[PATCH] ARM: dts: orion5x: fix number of sata port for linkstation ls-gl

[gregory.clement@free-electrons.com (Gregory CLEMENT)]

Hi Roger,
 
 On lun., d?c. 05 2016, Roger Shimizu <rogershimizu@gmail.com> wrote:

> [CC Arnd Bergmann]
>
> On Fri, Dec 2, 2016 at 12:11 AM, Roger Shimizu <rogershimizu@gmail.com> wrote:
>> Bug report from Debian [0] shows there's minor changed model of
>> Linkstation LS-GL that uses the 2nd SATA port of the SoC.
>> So it's necessary to enable two SATA ports, though for that specific
>> model only the 2nd one is used.
>>
>> [0] https://bugs.debian.org/845611
>>
>> Fixes: b1742ffa9ddb ("ARM: dts: orion5x: add device tree for buffalo linkstation ls-gl")
>> Reported-by: Ryan Tandy <ryan@nardis.ca>
>> Tested-by: Ryan Tandy <ryan@nardis.ca>
>> Signed-off-by: Roger Shimizu <rogershimizu@gmail.com>
>> ---
>>  arch/arm/boot/dts/orion5x-linkstation-lsgl.dts | 4 ++++
>>  1 file changed, 4 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
>> index 1cf644b..51dc734 100644
>> --- a/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
>> +++ b/arch/arm/boot/dts/orion5x-linkstation-lsgl.dts
>> @@ -82,6 +82,10 @@
>>         gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
>>  };
>>
>> +&sata {
>> +       nr-ports = <2>;
>> +};
>> +
>>  &ehci1 {
>>         status = "okay";
>>  };
>> --
>> 2.10.2
>>
>
> Is there any chance to get this simple fix into v4.9 or next v4.10?
> Thank you!

I can apply it on mvebu/fixes and make a pull request. But I don't know
if Arnd or Olof will get it.

Let's see ahow it goes.

Gregory

> -- 
> Roger Shimizu, GMT +9 Tokyo
> PGP/GPG: 4096R/6C6ACD6417B3ACB1

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com