[PATCH v2 net 0/6] Marvell Armada XP/370/38X Neta fixes

[PATCH v2 net 0/6] Marvell Armada XP/370/38X Neta fixes

[Marcin Wojtas]

Hi,

I updated the mvneta fixes patchset with minor corrections suggested by
Thomas Petazzoni.

I will be greatful for a feedback.

Best regards,
Marcin Wojtas

Changes from v2:
* Style fixes in patch updating mbus protection
* Remove redundant stable notifications except for patch 4/6

Changes from v1:
* update MBUS windows access protection register once, after whole loop
* add fixing value of MVNETA_RXQ_INTR_ENABLE_ALL_MASK
* add fixing error path for skb_build()
* add possibility of setting custom TX IP checksum limit in DT property

Marcin Wojtas (6):
  net: mvneta: add configuration for MBUS windows access protection
  net: mvneta: fix bit assignment in MVNETA_RXQ_CONFIG_REG
  net: mvneta: fix bit assignment for RX packet irq enable
  net: mvneta: fix error path for building skb
  net: mvneta: enable setting custom TX IP checksum limit
  net: mvneta: enable IP checksum with jumbo frames for Armada 38x on
    Port0

 .../bindings/net/marvell-armada-370-neta.txt       |  6 ++++
 arch/arm/boot/dts/armada-38x.dtsi                  |  1 +
 drivers/net/ethernet/marvell/mvneta.c              | 33 ++++++++++++++++++----
 3 files changed, 34 insertions(+), 6 deletions(-)

-- 
1.8.3.1

[PATCH v3 net 1/6] net: mvneta: add configuration for MBUS windows access protection

[Marcin Wojtas]

This commit adds missing configuration of MBUS windows access protection
in mvneta_conf_mbus_windows function - a dedicated variable for that
purpose remained there unused since v3.8 initial mvneta support. Because
of that the register contents were inherited from the bootloader.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network
unit")
---
 drivers/net/ethernet/marvell/mvneta.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index e84c7f2..2d80256 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -62,6 +62,7 @@
 #define MVNETA_WIN_SIZE(w)                      (0x2204 + ((w) << 3))
 #define MVNETA_WIN_REMAP(w)                     (0x2280 + ((w) << 2))
 #define MVNETA_BASE_ADDR_ENABLE                 0x2290
+#define MVNETA_ACCESS_PROTECT_ENABLE            0x2294
 #define MVNETA_PORT_CONFIG                      0x2400
 #define      MVNETA_UNI_PROMISC_MODE            BIT(0)
 #define      MVNETA_DEF_RXQ(q)                  ((q) << 1)
@@ -3191,6 +3192,7 @@ static void mvneta_conf_mbus_windows(struct mvneta_port *pp,
 	}
 
 	mvreg_write(pp, MVNETA_BASE_ADDR_ENABLE, win_enable);
+	mvreg_write(pp, MVNETA_ACCESS_PROTECT_ENABLE, win_protect);
 }
 
 /* Power up the port */
-- 
1.8.3.1

[PATCH v3 net 2/6] net: mvneta: fix bit assignment in MVNETA_RXQ_CONFIG_REG

[Marcin Wojtas]

MVNETA_RXQ_HW_BUF_ALLOC bit which controls enabling hardware buffer
allocation was mistakenly set as BIT(1). This commit fixes the assignment.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Reviewed-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network
unit")
---
 drivers/net/ethernet/marvell/mvneta.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 2d80256..64c46f0 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -36,7 +36,7 @@
 
 /* Registers */
 #define MVNETA_RXQ_CONFIG_REG(q)                (0x1400 + ((q) << 2))
-#define      MVNETA_RXQ_HW_BUF_ALLOC            BIT(1)
+#define      MVNETA_RXQ_HW_BUF_ALLOC            BIT(0)
 #define      MVNETA_RXQ_PKT_OFFSET_ALL_MASK     (0xf    << 8)
 #define      MVNETA_RXQ_PKT_OFFSET_MASK(offs)   ((offs) << 8)
 #define MVNETA_RXQ_THRESHOLD_REG(q)             (0x14c0 + ((q) << 2))
-- 
1.8.3.1

[PATCH v3 net 3/6] net: mvneta: fix bit assignment for RX packet irq enable

[Marcin Wojtas]

A value originally defined in the driver was inappropriate. Even though
the ingress was somehow working, writing MVNETA_RXQ_INTR_ENABLE_ALL_MASK
to MVNETA_INTR_ENABLE didn't make any effect, because the bits [31:16]
are reserved and read-only.

