1 &pmx0 4 51 1 &pmx0 5 51 1
+ &pmx0 6 51 1 &pmx0 7 52 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk12>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio13: gpio at fc813000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc813000 0x1000>;
+ interrupts = <0 77 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 51 1 &pmx0 1 51 1 &pmx0 2 53 1
+ &pmx0 3 53 1 &pmx0 4 53 1 &pmx0 5 54 1
+ &pmx0 6 55 1 &pmx0 7 56 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk13>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio14: gpio at fc814000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc814000 0x1000>;
+ interrupts = <0 78 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 57 1 &pmx0 1 97 1 &pmx0 2 97 1
+ &pmx0 3 58 1 &pmx0 4 59 1 &pmx0 5 60 1
+ &pmx0 6 60 1 &pmx0 7 61 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk14>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio15: gpio at fc815000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc815000 0x1000>;
+ interrupts = <0 79 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 61 1 &pmx0 1 62 1 &pmx0 2 62 1
+ &pmx0 3 63 1 &pmx0 4 63 1 &pmx0 5 64 1
+ &pmx0 6 64 1 &pmx0 7 65 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk15>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio16: gpio at fc816000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc816000 0x1000>;
+ interrupts = <0 80 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 66 1 &pmx0 1 67 1 &pmx0 2 68 1
+ &pmx0 3 69 1 &pmx0 4 70 1 &pmx0 5 71 1
+ &pmx0 6 72 1 &pmx0 7 73 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk16>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio17: gpio at fc817000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc817000 0x1000>;
+ interrupts = <0 81 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 74 1 &pmx0 1 75 1 &pmx0 2 76 1
+ &pmx0 3 77 1 &pmx0 4 78 1 &pmx0 5 79 1
+ &pmx0 6 80 1 &pmx0 7 81 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk17>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio18: gpio at fc818000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc818000 0x1000>;
+ interrupts = <0 82 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 82 1 &pmx0 1 83 1 &pmx0 2 83 1
+ &pmx0 3 84 1 &pmx0 4 84 1 &pmx0 5 85 1
+ &pmx0 6 86 1 &pmx0 7 87 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk18>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio19: gpio at fc819000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc819000 0x1000>;
+ interrupts = <0 83 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 87 1 &pmx0 1 87 1 &pmx0 2 88 1
+ &pmx0 3 88 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk19>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio20: gpio at fc81a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc81a000 0x1000>;
+ interrupts = <0 84 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 0 89 1 &pmx0 1 89 1 &pmx0 2 90 1
+ &pmx0 3 90 1 &pmx0 4 91 1 &pmx0 5 92 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk20>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio21: gpio at fc81b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xfc81b000 0x1000>;
+ interrupts = <0 85 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = < &pmx0 3 94 1 &pmx0 7 96 1>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&gpioclk21>;
+ clock-names = "apb_pclk";
+ };
+
+ pmx0: pinmux at fc803000 {
+ compatible = "pinctrl-single";
+ reg = <0xfc803000 0x188>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #gpio-range-cells = <3>;
+ ranges;
+
+ pinctrl-single,register-width = <32>;
+ pinctrl-single,function-mask = <7>;
+ /* pin base, nr pins & gpio function */
+ pinctrl-single,gpio-range = <&range 0 3 0 &range 3 9 1
+ &range 12 1 0 &range 13 29 1
+ &range 43 1 0 &range 44 49 1
+ &range 94 1 1 &range 96 2 1>;
+
+ range: gpio-range {
+ #pinctrl-single,gpio-range-cells = <3>;
+ };
+ };
+
+ pmx1: pinmux at fc803800 {
+ compatible = "pinconf-single";
+ reg = <0xfc803800 0x2dc>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pinctrl-single,register-width = <32>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/hi4511.dts b/arch/arm/boot/dts/hi4511.dts
new file mode 100644
index 0000000..d45104e
--- /dev/null
+++ b/arch/arm/boot/dts/hi4511.dts
@@ -0,0 +1,648 @@
+/*
+ * Copyright (C) 2012-2013 Linaro Ltd.
+ * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+
+/dts-v1/;
+/include/ "hi3620.dtsi"
+
+/ {
+ model = "Hisilicon Hi4511 Development Board";
+ compatible = "hisilicon,hi3620-hi4511";
+
+ chosen {
+ bootargs = "console=ttyAMA0,115200 root=/dev/ram0 earlyprintk";
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x20000000>;
+ };
+
+ amba {
+ dual_timer0: dual_timer at fc800000 {
+ status = "ok";
+ };
+
+ uart0: uart at fcb00000 { /* console */
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart0_pmx_func &uart0_cfg_func>;
+ pinctrl-1 = <&uart0_pmx_idle &uart0_cfg_idle>;
+ status = "ok";
+ };
+
+ uart1: uart at fcb01000 { /* modem */
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart1_pmx_func &uart1_cfg_func>;
+ pinctrl-1 = <&uart1_pmx_idle &uart1_cfg_idle>;
+ status = "ok";
+ };
+
+ uart2: uart at fcb02000 { /* audience */
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart2_pmx_func &uart2_cfg_func>;
+ pinctrl-1 = <&uart2_pmx_idle &uart2_cfg_idle>;
+ status = "ok";
+ };
+
+ uart3: uart at fcb03000 {
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart3_pmx_func &uart3_cfg_func>;
+ pinctrl-1 = <&uart3_pmx_idle &uart3_cfg_idle>;
+ status = "ok";
+ };
+
+ uart4: uart at fcb04000 {
+ pinctrl-names = "default", "idle";
+ pinctrl-0 = <&uart4_pmx_func &uart4_cfg_func>;
+ pinctrl-1 = <&uart4_pmx_idle &uart4_cfg_func>;
+ status = "ok";
+ };
+
+ pmx0: pinmux at fc803000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&board_pmx_pins>;
+
