From: khilman@deeprootsystems.com (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle
Date: Fri, 16 Nov 2012 10:53:55 -0800 [thread overview]
Message-ID: <87y5i1crb0.fsf@deeprootsystems.com> (raw)
In-Reply-To: <1353067706-29491-2-git-send-email-anilkumar@ti.com> (AnilKumar Ch's message of "Fri, 16 Nov 2012 17:38:23 +0530")
AnilKumar Ch <anilkumar@ti.com> writes:
> From: Colin Foe-Parker <colin.foeparker@logicpd.com>
>
> Set tps65217 PMIC status to OFF if power enable toggle is
> supported. Also adds platform data flag, which should be
> passed from board init data.
nit: changelog mentions platform_data, but the code is using DT.
Kevin
> Signed-off-by: Colin Foe-Parker <colin.foeparker@logicpd.com>
> [anilkumar at ti.com: move the additions to tps65217 MFD driver]
> Signed-off-by: AnilKumar Ch <anilkumar@ti.com>
> ---
> .../devicetree/bindings/regulator/tps65217.txt | 4 ++++
> drivers/mfd/tps65217.c | 12 ++++++++++++
> 2 files changed, 16 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt
> index d316fb8..4f05d20 100644
> --- a/Documentation/devicetree/bindings/regulator/tps65217.txt
> +++ b/Documentation/devicetree/bindings/regulator/tps65217.txt
> @@ -11,6 +11,9 @@ Required properties:
> using the standard binding for regulators found at
> Documentation/devicetree/bindings/regulator/regulator.txt.
>
> +Optional properties:
> +- ti,pmic-shutdown-controller: Telling the PMIC to shutdown on PWR_EN toggle.
> +
> The valid names for regulators are:
> tps65217: dcdc1, dcdc2, dcdc3, ldo1, ldo2, ldo3 and ldo4
>
> @@ -20,6 +23,7 @@ Example:
>
> tps: tps at 24 {
> compatible = "ti,tps65217";
> + ti,pmic-shutdown-controller;
>
> regulators {
> dcdc1_reg: dcdc1 {
> diff --git a/drivers/mfd/tps65217.c b/drivers/mfd/tps65217.c
> index 3fb32e6..c7f17d8 100644
> --- a/drivers/mfd/tps65217.c
> +++ b/drivers/mfd/tps65217.c
> @@ -160,6 +160,7 @@ static int __devinit tps65217_probe(struct i2c_client *client,
> unsigned int version;
> unsigned int chip_id = ids->driver_data;
> const struct of_device_id *match;
> + bool status_off = false;
> int ret;
>
> if (client->dev.of_node) {
> @@ -170,6 +171,8 @@ static int __devinit tps65217_probe(struct i2c_client *client,
> return -EINVAL;
> }
> chip_id = (unsigned int)match->data;
> + status_off = of_property_read_bool(client->dev.of_node,
> + "ti,pmic-shutdown-controller");
> }
>
> if (!chip_id) {
> @@ -207,6 +210,15 @@ static int __devinit tps65217_probe(struct i2c_client *client,
> return ret;
> }
>
> + /* Set the PMIC to shutdown on PWR_EN toggle */
> + if (status_off) {
> + ret = tps65217_set_bits(tps, TPS65217_REG_STATUS,
> + TPS65217_STATUS_OFF, TPS65217_STATUS_OFF,
> + TPS65217_PROTECT_NONE);
> + if (ret)
> + dev_warn(tps->dev, "unable to set the status OFF\n");
> + }
> +
> dev_info(tps->dev, "TPS65217 ID %#x version 1.%d\n",
> (version & TPS65217_CHIPID_CHIP_MASK) >> 4,
> version & TPS65217_CHIPID_REV_MASK);
next prev parent reply other threads:[~2012-11-16 18:53 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-11-16 12:08 [PATCH v2 0/4] pm: Add power off control AnilKumar Ch
2012-11-16 12:08 ` [PATCH v2 1/4] mfd: tps65217: Set PMIC to shutdowm on PWR_EN toggle AnilKumar Ch
2012-11-16 18:53 ` Kevin Hilman [this message]
2012-11-19 10:50 ` Peter Korsgaard
2012-11-19 11:36 ` AnilKumar, Chimata
2012-11-19 12:17 ` Peter Korsgaard
2012-11-16 12:08 ` [PATCH v2 2/4] rtc: OMAP: Add system pm_power_off to rtc driver AnilKumar Ch
2012-11-16 12:08 ` [PATCH v2 3/4] ARM: dts: AM33XX: Set pmic-shutdown-controller for BeagleBone AnilKumar Ch
2012-11-16 12:08 ` [PATCH v2 4/4] ARM: dts: AM33XX: Enable system power off control in am335x-bone AnilKumar Ch
2012-11-16 19:10 ` Kevin Hilman
2012-11-19 4:14 ` AnilKumar, Chimata
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=87y5i1crb0.fsf@deeprootsystems.com \
--to=khilman@deeprootsystems.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).