This commit updates MVNETA_RXQ_INTR_ENABLE_ALL_MASK to be compliant with
the controller's documentation.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>

Fixes: c5aff18204da ("net: mvneta: driver for Marvell Armada 370/XP network
unit")
---
 drivers/net/ethernet/marvell/mvneta.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 64c46f0..5dffb68 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -160,7 +160,7 @@
 
 #define MVNETA_INTR_ENABLE                       0x25b8
 #define      MVNETA_TXQ_INTR_ENABLE_ALL_MASK     0x0000ff00
-#define      MVNETA_RXQ_INTR_ENABLE_ALL_MASK     0xff000000  // note: neta says it's 0x000000FF
+#define      MVNETA_RXQ_INTR_ENABLE_ALL_MASK     0x000000ff
 
 #define MVNETA_RXQ_CMD                           0x2680
 #define      MVNETA_RXQ_DISABLE_SHIFT            8
-- 
1.8.3.1

[PATCH v3 net 4/6] net: mvneta: fix error path for building skb

[Marcin Wojtas]

In the actual RX processing, there is same error path for both descriptor
ring refilling and building skb fails. This is not correct, because after
successful refill, the ring is already updated with newly allocated
buffer. Then, in case of build_skb() fail, hitherto code left the original
buffer unmapped.

This patch fixes above situation by swapping error check of skb build with
DMA-unmap of original buffer.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Acked-by: Simon Guinot <simon.guinot@sequanux.org>
Cc: <stable@vger.kernel.org> # v4.2+
Fixes a84e32894191 ("net: mvneta: fix refilling for Rx DMA buffers")
---
 drivers/net/ethernet/marvell/mvneta.c | 8 ++++++--
 1 file changed, 6 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 5dffb68..5a98c5d 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -1580,12 +1580,16 @@ static int mvneta_rx(struct mvneta_port *pp, int rx_todo,
 		}
 
 		skb = build_skb(data, pp->frag_size > PAGE_SIZE ? 0 : pp->frag_size);
-		if (!skb)
-			goto err_drop_frame;
 
+		/* After refill old buffer has to be unmapped regardless
+		 * the skb is successfully built or not.
+		 */
 		dma_unmap_single(dev->dev.parent, phys_addr,
 				 MVNETA_RX_BUF_SIZE(pp->pkt_size), DMA_FROM_DEVICE);
 
+		if (!skb)
+			goto err_drop_frame;
+
 		rcvd_pkts++;
 		rcvd_bytes += rx_bytes;
 
-- 
1.8.3.1

[PATCH v3 net 5/6] net: mvneta: enable setting custom TX IP checksum limit

[Marcin Wojtas]

Since Armada 38x SoC can support IP checksum for jumbo frames only on
a single port, it means that this feature should be enabled per-port,
rather than for the whole SoC.

This patch enables setting custom TX IP checksum limit by adding new
optional property to the mvneta device tree node. If not used, by
default 1600B is set for "marvell,armada-370-neta" and 9800B for other
strings, which ensures backward compatibility. Binding documentation
is updated accordingly.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
 .../bindings/net/marvell-armada-370-neta.txt          |  6 ++++++
 drivers/net/ethernet/marvell/mvneta.c                 | 19 +++++++++++++++++--
 2 files changed, 23 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
index f5a8ca2..aeea50c 100644
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
@@ -8,6 +8,11 @@ Required properties:
 - phy-mode: See ethernet.txt file in the same directory
 - clocks: a pointer to the reference clock for this device.
 
+Optional properties:
+- tx-csum-limit: maximum mtu supported by port that allow TX checksum.
+  Value is presented in bytes. If not used, by default 1600B is set for
+  "marvell,armada-370-neta" and 9800B for others.
+
 Example:
 
 ethernet at d0070000 {
@@ -15,6 +20,7 @@ ethernet at d0070000 {
 	reg = <0xd0070000 0x2500>;
 	interrupts = <8>;
 	clocks = <&gate_clk 4>;
+	tx-csum-limit = <9800>
 	status = "okay";
 	phy = <&phy0>;
 	phy-mode = "rgmii-id";
diff --git a/drivers/net/ethernet/marvell/mvneta.c b/drivers/net/ethernet/marvell/mvneta.c
index 5a98c5d..ed622fa 100644
--- a/drivers/net/ethernet/marvell/mvneta.c
+++ b/drivers/net/ethernet/marvell/mvneta.c
@@ -243,6 +243,7 @@
 #define MVNETA_VLAN_TAG_LEN             4
 