+ board_pmx_pins: board_pmx_pins {
+ pinctrl-single,pins = <
+ 0x008 0x0 /* GPIO -- eFUSE_DOUT */
+ 0x100 0x0 /* USIM_CLK & USIM_DATA (IOMG63) */
+ >;
+ };
+ uart0_pmx_func: uart0_pmx_func {
+ pinctrl-single,pins = <
+ 0x0f0 0x0
+ 0x0f4 0x0 /* UART0_RX & UART0_TX */
+ >;
+ };
+ uart0_pmx_idle: uart0_pmx_idle {
+ pinctrl-single,pins = <
+ /*0x0f0 0x1*/ /* UART0_CTS & UART0_RTS */
+ 0x0f4 0x1 /* UART0_RX & UART0_TX */
+ >;
+ };
+ uart1_pmx_func: uart1_pmx_func {
+ pinctrl-single,pins = <
+ 0x0f8 0x0 /* UART1_CTS & UART1_RTS (IOMG61) */
+ 0x0fc 0x0 /* UART1_RX & UART1_TX (IOMG62) */
+ >;
+ };
+ uart1_pmx_idle: uart1_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0f8 0x1 /* GPIO (IOMG61) */
+ 0x0fc 0x1 /* GPIO (IOMG62) */
+ >;
+ };
+ uart2_pmx_func: uart2_pmx_func {
+ pinctrl-single,pins = <
+ 0x104 0x2 /* UART2_RXD (IOMG96) */
+ 0x108 0x2 /* UART2_TXD (IOMG64) */
+ >;
+ };
+ uart2_pmx_idle: uart2_pmx_idle {
+ pinctrl-single,pins = <
+ 0x104 0x1 /* GPIO (IOMG96) */
+ 0x108 0x1 /* GPIO (IOMG64) */
+ >;
+ };
+ uart3_pmx_func: uart3_pmx_func {
+ pinctrl-single,pins = <
+ 0x160 0x2 /* UART3_CTS & UART3_RTS (IOMG85) */
+ 0x164 0x2 /* UART3_RXD & UART3_TXD (IOMG86) */
+ >;
+ };
+ uart3_pmx_idle: uart3_pmx_idle {
+ pinctrl-single,pins = <
+ 0x160 0x1 /* GPIO (IOMG85) */
+ 0x164 0x1 /* GPIO (IOMG86) */
+ >;
+ };
+ uart4_pmx_func: uart4_pmx_func {
+ pinctrl-single,pins = <
+ 0x168 0x0 /* UART4_CTS & UART4_RTS (IOMG87) */
+ 0x16c 0x0 /* UART4_RXD (IOMG88) */
+ 0x170 0x0 /* UART4_TXD (IOMG93) */
+ >;
+ };
+ uart4_pmx_idle: uart4_pmx_idle {
+ pinctrl-single,pins = <
+ 0x168 0x1 /* GPIO (IOMG87) */
+ 0x16c 0x1 /* GPIO (IOMG88) */
+ 0x170 0x1 /* GPIO (IOMG93) */
+ >;
+ };
+ i2c0_pmx_func: i2c0_pmx_func {
+ pinctrl-single,pins = <
+ 0x0b4 0x0 /* I2C0_SCL & I2C0_SDA (IOMG45) */
+ >;
+ };
+ i2c0_pmx_idle: i2c0_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0b4 0x1 /* GPIO (IOMG45) */
+ >;
+ };
+ i2c1_pmx_func: i2c1_pmx_func {
+ pinctrl-single,pins = <
+ 0x0b8 0x0 /* I2C1_SCL & I2C1_SDA (IOMG46) */
+ >;
+ };
+ i2c1_pmx_idle: i2c1_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0b8 0x1 /* GPIO (IOMG46) */
+ >;
+ };
+ i2c2_pmx_func: i2c2_pmx_func {
+ pinctrl-single,pins = <
+ 0x068 0x0 /* I2C2_SCL (IOMG26) */
+ 0x06c 0x0 /* I2C2_SDA (IOMG27) */
+ >;
+ };
+ i2c2_pmx_idle: i2c2_pmx_idle {
+ pinctrl-single,pins = <
+ 0x068 0x1 /* GPIO (IOMG26) */
+ 0x06c 0x1 /* GPIO (IOMG27) */
+ >;
+ };
+ i2c3_pmx_func: i2c3_pmx_func {
+ pinctrl-single,pins = <
+ 0x050 0x2 /* I2C3_SCL (IOMG20) */
+ 0x054 0x2 /* I2C3_SDA (IOMG21) */
+ >;
+ };
+ i2c3_pmx_idle: i2c3_pmx_idle {
+ pinctrl-single,pins = <
+ 0x050 0x1 /* GPIO (IOMG20) */
+ 0x054 0x1 /* GPIO (IOMG21) */
+ >;
+ };
+ spi0_pmx_func: spi0_pmx_func {
+ pinctrl-single,pins = <
+ 0x0d4 0x0 /* SPI0_CLK/SPI0_DI/SPI0_DO (IOMG53) */
+ 0x0d8 0x0 /* SPI0_CS0 (IOMG54) */
+ 0x0dc 0x0 /* SPI0_CS1 (IOMG55) */
+ 0x0e0 0x0 /* SPI0_CS2 (IOMG56) */
+ 0x0e4 0x0 /* SPI0_CS3 (IOMG57) */
+ >;
+ };
+ spi0_pmx_idle: spi0_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0d4 0x1 /* GPIO (IOMG53) */
+ 0x0d8 0x1 /* GPIO (IOMG54) */
+ 0x0dc 0x1 /* GPIO (IOMG55) */
+ 0x0e0 0x1 /* GPIO (IOMG56) */
+ 0x0e4 0x1 /* GPIO (IOMG57) */
+ >;
+ };
+ spi1_pmx_func: spi1_pmx_func {
+ pinctrl-single,pins = <
+ 0x184 0x0 /* SPI1_CLK/SPI1_DI (IOMG98) */
+ 0x0e8 0x0 /* SPI1_DO (IOMG58) */
+ 0x0ec 0x0 /* SPI1_CS (IOMG95) */
+ >;
+ };
+ spi1_pmx_idle: spi1_pmx_idle {
+ pinctrl-single,pins = <
+ 0x184 0x1 /* GPIO (IOMG98) */
+ 0x0e8 0x1 /* GPIO (IOMG58) */
+ 0x0ec 0x1 /* GPIO (IOMG95) */
+ >;
+ };
+ kpc_pmx_func: kpc_pmx_func {
+ pinctrl-single,pins = <
+ 0x12c 0x0 /* KEY_IN0 (IOMG73) */
+ 0x130 0x0 /* KEY_IN1 (IOMG74) */
+ 0x134 0x0 /* KEY_IN2 (IOMG75) */
+ 0x10c 0x0 /* KEY_OUT0 (IOMG65) */
+ 0x110 0x0 /* KEY_OUT1 (IOMG66) */
+ 0x114 0x0 /* KEY_OUT2 (IOMG67) */
+ >;
+ };
+ kpc_pmx_idle: kpc_pmx_idle {
+ pinctrl-single,pins = <
+ 0x12c 0x1 /* GPIO (IOMG73) */
+ 0x130 0x1 /* GPIO (IOMG74) */
+ 0x134 0x1 /* GPIO (IOMG75) */
+ 0x10c 0x1 /* GPIO (IOMG65) */
+ 0x110 0x1 /* GPIO (IOMG66) */
+ 0x114 0x1 /* GPIO (IOMG67) */
+ >;
+ };
+ gpio_key_func: gpio_key_func {
+ pinctrl-single,pins = <
+ 0x10c 0x1 /* KEY_OUT0/GPIO (IOMG65) */
+ 0x130 0x1 /* KEY_IN1/GPIO (IOMG74) */
+ >;
+ };
+ emmc_pmx_func: emmc_pmx_func {
+ pinctrl-single,pins = <
+ 0x030 0x2 /* eMMC_CMD/eMMC_CLK (IOMG12) */
+ 0x018 0x0 /* NAND_CS3_N (IOMG6) */
+ 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */
+ 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */
+ 0x02c 0x2 /* eMMC_DATA[0:7] (IOMG10) */
+ >;
+ };
+ emmc_pmx_idle: emmc_pmx_idle {
+ pinctrl-single,pins = <
+ 0x030 0x0 /* GPIO (IOMG12) */
+ 0x018 0x1 /* GPIO (IOMG6) */
+ 0x024 0x1 /* GPIO (IOMG8) */
+ 0x028 0x1 /* GPIO (IOMG9) */
+ 0x02c 0x1 /* GPIO (IOMG10) */
+ >;
+ };
+ sd_pmx_func: sd_pmx_func {
+ pinctrl-single,pins = <
+ 0x0bc 0x0 /* SD_CLK/SD_CMD/SD_DATA0/SD_DATA1/SD_DATA2 (IOMG47) */
+ 0x0c0 0x0 /* SD_DATA3 (IOMG48) */
+ >;
+ };
+ sd_pmx_idle: sd_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0bc 0x1 /* GPIO (IOMG47) */
+ 0x0c0 0x1 /* GPIO (IOMG48) */
+ >;
+ };
+ nand_pmx_func: nand_pmx_func {
+ pinctrl-single,pins = <
+ 0x00c 0x0 /* NAND_ALE/NAND_CLE/.../NAND_DATA[0:7] (IOMG3) */
+ 0x010 0x0 /* NAND_CS1_N (IOMG4) */
+ 0x014 0x0 /* NAND_CS2_N (IOMG5) */
+ 0x018 0x0 /* NAND_CS3_N (IOMG6) */
+ 0x01c 0x0 /* NAND_BUSY0_N (IOMG94) */
+ 0x020 0x0 /* NAND_BUSY1_N (IOMG7) */
+ 0x024 0x0 /* NAND_BUSY2_N (IOMG8) */
+ 0x028 0x0 /* NAND_BUSY3_N (IOMG9) */
+ 0x02c 0x0 /* NAND_DATA[8:15] (IOMG10) */
+ >;
+ };
+ nand_pmx_idle: nand_pmx_idle {
+ pinctrl-single,pins = <
+ 0x00c 0x1 /* GPIO (IOMG3) */
+ 0x010 0x1 /* GPIO (IOMG4) */
+ 0x014 0x1 /* GPIO (IOMG5) */
+ 0x018 0x1 /* GPIO (IOMG6) */
+ 0x01c 0x1 /* GPIO (IOMG94) */
+ 0x020 0x1 /* GPIO (IOMG7) */
+ 0x024 0x1 /* GPIO (IOMG8) */
+ 0x028 0x1 /* GPIO (IOMG9) */
