Re: [PATCH] ARM: dts: marvell: add missing SDHCI clock-names

[Gregory CLEMENT <gregory.clement@bootlin.com>]

Rosen Penev <rosenp@gmail.com> writes:

> The marvell,armada-380-sdhci binding requires "clock-names", and
> the sdhci-pxav3 driver requests its io clock by name before falling
> back to an unnamed lookup. Both Armada 38x and 39x nodes only carry
> an unnamed clocks reference, so dtbs_check reports "'clock-names'
> is a required property" on every board.
>
> Add clock-names = "io" to both nodes. No functional change: the
> driver already obtains the clock through its fallback.
>
> Assisted-by: opencode:big-pickle
> Signed-off-by: Rosen Penev <rosenp@gmail.com>

Applied on mvebu/dt

Thanks,

Gregory
> ---
>  arch/arm/boot/dts/marvell/armada-38x.dtsi | 1 +
>  arch/arm/boot/dts/marvell/armada-39x.dtsi | 1 +
>  2 files changed, 2 insertions(+)
>
> diff --git a/arch/arm/boot/dts/marvell/armada-38x.dtsi b/arch/arm/boot/dts/marvell/armada-38x.dtsi
> index 1155bee20523..598022645dd2 100644
> --- a/arch/arm/boot/dts/marvell/armada-38x.dtsi
> +++ b/arch/arm/boot/dts/marvell/armada-38x.dtsi
> @@ -627,6 +627,7 @@ sdhci: mmc@d8000 {
>  					<0x18454 0x4>;
>  				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&gateclk 17>;
> +				clock-names = "io";
>  				mrvl,clk-delay-cycles = <0x1F>;
>  				status = "disabled";
>  			};
> diff --git a/arch/arm/boot/dts/marvell/armada-39x.dtsi b/arch/arm/boot/dts/marvell/armada-39x.dtsi
> index 218fcf99ae07..81dd4ca5fbc9 100644
> --- a/arch/arm/boot/dts/marvell/armada-39x.dtsi
> +++ b/arch/arm/boot/dts/marvell/armada-39x.dtsi
> @@ -381,6 +381,7 @@ mmc@d8000 {
>  					<0x18454 0x4>;
>  				interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
>  				clocks = <&gateclk 17>;
> +				clock-names = "io";
>  				mrvl,clk-delay-cycles = <0x1F>;
>  				status = "disabled";
>  			};
> -- 
> 2.55.0
>

-- 
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com