 #define MVNETA_CPU_D_CACHE_LINE_SIZE    32
+#define MVNETA_TX_CSUM_DEF_SIZE		1600
 #define MVNETA_TX_CSUM_MAX_SIZE		9800
 #define MVNETA_ACC_MODE_EXT		1
 
@@ -3256,6 +3257,7 @@ static int mvneta_probe(struct platform_device *pdev)
 	char hw_mac_addr[ETH_ALEN];
 	const char *mac_from;
 	const char *managed;
+	int tx_csum_limit;
 	int phy_mode;
 	int err;
 	int cpu;
@@ -3356,8 +3358,21 @@ static int mvneta_probe(struct platform_device *pdev)
 		}
 	}
 
-	if (of_device_is_compatible(dn, "marvell,armada-370-neta"))
-		pp->tx_csum_limit = 1600;
+	if (!of_property_read_u32(dn, "tx-csum-limit", &tx_csum_limit)) {
+		if (tx_csum_limit < 0 ||
+		    tx_csum_limit > MVNETA_TX_CSUM_MAX_SIZE) {
+			tx_csum_limit = MVNETA_TX_CSUM_DEF_SIZE;
+			dev_info(&pdev->dev,
+				 "Wrong TX csum limit in DT, set to %dB\n",
+				 MVNETA_TX_CSUM_DEF_SIZE);
+		}
+	} else if (of_device_is_compatible(dn, "marvell,armada-370-neta")) {
+		tx_csum_limit = MVNETA_TX_CSUM_DEF_SIZE;
+	} else {
+		tx_csum_limit = MVNETA_TX_CSUM_MAX_SIZE;
+	}
+
+	pp->tx_csum_limit = tx_csum_limit;
 
 	pp->tx_ring_size = MVNETA_MAX_TXD;
 	pp->rx_ring_size = MVNETA_MAX_RXD;
-- 
1.8.3.1

[PATCH v3 net 6/6] net: mvneta: enable IP checksum with jumbo frames for Armada 38x on Port0

[Marcin Wojtas]

The Ethernet controller found in the Armada 38x SoC's family support
TCP/IP checksumming with frame sizes larger than 1600 bytes, however
only on port 0.

This commit enables it by setting 'tx-csum-limit' to 9800B in
'ethernet at 70000' node.

Signed-off-by: Marcin Wojtas <mw@semihalf.com>
---
 arch/arm/boot/dts/armada-38x.dtsi | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
index c6a0e9d..e8b7f67 100644
--- a/arch/arm/boot/dts/armada-38x.dtsi
+++ b/arch/arm/boot/dts/armada-38x.dtsi
@@ -498,6 +498,7 @@
 				reg = <0x70000 0x4000>;
 				interrupts-extended = <&mpic 8>;
 				clocks = <&gateclk 4>;
+				tx-csum-limit = <9800>;
 				status = "disabled";
 			};
 
-- 
1.8.3.1

[PATCH v3 net 6/6] net: mvneta: enable IP checksum with jumbo frames for Armada 38x on Port0

[Gregory CLEMENT]

Hi Marcin,
 
 On ven., nov. 27 2015, Marcin Wojtas <mw@semihalf.com> wrote:

> The Ethernet controller found in the Armada 38x SoC's family support
> TCP/IP checksumming with frame sizes larger than 1600 bytes, however
> only on port 0.
>
> This commit enables it by setting 'tx-csum-limit' to 9800B in
> 'ethernet at 70000' node.
>
> Signed-off-by: Marcin Wojtas <mw@semihalf.com>
> ---
>  arch/arm/boot/dts/armada-38x.dtsi | 1 +

This commit should not be merged through the network subsystem but
through mvebu and then arm-soc.

Indeed we tried to centralize all the dts change in only one subsystem
to reduce the merge conflict.

Could you rename it in "mvebu: dts: enable IP checksum with jumbo frames
for Armada 38x on Port0" ?

I will applied on in mvebu/dts as soon as the network part will be
applied.

Thanks,

Gregory


>  1 file changed, 1 insertion(+)
>
> diff --git a/arch/arm/boot/dts/armada-38x.dtsi b/arch/arm/boot/dts/armada-38x.dtsi
> index c6a0e9d..e8b7f67 100644
> --- a/arch/arm/boot/dts/armada-38x.dtsi
> +++ b/arch/arm/boot/dts/armada-38x.dtsi
> @@ -498,6 +498,7 @@
>  				reg = <0x70000 0x4000>;
>  				interrupts-extended = <&mpic 8>;
>  				clocks = <&gateclk 4>;
> +				tx-csum-limit = <9800>;
>  				status = "disabled";
>  			};
>  
> -- 
> 1.8.3.1
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com