+ 0x02c 0x1 /* GPIO (IOMG10) */
+ >;
+ };
+ sdio_pmx_func: sdio_pmx_func {
+ pinctrl-single,pins = <
+ 0x0c4 0x0 /* SDIO_CLK/SDIO_CMD/SDIO_DATA[0:3] (IOMG49) */
+ >;
+ };
+ sdio_pmx_idle: sdio_pmx_idle {
+ pinctrl-single,pins = <
+ 0x0c4 0x1 /* GPIO (IOMG49) */
+ >;
+ };
+ audio_out_pmx_func: audio_out_pmx_func {
+ pinctrl-single,pins = <
+ 0x0f0 0x1 /* GPIO (IOMG59), audio spk & earphone */
+ >;
+ };
+ };
+
+ pmx1: pinmux at fc803800 {
+ pinctrl-names = "default";
+ pinctrl-0 = < &board_pu_pins &board_pd_pins &board_pd_ps_pins
+ &board_np_pins &board_ps_pins &kpc_cfg_func
+ &audio_out_cfg_func>;
+ board_pu_pins: board_pu_pins {
+ pinctrl-single,pins = <
+ 0x014 0 /* GPIO_158 (IOCFG2) */
+ 0x018 0 /* GPIO_159 (IOCFG3) */
+ 0x01c 0 /* BOOT_MODE0 (IOCFG4) */
+ 0x020 0 /* BOOT_MODE1 (IOCFG5) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ };
+ board_pd_pins: board_pd_pins {
+ pinctrl-single,pins = <
+ 0x038 0 /* eFUSE_DOUT (IOCFG11) */
+ 0x150 0 /* ISP_GPIO8 (IOCFG93) */
+ 0x154 0 /* ISP_GPIO9 (IOCFG94) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ board_pd_ps_pins: board_pd_ps_pins {
+ pinctrl-single,pins = <
+ 0x2d8 0 /* CLK_OUT0 (IOCFG190) */
+ 0x004 0 /* PMU_SPI_DATA (IOCFG192) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ board_np_pins: board_np_pins {
+ pinctrl-single,pins = <
+ 0x24c 0 /* KEYPAD_OUT7 (IOCFG155) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ board_ps_pins: board_ps_pins {
+ pinctrl-single,pins = <
+ 0x000 0 /* PMU_SPI_CLK (IOCFG191) */
+ 0x008 0 /* PMU_SPI_CS_N (IOCFG193) */
+ >;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ uart0_cfg_func: uart0_cfg_func {
+ pinctrl-single,pins = <
+ 0x208 0 /* UART0_RXD (IOCFG138) */
+ 0x20c 0 /* UART0_TXD (IOCFG139) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart0_cfg_idle: uart0_cfg_idle {
+ pinctrl-single,pins = <
+ 0x208 0 /* UART0_RXD (IOCFG138) */
+ 0x20c 0 /* UART0_TXD (IOCFG139) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart1_cfg_func: uart1_cfg_func {
+ pinctrl-single,pins = <
+ 0x210 0 /* UART1_CTS (IOCFG140) */
+ 0x214 0 /* UART1_RTS (IOCFG141) */
+ 0x218 0 /* UART1_RXD (IOCFG142) */
+ 0x21c 0 /* UART1_TXD (IOCFG143) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart1_cfg_idle: uart1_cfg_idle {
+ pinctrl-single,pins = <
+ 0x210 0 /* UART1_CTS (IOCFG140) */
+ 0x214 0 /* UART1_RTS (IOCFG141) */
+ 0x218 0 /* UART1_RXD (IOCFG142) */
+ 0x21c 0 /* UART1_TXD (IOCFG143) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart2_cfg_func: uart2_cfg_func {
+ pinctrl-single,pins = <
+ 0x220 0 /* UART2_CTS (IOCFG144) */
+ 0x224 0 /* UART2_RTS (IOCFG145) */
+ 0x228 0 /* UART2_RXD (IOCFG146) */
+ 0x22c 0 /* UART2_TXD (IOCFG147) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart2_cfg_idle: uart2_cfg_idle {
+ pinctrl-single,pins = <
+ 0x220 0 /* GPIO (IOCFG144) */
+ 0x224 0 /* GPIO (IOCFG145) */
+ 0x228 0 /* GPIO (IOCFG146) */
+ 0x22c 0 /* GPIO (IOCFG147) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart3_cfg_func: uart3_cfg_func {
+ pinctrl-single,pins = <
+ 0x294 0 /* UART3_CTS (IOCFG173) */
+ 0x298 0 /* UART3_RTS (IOCFG174) */
+ 0x29c 0 /* UART3_RXD (IOCFG175) */
+ 0x2a0 0 /* UART3_TXD (IOCFG176) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart3_cfg_idle: uart3_cfg_idle {
+ pinctrl-single,pins = <
+ 0x294 0 /* UART3_CTS (IOCFG173) */
+ 0x298 0 /* UART3_RTS (IOCFG174) */
+ 0x29c 0 /* UART3_RXD (IOCFG175) */
+ 0x2a0 0 /* UART3_TXD (IOCFG176) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ uart4_cfg_func: uart4_cfg_func {
+ pinctrl-single,pins = <
+ 0x2a4 0 /* UART4_CTS (IOCFG177) */
+ 0x2a8 0 /* UART4_RTS (IOCFG178) */
+ 0x2ac 0 /* UART4_RXD (IOCFG179) */
+ 0x2b0 0 /* UART4_TXD (IOCFG180) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ i2c0_cfg_func: i2c0_cfg_func {
+ pinctrl-single,pins = <
+ 0x17c 0 /* I2C0_SCL (IOCFG103) */
+ 0x180 0 /* I2C0_SDA (IOCFG104) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ i2c1_cfg_func: i2c1_cfg_func {
+ pinctrl-single,pins = <
+ 0x184 0 /* I2C1_SCL (IOCFG105) */
+ 0x188 0 /* I2C1_SDA (IOCFG106) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ i2c2_cfg_func: i2c2_cfg_func {
+ pinctrl-single,pins = <
+ 0x118 0 /* I2C2_SCL (IOCFG79) */
+ 0x11c 0 /* I2C2_SDA (IOCFG80) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ i2c3_cfg_func: i2c3_cfg_func {
+ pinctrl-single,pins = <
+ 0x100 0 /* I2C3_SCL (IOCFG73) */
+ 0x104 0 /* I2C3_SDA (IOCFG74) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ spi0_cfg_func1: spi0_cfg_func1 {
+ pinctrl-single,pins = <
+ 0x1d4 0 /* SPI0_CLK (IOCFG125) */
+ 0x1d8 0 /* SPI0_DI (IOCFG126) */
+ 0x1dc 0 /* SPI0_DO (IOCFG127) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ spi0_cfg_func2: spi0_cfg_func2 {
+ pinctrl-single,pins = <
+ 0x1e0 0 /* SPI0_CS0 (IOCFG128) */
+ 0x1e4 0 /* SPI0_CS1 (IOCFG129) */
+ 0x1e8 0 /* SPI0_CS2 (IOCFG130 */
+ 0x1ec 0 /* SPI0_CS3 (IOCFG131) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ spi1_cfg_func1: spi1_cfg_func1 {
+ pinctrl-single,pins = <
+ 0x1f0 0 /* SPI1_CLK (IOCFG132) */
+ 0x1f4 0 /* SPI1_DI (IOCFG133) */
+ 0x1f8 0 /* SPI1_DO (IOCFG134) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ spi1_cfg_func2: spi1_cfg_func2 {
+ pinctrl-single,pins = <
+ 0x1fc 0 /* SPI1_CS (IOCFG135) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ kpc_cfg_func: kpc_cfg_func {
+ pinctrl-single,pins = <
+ 0x250 0 /* KEY_IN0 (IOCFG156) */
+ 0x254 0 /* KEY_IN1 (IOCFG157) */
+ 0x258 0 /* KEY_IN2 (IOCFG158) */
+ 0x230 0 /* KEY_OUT0 (IOCFG148) */
+ 0x234 0 /* KEY_OUT1 (IOCFG149) */
+ 0x238 0 /* KEY_OUT2 (IOCFG150) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ emmc_cfg_func: emmc_cfg_func {
+ pinctrl-single,pins = <
+ 0x0ac 0 /* eMMC_CMD (IOCFG40) */
+ 0x0b0 0 /* eMMC_CLK (IOCFG41) */
+ 0x058 0 /* NAND_CS3_N (IOCFG19) */
+ 0x064 0 /* NAND_BUSY2_N (IOCFG22) */
