From mboxrd@z Thu Jan 1 00:00:00 1970 From: khilman@ti.com (Kevin Hilman) Date: Tue, 29 Nov 2011 07:15:00 -0800 Subject: [PATCH v8 00/24] gpio/omap: driver cleanup and fixes In-Reply-To: (Tarun Kanti DebBarma's message of "Fri, 25 Nov 2011 16:00:27 +0530") References: <1317803593-12259-1-git-send-email-tarun.kanti@ti.com> <87obwsg9ua.fsf@ti.com> Message-ID: <87y5uz6juz.fsf@ti.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org "DebBarma, Tarun Kanti" writes: > On Fri, Nov 4, 2011 at 2:57 PM, DebBarma, Tarun Kanti > wrote: >> On Fri, Nov 4, 2011 at 3:14 AM, Kevin Hilman wrote: >>> Tarun Kanti DebBarma writes: >>> >>>> This series is continuation of cleanup of OMAP GPIO driver and fixes. >>> >>> Using this series on 3630/Zoom3, UART wakeups no longer work from >>> suspend. ?That suggests that GPIO wakeups from retention/off are not >>> working. >>> >>> Please test GPIO wakeups from retention/off. ?One way is to use Zoom3 >>> UART wakeup from suspend using by enabling UART wakeups and suspending: >>> >>> ? # echo enabled > /sys/devices/platform/serial8250.0/tty/ttyS0/power/wakeup >>> ? # echo mem > /sys/power/state >> Ok, I will test and make necessary fix. > I have done retention test of the latest series on Zoom3. When I try > running off mode > test it says support is not present because of an errata. Specifically, CORE off is not supported on that rev of 36xx due to an errata. Can you try on a newer 36xx? > Here is the overall log: The rest of the dump seems to point to an MMC driver problem. Please take this with the MMC driver folks. Kevin