+ 0x068 0 /* NAND_BUSY3_N (IOCFG23) */
+ 0x08c 0 /* NAND_DATA8 (IOCFG32) */
+ 0x090 0 /* NAND_DATA9 (IOCFG33) */
+ 0x094 0 /* NAND_DATA10 (IOCFG34) */
+ 0x098 0 /* NAND_DATA11 (IOCFG35) */
+ 0x09c 0 /* NAND_DATA12 (IOCFG36) */
+ 0x0a0 0 /* NAND_DATA13 (IOCFG37) */
+ 0x0a4 0 /* NAND_DATA14 (IOCFG38) */
+ 0x0a8 0 /* NAND_DATA15 (IOCFG39) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ sd_cfg_func1: sd_cfg_func1 {
+ pinctrl-single,pins = <
+ 0x18c 0 /* SD_CLK (IOCFG107) */
+ 0x190 0 /* SD_CMD (IOCFG108) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ sd_cfg_func2: sd_cfg_func2 {
+ pinctrl-single,pins = <
+ 0x194 0 /* SD_DATA0 (IOCFG109) */
+ 0x198 0 /* SD_DATA1 (IOCFG110) */
+ 0x19c 0 /* SD_DATA2 (IOCFG111) */
+ 0x1a0 0 /* SD_DATA3 (IOCFG112) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x70 0xf0>;
+ };
+ nand_cfg_func1: nand_cfg_func1 {
+ pinctrl-single,pins = <
+ 0x03c 0 /* NAND_ALE (IOCFG12) */
+ 0x040 0 /* NAND_CLE (IOCFG13) */
+ 0x06c 0 /* NAND_DATA0 (IOCFG24) */
+ 0x070 0 /* NAND_DATA1 (IOCFG25) */
+ 0x074 0 /* NAND_DATA2 (IOCFG26) */
+ 0x078 0 /* NAND_DATA3 (IOCFG27) */
+ 0x07c 0 /* NAND_DATA4 (IOCFG28) */
+ 0x080 0 /* NAND_DATA5 (IOCFG29) */
+ 0x084 0 /* NAND_DATA6 (IOCFG30) */
+ 0x088 0 /* NAND_DATA7 (IOCFG31) */
+ 0x08c 0 /* NAND_DATA8 (IOCFG32) */
+ 0x090 0 /* NAND_DATA9 (IOCFG33) */
+ 0x094 0 /* NAND_DATA10 (IOCFG34) */
+ 0x098 0 /* NAND_DATA11 (IOCFG35) */
+ 0x09c 0 /* NAND_DATA12 (IOCFG36) */
+ 0x0a0 0 /* NAND_DATA13 (IOCFG37) */
+ 0x0a4 0 /* NAND_DATA14 (IOCFG38) */
+ 0x0a8 0 /* NAND_DATA15 (IOCFG39) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ nand_cfg_func2: nand_cfg_func2 {
+ pinctrl-single,pins = <
+ 0x044 0 /* NAND_RE_N (IOCFG14) */
+ 0x048 0 /* NAND_WE_N (IOCFG15) */
+ 0x04c 0 /* NAND_CS0_N (IOCFG16) */
+ 0x050 0 /* NAND_CS1_N (IOCFG17) */
+ 0x054 0 /* NAND_CS2_N (IOCFG18) */
+ 0x058 0 /* NAND_CS3_N (IOCFG19) */
+ 0x05c 0 /* NAND_BUSY0_N (IOCFG20) */
+ 0x060 0 /* NAND_BUSY1_N (IOCFG21) */
+ 0x064 0 /* NAND_BUSY2_N (IOCFG22) */
+ 0x068 0 /* NAND_BUSY3_N (IOCFG23) */
+ >;
+ pinctrl-single,bias-pulldown = <0 2 0 2>;
+ pinctrl-single,bias-pullup = <1 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ sdio_cfg_func: sdio_cfg_func {
+ pinctrl-single,pins = <
+ 0x1a4 0 /* SDIO0_CLK (IOCG113) */
+ 0x1a8 0 /* SDIO0_CMD (IOCG114) */
+ 0x1ac 0 /* SDIO0_DATA0 (IOCG115) */
+ 0x1b0 0 /* SDIO0_DATA1 (IOCG116) */
+ 0x1b4 0 /* SDIO0_DATA2 (IOCG117) */
+ 0x1b8 0 /* SDIO0_DATA3 (IOCG118) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ pinctrl-single,drive-strength = <0x30 0xf0>;
+ };
+ audio_out_cfg_func: audio_out_cfg_func {
+ pinctrl-single,pins = <
+ 0x200 0 /* GPIO (IOCFG136) */
+ 0x204 0 /* GPIO (IOCFG137) */
+ >;
+ pinctrl-single,bias-pulldown = <2 2 0 2>;
+ pinctrl-single,bias-pullup = <0 1 0 1>;
+ };
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ call {
+ label = "call";
+ gpios = <&gpio17 2 0>;
+ linux,code = <169>; /* KEY_PHONE */
+ };
+ };
+};
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v9 4/7] ARM: config: enable hi3xxx in multi_v7_defconfig
2013-08-28 13:10 [PATCH v9 0/7] enable hi3xxx SoC Haojian Zhuang
` (2 preceding siblings ...)
2013-08-28 13:10 ` [PATCH v9 3/7] ARM: dts: enable hi4511 " Haojian Zhuang
@ 2013-08-28 13:10 ` Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 5/7] ARM: config: add defconfig for Hi3xxx Haojian Zhuang
` (2 subsequent siblings)
6 siblings, 0 replies; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-28 13:10 UTC (permalink / raw)
To: linux-arm-kernel
Enable ARCH_HI3xxx in multi_v7_defconfig.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
arch/arm/configs/multi_v7_defconfig | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index fe0bdc3..c7b5247 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -8,6 +8,7 @@ CONFIG_MACH_ARMADA_XP=y
CONFIG_ARCH_BCM=y
CONFIG_GPIO_PCA953X=y
CONFIG_ARCH_HIGHBANK=y
+CONFIG_ARCH_HI3xxx=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARCH_MXC=y
CONFIG_MACH_IMX51_DT=y
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v9 5/7] ARM: config: add defconfig for Hi3xxx
2013-08-28 13:10 [PATCH v9 0/7] enable hi3xxx SoC Haojian Zhuang
` (3 preceding siblings ...)
2013-08-28 13:10 ` [PATCH v9 4/7] ARM: config: enable hi3xxx in multi_v7_defconfig Haojian Zhuang
@ 2013-08-28 13:10 ` Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 6/7] ARM: hi3xxx: add smp support Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 7/7] ARM: hi3xxx: add hotplug support Haojian Zhuang
6 siblings, 0 replies; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-28 13:10 UTC (permalink / raw)
To: linux-arm-kernel
Add default config for arch-hi3xxx. It's used for Hisilicon Hi3xxx SoC.
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
arch/arm/configs/hi3xxx_defconfig | 56 +++++++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
create mode 100644 arch/arm/configs/hi3xxx_defconfig
diff --git a/arch/arm/configs/hi3xxx_defconfig b/arch/arm/configs/hi3xxx_defconfig
new file mode 100644
index 0000000..f186bdf
--- /dev/null
+++ b/arch/arm/configs/hi3xxx_defconfig
@@ -0,0 +1,56 @@
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_RD_LZMA=y
+CONFIG_ARCH_HI3xxx=y
+CONFIG_SMP=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_NET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_DRM=y
+CONFIG_FB_SIMPLE=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_STORAGE=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_MMC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_PL031=y
+CONFIG_DMADEVICES=y
+CONFIG_DW_DMAC=y
+CONFIG_PL330_DMA=y
+CONFIG_PWM=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_LOCKUP_DETECTOR=y
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v9 6/7] ARM: hi3xxx: add smp support
2013-08-28 13:10 [PATCH v9 0/7] enable hi3xxx SoC Haojian Zhuang
` (4 preceding siblings ...)
2013-08-28 13:10 ` [PATCH v9 5/7] ARM: config: add defconfig for Hi3xxx Haojian Zhuang
@ 2013-08-28 13:10 ` Haojian Zhuang
2013-08-29 18:24 ` Kevin Hilman
2013-08-28 13:10 ` [PATCH v9 7/7] ARM: hi3xxx: add hotplug support Haojian Zhuang
6 siblings, 1 reply; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-28 13:10 UTC (permalink / raw)
To: linux-arm-kernel
From: Zhangfei Gao <zhangfei.gao@linaro.org>
Enable SMP support on hi3xxx platform
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Zhang Mingjun <zhang.mingjun@linaro.org>
Tested-by: Li Xin <li.xin@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
.../bindings/arm/hisilicon/hisilicon.txt | 50 +++++++++++++++++
arch/arm/boot/dts/hi3620-clk.dtsi | 4 ++
arch/arm/boot/dts/hi3620.dtsi | 27 +++++++++
arch/arm/mach-hi3xxx/Kconfig | 2 +
arch/arm/mach-hi3xxx/Makefile | 3 +-
arch/arm/mach-hi3xxx/core.h | 13 +++++
arch/arm/mach-hi3xxx/hi3xxx.c | 5 ++
arch/arm/mach-hi3xxx/platsmp.c | 43 ++++++++++++++
arch/arm/mach-hi3xxx/system.c | 65 ++++++++++++++++++++++
9 files changed, 211 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/mach-hi3xxx/core.h
create mode 100644 arch/arm/mach-hi3xxx/platsmp.c
create mode 100644 arch/arm/mach-hi3xxx/system.c
diff --git a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
index 3be60c8..1462903 100644
--- a/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+++ b/Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
@@ -8,3 +8,53 @@ Required root node properties:
Hi4511 Board
Required root node properties:
- compatible = "hisilicon,hi3620-hi4511";
+
+
+Hisilicon system controller
+
+Required properties:
+- compatible : "hisilicon,sysctrl"
+- reg : Register address and size
+
+Optional properties:
+- smp-off : offset in sysctrl for notifying slave cpu booting
+ cpu 1, reg;
+ cpu 2, reg + 0x4;
+ cpu 3, reg + 0x8;
+ If reg value is not zero, cpun exit wfi and go
+- resume-off : offset in sysctrl for notifying cpu0 when resume
+- reboot-off : offset in sysctrl for system reboot
+
+Example:
+
+ /* for Hi3716 */
+ sysctrl: system-controller at f8000000 {
+ compatible = "hisilicon,sysctrl";
+ reg = <0xf8000000 0x1000>;
+ smp-off = <0xc0>;
+ reboot-off = <0x4>;
+ };
+
+ /* for Hi3620 */
+ sysctrl: system-controller at fc802000 {
+ compatible = "hisilicon,sysctrl";
+ reg = <0xfc802000 0x1000>;
+ smp-off = <0x31c>;
+ resume-off = <0x308>;
+ reboot-off = <0x4>;
+ };
+
+Hi3716 cpuctrl register
+Hi3716 specific cpuctrl register, control power & clock of cpu and module.
+
+Required properties:
+- compatible : "hisilicon,hi3716-cpuctrl"
+- reg : register address and size
+
+Example:
+
+ /* for Hi3716 */
+ cpuctrl at f8a22000 {
+ compatible = "hisilicon,hi3716-cpuctrl";
+ reg = <0xf8a22000 0x2000>;
+ };
diff --git a/arch/arm/boot/dts/hi3620-clk.dtsi b/arch/arm/boot/dts/hi3620-clk.dtsi
index 78307c6..78a2a8bf 100644
--- a/arch/arm/boot/dts/hi3620-clk.dtsi
+++ b/arch/arm/boot/dts/hi3620-clk.dtsi
@@ -102,6 +102,10 @@
#address-cells = <1>;
#size-cells = <0>;
+ smp-off = <0x31c>;
+ resume-off = <0x308>;
+ reboot-off = <0x4>;
+
timer0_mux: timer0_mux {
compatible = "hisilicon,clk-mux";
#clock-cells = <0>;
diff --git a/arch/arm/boot/dts/hi3620.dtsi b/arch/arm/boot/dts/hi3620.dtsi
index e05c65c..03c816c 100644
--- a/arch/arm/boot/dts/hi3620.dtsi
+++ b/arch/arm/boot/dts/hi3620.dtsi
@@ -34,6 +34,27 @@
reg = <0x0>;
next-level-cache = <&L2>;
};
+
+ cpu at 1 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu at 2 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <2>;
+ next-level-cache = <&L2>;
+ };
+
+ cpu at 3 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <3>;
+ next-level-cache = <&L2>;
+ };
};
amba {
@@ -110,6 +131,12 @@
status = "disabled";
};
+ timer5: timer at fc000600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xfc000600 0x20>;
+ interrupts = <1 13 0xf01>;
+ };
+
uart0: uart at fcb00000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0xfcb00000 0x1000>;
diff --git a/arch/arm/mach-hi3xxx/Kconfig b/arch/arm/mach-hi3xxx/Kconfig
index 68bd26c..d2e7d57 100644
--- a/arch/arm/mach-hi3xxx/Kconfig
+++ b/arch/arm/mach-hi3xxx/Kconfig
@@ -6,6 +6,8 @@ config ARCH_HI3xxx
select CACHE_L2X0
select CLKSRC_OF
select GENERIC_CLOCKEVENTS
+ select HAVE_ARM_SCU
+ select HAVE_SMP
select PINCTRL
select PINCTRL_SINGLE
help
diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile
index d68ebb3..0917f1c 100644
--- a/arch/arm/mach-hi3xxx/Makefile
+++ b/arch/arm/mach-hi3xxx/Makefile
@@ -2,4 +2,5 @@
# Makefile for Hisilicon Hi36xx/Hi37xx processors line
#
-obj-y += hi3xxx.o
+obj-y += hi3xxx.o system.o
+obj-$(CONFIG_SMP) += platsmp.o
diff --git a/arch/arm/mach-hi3xxx/core.h b/arch/arm/mach-hi3xxx/core.h
new file mode 100644
index 0000000..3a9c50a
--- /dev/null
+++ b/arch/arm/mach-hi3xxx/core.h
@@ -0,0 +1,13 @@
+#ifndef __HISILICON_CORE_H
+#define __HISILICON_CORE_H
+
+#include <linux/reboot.h>
+
+extern void hs_set_cpu_jump(int cpu, void *jump_addr);
+extern int hs_get_cpu_jump(int cpu);
+extern void secondary_startup(void);
+extern void hs_map_io(void);
+extern void hs_restart(enum reboot_mode, const char *cmd);
+extern struct smp_operations hs_smp_ops;
+
+#endif
diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c
index e7c54bc..567a0d5 100644
--- a/arch/arm/mach-hi3xxx/hi3xxx.c
+++ b/arch/arm/mach-hi3xxx/hi3xxx.c
@@ -19,8 +19,11 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include "core.h"
+
static void __init hi3xxx_timer_init(void)
{
+ hs_map_io();
of_clk_init(NULL);
clocksource_of_init();
}
@@ -33,4 +36,6 @@ static const char *hs_compat[] __initdata = {
DT_MACHINE_START(HI3xxx, "Hisilicon Hi36xx/Hi37xx (Flattened Device Tree)")
.init_time = hi3xxx_timer_init,
.dt_compat = hs_compat,
+ .smp = smp_ops(hs_smp_ops),
+ .restart = hs_restart,
MACHINE_END
diff --git a/arch/arm/mach-hi3xxx/platsmp.c b/arch/arm/mach-hi3xxx/platsmp.c
new file mode 100644
index 0000000..a76a3cc
--- /dev/null
+++ b/arch/arm/mach-hi3xxx/platsmp.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2013 Hisilicon Limited.
+ * Based on platsmp.c, Copyright (C) 2002 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+#include <linux/smp.h>
+#include <linux/io.h>
+#include <asm/smp_scu.h>
+
+#include "core.h"
+
+static void __init hs_smp_prepare_cpus(unsigned int max_cpus)
+{
+ unsigned long base;
+ void __iomem *scu_base;
+
+ if (scu_a9_has_base()) {
+ base = scu_a9_get_base();
+ scu_base = ioremap(base, SZ_4K);
+ if (!scu_base) {
+ pr_err("ioremap(scu_base) failed\n");
+ return;
+ }
+ scu_enable(scu_base);
+ iounmap(scu_base);
+ }
+}
+
+static int hs_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ hs_set_cpu_jump(cpu, secondary_startup);
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+ return 0;
+}
+
+struct smp_operations hs_smp_ops __initdata = {
+ .smp_prepare_cpus = hs_smp_prepare_cpus,
+ .smp_boot_secondary = hs_boot_secondary,
+};
diff --git a/arch/arm/mach-hi3xxx/system.c b/arch/arm/mach-hi3xxx/system.c
new file mode 100644
index 0000000..1276398
--- /dev/null
+++ b/arch/arm/mach-hi3xxx/system.c
@@ -0,0 +1,65 @@
+/*
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2013 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+
+#include <asm/proc-fns.h>
+#include <asm/smp_plat.h>
+
+#include "core.h"
+
+static void __iomem *hs_sysctrl_base;
+static int hs_smp_reg;
+static int hs_resume_reg;
+static int hs_reboot_reg;
+
+void hs_map_io(void)
+{
+ struct device_node *np;
+
+ np = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl");
+ if (np) {
+ hs_sysctrl_base = of_iomap(np, 0);
+ if (!hs_sysctrl_base)
+ pr_err("of_iomap(sysctrl_base) failed\n");
+ of_property_read_u32(np, "smp-off", &hs_smp_reg);
+ of_property_read_u32(np, "resume-off", &hs_resume_reg);
+ of_property_read_u32(np, "reboot-off", &hs_reboot_reg);
+ }
+}
+
+void hs_set_cpu_jump(int cpu, void *jump_addr)
+{
+ int offset = hs_smp_reg;
+
+ cpu = cpu_logical_map(cpu);
+ if (cpu > 0)
+ offset += 0x04 * (cpu - 1);
+ writel_relaxed(virt_to_phys(jump_addr), hs_sysctrl_base + offset);
+}
+
+int hs_get_cpu_jump(int cpu)
+{
+ int offset = hs_smp_reg;
+
+ cpu = cpu_logical_map(cpu);
+ if (cpu > 0)
+ offset += 0x04 * (cpu - 1);
+ return readl_relaxed(hs_sysctrl_base + offset);
+}
+
+void hs_restart(enum reboot_mode mode, const char *cmd)
+{
+ writel_relaxed(0xdeadbeef, hs_sysctrl_base + hs_reboot_reg);
+
+ while (1)
+ cpu_do_idle();
+}
+
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v9 7/7] ARM: hi3xxx: add hotplug support
2013-08-28 13:10 [PATCH v9 0/7] enable hi3xxx SoC Haojian Zhuang
` (5 preceding siblings ...)
2013-08-28 13:10 ` [PATCH v9 6/7] ARM: hi3xxx: add smp support Haojian Zhuang
@ 2013-08-28 13:10 ` Haojian Zhuang
6 siblings, 0 replies; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-28 13:10 UTC (permalink / raw)
To: linux-arm-kernel
From: Zhangfei Gao <zhangfei.gao@linaro.org>
Enable hotplug support on hi3xxx platform
How to test:
cat proc/interrupts
echo 0 > /sys/devices/system/cpu/cpuX/online
cat proc/interrupts
echo 1 > /sys/devices/system/cpu/cpuX/online
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Tested-by: Zhang Mingjun <zhang.mingjun@linaro.org>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
arch/arm/mach-hi3xxx/Makefile | 1 +
arch/arm/mach-hi3xxx/core.h | 5 ++
arch/arm/mach-hi3xxx/hi3xxx.c | 1 +
arch/arm/mach-hi3xxx/hotplug.c | 168 +++++++++++++++++++++++++++++++++++++++++
arch/arm/mach-hi3xxx/platsmp.c | 5 ++
5 files changed, 180 insertions(+)
create mode 100644 arch/arm/mach-hi3xxx/hotplug.c
diff --git a/arch/arm/mach-hi3xxx/Makefile b/arch/arm/mach-hi3xxx/Makefile
index 0917f1c..c597cbf 100644
--- a/arch/arm/mach-hi3xxx/Makefile
+++ b/arch/arm/mach-hi3xxx/Makefile
@@ -4,3 +4,4 @@
obj-y += hi3xxx.o system.o
obj-$(CONFIG_SMP) += platsmp.o
+obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
diff --git a/arch/arm/mach-hi3xxx/core.h b/arch/arm/mach-hi3xxx/core.h
index 3a9c50a..095d1d4 100644
--- a/arch/arm/mach-hi3xxx/core.h
+++ b/arch/arm/mach-hi3xxx/core.h
@@ -10,4 +10,9 @@ extern void hs_map_io(void);
extern void hs_restart(enum reboot_mode, const char *cmd);
extern struct smp_operations hs_smp_ops;
+extern void __init hs_hotplug_init(void);
+extern void hs_cpu_die(unsigned int cpu);
+extern int hs_cpu_kill(unsigned int cpu);
+extern void hs_set_cpu(int cpu, bool enable);
+
#endif
diff --git a/arch/arm/mach-hi3xxx/hi3xxx.c b/arch/arm/mach-hi3xxx/hi3xxx.c
index 567a0d5..01ac68b 100644
--- a/arch/arm/mach-hi3xxx/hi3xxx.c
+++ b/arch/arm/mach-hi3xxx/hi3xxx.c
@@ -24,6 +24,7 @@
static void __init hi3xxx_timer_init(void)
{
hs_map_io();
+ hs_hotplug_init();
of_clk_init(NULL);
clocksource_of_init();
}
diff --git a/arch/arm/mach-hi3xxx/hotplug.c b/arch/arm/mach-hi3xxx/hotplug.c
new file mode 100644
index 0000000..3262788
--- /dev/null
+++ b/arch/arm/mach-hi3xxx/hotplug.c
@@ -0,0 +1,168 @@
+/*
+ * Copyright (c) 2013 Linaro Ltd.
+ * Copyright (c) 2013 Hisilicon Limited.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+#include <linux/cpu.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <asm/cacheflush.h>
+#include <asm/smp_plat.h>
+#include "core.h"
+
+enum {
+ HI3620_CTRL,
+ HI3716_CTRL,
+};
+
+static void __iomem *ctrl_base;
+static int id;
+
+static void hs_set_cpu_hi3620(int cpu, bool enable)
+{
+ u32 val = 0;
+
+ if (enable) {
+ /* MTCMOS set */
+ writel_relaxed(0x8 << cpu, ctrl_base + 0xd0);
+ /* unreset */
+ writel_relaxed(0x1011 << cpu, ctrl_base + 0x414);
+ /* reset */
+ writel_relaxed(0x401011 << cpu, ctrl_base + 0x410);
+
+ /* ISO disable */
+ writel(0x8 << cpu, ctrl_base + 0xc4);
+
+ /* WFI Mask */
+ val = readl(ctrl_base + 0x200);
+ val &= ~(0x10000000 << cpu);
+ writel(val, ctrl_base + 0x200);
+
+ /* Enable core */
+ writel_relaxed(0x01 << cpu, ctrl_base + 0xf4);
+ /* Unreset */
+ writel_relaxed(0x401011 << cpu, ctrl_base + 0x414);
+ } else {
+ /* iso enable */
+ writel_relaxed(0x8 << cpu, ctrl_base + 0xc0);
+
+ /* MTCMOS unset */
+ writel_relaxed(0x8 << cpu, ctrl_base + 0xd4);
+
+ /* wfi mask */
+ val = readl_relaxed(ctrl_base + 0x200);
+ val |= (0x10000000 << cpu);
+ writel_relaxed(val, ctrl_base + 0x200);
+
+ /* disable core*/
+ writel_relaxed(0x01 << cpu, ctrl_base + 0xf8);
+ /* reset */
+ writel_relaxed(0x401011 << cpu, ctrl_base + 0x410);
+ }
+}
+
+static void hs_set_cpu_hi3716(int cpu, bool enable)
+{
+ u32 val = 0;
+
+ if (enable) {
+ /* power on cpu1 */
+ val = readl_relaxed(ctrl_base + 0x1000);
+ val &= ~(0x1 << 8);
+ val |= (0x1 << 7);
+ val &= ~(0x1 << 3);
+ writel_relaxed(val, ctrl_base + 0x1000);
+
+ /* unreset */
+ val = readl_relaxed(ctrl_base + 0x50);
+ val &= ~(0x1 << 17);
+ writel_relaxed(val, ctrl_base + 0x50);
+ } else {
+ /* power down cpu1 */
+ val = readl_relaxed(ctrl_base + 0x1000);
+ val &= ~(0x1 << 8);
+ val |= (0x1 << 7);
+ val |= (0x1 << 3);
+ writel_relaxed(val, ctrl_base + 0x1000);
+
+ /* reset */
+ val = readl_relaxed(ctrl_base + 0x50);
+ val |= (0x1 << 17);
+ writel_relaxed(val, ctrl_base + 0x50);
+ }
+}
+
+void hs_set_cpu(int cpu, bool enable)
+{
+ if (!ctrl_base)
+ return;
+
+ if (id == HI3620_CTRL)
+ hs_set_cpu_hi3620(cpu, enable);
+ else if (id == HI3716_CTRL)
+ hs_set_cpu_hi3716(cpu, enable);
+}
+
+void __init hs_hotplug_init(void)
+{
+ struct device_node *node;
+
+ node = of_find_compatible_node(NULL, NULL, "hisilicon,hi3716-cpuctrl");
+ if (node) {
+ ctrl_base = of_iomap(node, 0);
+ id = HI3716_CTRL;
+ return;
+ }
+ node = of_find_compatible_node(NULL, NULL, "hisilicon,sysctrl");
+ if (node) {
+ ctrl_base = of_iomap(node, 0);
+ id = HI3620_CTRL;
+ return;
+ }
+}
+
+static inline void cpu_enter_lowpower(void)
+{
+ unsigned int v;
+
+ flush_cache_all();
+
+ /*
+ * Turn off coherency and L1 D-cache
+ */
+ asm volatile(
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " bic %0, %0, #0x40\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ " mrc p15, 0, %0, c1, c0, 0\n"
+ " bic %0, %0, #0x04\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ : "=&r" (v)
+ : "r" (0)
+ : "cc");
+}
+
+void hs_cpu_die(unsigned int cpu)
+{
+ cpu_enter_lowpower();
+ hs_set_cpu_jump(cpu, phys_to_virt(0));
+ cpu_do_idle();
+
+ /* We should have never returned from idle */
+ panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+}
+
+int hs_cpu_kill(unsigned int cpu)
+{
+ unsigned long timeout = jiffies + msecs_to_jiffies(50);
+
+ while (hs_get_cpu_jump(cpu))
+ if (time_after(jiffies, timeout))
+ return 0;
+ hs_set_cpu(cpu, false);
+ return 1;
+}
diff --git a/arch/arm/mach-hi3xxx/platsmp.c b/arch/arm/mach-hi3xxx/platsmp.c
index a76a3cc..6a08630 100644
--- a/arch/arm/mach-hi3xxx/platsmp.c
+++ b/arch/arm/mach-hi3xxx/platsmp.c
@@ -32,6 +32,7 @@ static void __init hs_smp_prepare_cpus(unsigned int max_cpus)
static int hs_boot_secondary(unsigned int cpu, struct task_struct *idle)
{
+ hs_set_cpu(cpu, true);
hs_set_cpu_jump(cpu, secondary_startup);
arch_send_wakeup_ipi_mask(cpumask_of(cpu));
return 0;
@@ -40,4 +41,8 @@ static int hs_boot_secondary(unsigned int cpu, struct task_struct *idle)
struct smp_operations hs_smp_ops __initdata = {
.smp_prepare_cpus = hs_smp_prepare_cpus,
.smp_boot_secondary = hs_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = hs_cpu_die,
+ .cpu_kill = hs_cpu_kill,
+#endif
};
--
1.8.1.2
^ permalink raw reply related [flat|nested] 13+ messages in thread
* [PATCH v9 3/7] ARM: dts: enable hi4511 with device tree
2013-08-28 13:10 ` [PATCH v9 3/7] ARM: dts: enable hi4511 " Haojian Zhuang
@ 2013-08-29 18:13 ` Kevin Hilman
2013-08-30 1:19 ` Haojian Zhuang
0 siblings, 1 reply; 13+ messages in thread
From: Kevin Hilman @ 2013-08-29 18:13 UTC (permalink / raw)
To: linux-arm-kernel
Haojian Zhuang <haojian.zhuang@linaro.org> writes:
> Enable Hisilicon Hi4511 development platform with device tree support.
>
> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
This still doesn't look quite right...
> ---
> arch/arm/boot/dts/Makefile | 1 +
> arch/arm/boot/dts/hi3620-clk.dtsi | 1058 +++++++++++++++++++++++++++++++++++++
> arch/arm/boot/dts/hi3620.dtsi | 513 ++++++++++++++++++
> arch/arm/boot/dts/hi4511.dts | 648 +++++++++++++++++++++++
> 4 files changed, 2220 insertions(+)
> create mode 100644 arch/arm/boot/dts/hi3620-clk.dtsi
> create mode 100644 arch/arm/boot/dts/hi3620.dtsi
> create mode 100644 arch/arm/boot/dts/hi4511.dts
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 641b3c9..6e7c1ca 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -61,6 +61,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
> exynos5250-snow.dtb \
> exynos5420-smdk5420.dtb \
> exynos5440-ssdk5440.dtb
> +dtb-$(CONFIG_ARCH_HI3xxx) += hi4511.dtb
> dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
> ecx-2000.dtb
> dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
> diff --git a/arch/arm/boot/dts/hi3620-clk.dtsi b/arch/arm/boot/dts/hi3620-clk.dtsi
> new file mode 100644
> index 0000000..78307c6
> --- /dev/null
> +++ b/arch/arm/boot/dts/hi3620-clk.dtsi
> @@ -0,0 +1,1058 @@
> +/*
> + * Hisilicon Ltd. Hi3620 SoC
> + *
> + * Copyright (C) 2012-2013 Hisilicon Ltd.
> + * Copyright (C) 2012-2013 Linaro Ltd.
> + *
> + * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * publishhed by the Free Software Foundation.
> + */
> +
> +/ {
> + clocks {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> +
> + osc32k: osc32k {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "osc32khz";
> + };
So you've now moved these all under the clocks node, but this still
isn't addressing Stephen's comments about using the
node-name at unit-address and the reg property in each node.
[...]
> + sysctrl: system-controller at fc802000 {
> + compatible = "hisilicon,sysctrl";
> + reg = <0xfc802000 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <0>;
Why is sysctrl and all of its children now under the clocks node?
Kevin
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v9 6/7] ARM: hi3xxx: add smp support
2013-08-28 13:10 ` [PATCH v9 6/7] ARM: hi3xxx: add smp support Haojian Zhuang
@ 2013-08-29 18:24 ` Kevin Hilman
0 siblings, 0 replies; 13+ messages in thread
From: Kevin Hilman @ 2013-08-29 18:24 UTC (permalink / raw)
To: linux-arm-kernel
Haojian Zhuang <haojian.zhuang@linaro.org> writes:
> From: Zhangfei Gao <zhangfei.gao@linaro.org>
>
> Enable SMP support on hi3xxx platform
>
> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
> Tested-by: Zhang Mingjun <zhang.mingjun@linaro.org>
> Tested-by: Li Xin <li.xin@linaro.org>
> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
> ---
> .../bindings/arm/hisilicon/hisilicon.txt | 50 +++++++++++++++++
New/extended bindings need review/ack from the DT maintainers. Please
be sure to Cc: devicetree at vger.kernel.org on patches with new/updated
bindings.
Kevin
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v9 3/7] ARM: dts: enable hi4511 with device tree
2013-08-29 18:13 ` Kevin Hilman
@ 2013-08-30 1:19 ` Haojian Zhuang
2013-08-30 14:44 ` Kevin Hilman
0 siblings, 1 reply; 13+ messages in thread
From: Haojian Zhuang @ 2013-08-30 1:19 UTC (permalink / raw)
To: linux-arm-kernel
On 30 August 2013 02:13, Kevin Hilman <khilman@linaro.org> wrote:
> Haojian Zhuang <haojian.zhuang@linaro.org> writes:
>
>> Enable Hisilicon Hi4511 development platform with device tree support.
>>
>> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
>
> This still doesn't look quite right...
>
>> ---
>> arch/arm/boot/dts/Makefile | 1 +
>> arch/arm/boot/dts/hi3620-clk.dtsi | 1058 +++++++++++++++++++++++++++++++++++++
>> arch/arm/boot/dts/hi3620.dtsi | 513 ++++++++++++++++++
>> arch/arm/boot/dts/hi4511.dts | 648 +++++++++++++++++++++++
>> 4 files changed, 2220 insertions(+)
>> create mode 100644 arch/arm/boot/dts/hi3620-clk.dtsi
>> create mode 100644 arch/arm/boot/dts/hi3620.dtsi
>> create mode 100644 arch/arm/boot/dts/hi4511.dts
>>
>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>> index 641b3c9..6e7c1ca 100644
>> --- a/arch/arm/boot/dts/Makefile
>> +++ b/arch/arm/boot/dts/Makefile
>> @@ -61,6 +61,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
>> exynos5250-snow.dtb \
>> exynos5420-smdk5420.dtb \
>> exynos5440-ssdk5440.dtb
>> +dtb-$(CONFIG_ARCH_HI3xxx) += hi4511.dtb
>> dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
>> ecx-2000.dtb
>> dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
>> diff --git a/arch/arm/boot/dts/hi3620-clk.dtsi b/arch/arm/boot/dts/hi3620-clk.dtsi
>> new file mode 100644
>> index 0000000..78307c6
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/hi3620-clk.dtsi
>> @@ -0,0 +1,1058 @@
>> +/*
>> + * Hisilicon Ltd. Hi3620 SoC
>> + *
>> + * Copyright (C) 2012-2013 Hisilicon Ltd.
>> + * Copyright (C) 2012-2013 Linaro Ltd.
>> + *
>> + * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License version 2 as
>> + * publishhed by the Free Software Foundation.
>> + */
>> +
>> +/ {
>> + clocks {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + osc32k: osc32k {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + clock-frequency = <32768>;
>> + clock-output-names = "osc32khz";
>> + };
>
> So you've now moved these all under the clocks node, but this still
> isn't addressing Stephen's comments about using the
> node-name at unit-address and the reg property in each node.
>
> [...]
>
>> + sysctrl: system-controller at fc802000 {
>> + compatible = "hisilicon,sysctrl";
>> + reg = <0xfc802000 0x1000>;
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>
> Why is sysctrl and all of its children now under the clocks node?
>
>
> Kevin
SMP registers and clock registers are sharing the system controller.
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v9 3/7] ARM: dts: enable hi4511 with device tree
2013-08-30 1:19 ` Haojian Zhuang
@ 2013-08-30 14:44 ` Kevin Hilman
2013-09-02 8:33 ` Linus Walleij
0 siblings, 1 reply; 13+ messages in thread
From: Kevin Hilman @ 2013-08-30 14:44 UTC (permalink / raw)
To: linux-arm-kernel
Haojian Zhuang <haojian.zhuang@linaro.org> writes:
> On 30 August 2013 02:13, Kevin Hilman <khilman@linaro.org> wrote:
>> Haojian Zhuang <haojian.zhuang@linaro.org> writes:
>>
>>> Enable Hisilicon Hi4511 development platform with device tree support.
>>>
>>> Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
>>
>> This still doesn't look quite right...
>>
>>> ---
>>> arch/arm/boot/dts/Makefile | 1 +
>>> arch/arm/boot/dts/hi3620-clk.dtsi | 1058 +++++++++++++++++++++++++++++++++++++
>>> arch/arm/boot/dts/hi3620.dtsi | 513 ++++++++++++++++++
>>> arch/arm/boot/dts/hi4511.dts | 648 +++++++++++++++++++++++
>>> 4 files changed, 2220 insertions(+)
>>> create mode 100644 arch/arm/boot/dts/hi3620-clk.dtsi
>>> create mode 100644 arch/arm/boot/dts/hi3620.dtsi
>>> create mode 100644 arch/arm/boot/dts/hi4511.dts
>>>
>>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
>>> index 641b3c9..6e7c1ca 100644
>>> --- a/arch/arm/boot/dts/Makefile
>>> +++ b/arch/arm/boot/dts/Makefile
>>> @@ -61,6 +61,7 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
>>> exynos5250-snow.dtb \
>>> exynos5420-smdk5420.dtb \
>>> exynos5440-ssdk5440.dtb
>>> +dtb-$(CONFIG_ARCH_HI3xxx) += hi4511.dtb
>>> dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb \
>>> ecx-2000.dtb
>>> dtb-$(CONFIG_ARCH_INTEGRATOR) += integratorap.dtb \
>>> diff --git a/arch/arm/boot/dts/hi3620-clk.dtsi b/arch/arm/boot/dts/hi3620-clk.dtsi
>>> new file mode 100644
>>> index 0000000..78307c6
>>> --- /dev/null
>>> +++ b/arch/arm/boot/dts/hi3620-clk.dtsi
>>> @@ -0,0 +1,1058 @@
>>> +/*
>>> + * Hisilicon Ltd. Hi3620 SoC
>>> + *
>>> + * Copyright (C) 2012-2013 Hisilicon Ltd.
>>> + * Copyright (C) 2012-2013 Linaro Ltd.
>>> + *
>>> + * Author: Haojian Zhuang <haojian.zhuang@linaro.org>
>>> + *
>>> + * This program is free software; you can redistribute it and/or modify
>>> + * it under the terms of the GNU General Public License version 2 as
>>> + * publishhed by the Free Software Foundation.
>>> + */
>>> +
>>> +/ {
>>> + clocks {
>>> + #address-cells = <1>;
>>> + #size-cells = <1>;
>>> + ranges;
>>> +
>>> + osc32k: osc32k {
>>> + compatible = "fixed-clock";
>>> + #clock-cells = <0>;
>>> + clock-frequency = <32768>;
>>> + clock-output-names = "osc32khz";
>>> + };
>>
>> So you've now moved these all under the clocks node, but this still
>> isn't addressing Stephen's comments about using the
>> node-name at unit-address and the reg property in each node.
>>
>> [...]
>>
>>> + sysctrl: system-controller at fc802000 {
>>> + compatible = "hisilicon,sysctrl";
>>> + reg = <0xfc802000 0x1000>;
>>> + #address-cells = <1>;
>>> + #size-cells = <0>;
>>
>> Why is sysctrl and all of its children now under the clocks node?
>>
>>
>> Kevin
>
> SMP registers and clock registers are sharing the system controller.
That suggest the clock node should be a child of the sysctrl node, not
the other way around.
Kevin
^ permalink raw reply [flat|nested] 13+ messages in thread
* [PATCH v9 3/7] ARM: dts: enable hi4511 with device tree
2013-08-30 14:44 ` Kevin Hilman
@ 2013-09-02 8:33 ` Linus Walleij
0 siblings, 0 replies; 13+ messages in thread
From: Linus Walleij @ 2013-09-02 8:33 UTC (permalink / raw)
To: linux-arm-kernel
On Fri, Aug 30, 2013 at 4:44 PM, Kevin Hilman <khilman@linaro.org> wrote:
>>> Why is sysctrl and all of its children now under the clocks node?
>>>
>>> Kevin
>>
>> SMP registers and clock registers are sharing the system controller.
>
> That suggest the clock node should be a child of the sysctrl node, not
> the other way around.
That is the way we do it for the Nomadik in
arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
so a precedent exist. (SRC is system reset and control).
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2013-09-02 8:33 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2013-08-28 13:10 [PATCH v9 0/7] enable hi3xxx SoC Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 1/7] clk: hi3xxx: add clock support Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 2/7] ARM: hi3xxx: add board support with device tree Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 3/7] ARM: dts: enable hi4511 " Haojian Zhuang
2013-08-29 18:13 ` Kevin Hilman
2013-08-30 1:19 ` Haojian Zhuang
2013-08-30 14:44 ` Kevin Hilman
2013-09-02 8:33 ` Linus Walleij
2013-08-28 13:10 ` [PATCH v9 4/7] ARM: config: enable hi3xxx in multi_v7_defconfig Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 5/7] ARM: config: add defconfig for Hi3xxx Haojian Zhuang
2013-08-28 13:10 ` [PATCH v9 6/7] ARM: hi3xxx: add smp support Haojian Zhuang
2013-08-29 18:24 ` Kevin Hilman
2013-08-28 13:10 ` [PATCH v9 7/7] ARM: hi3xxx: add hotplug support Haojian Zhuang
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).