[PATCH 1/2] ARM: at91/dt: sam9x5: add pinctrl for pwm0

[g.portay@overkiz.com (g.portay at overkiz.com)]

On 2015-04-07 21:22, Alexandre Belloni wrote:
> Hi Ga?l,
> 
> On 07/04/2015 at 16:11:23 +0200, Ga?l PORTAY wrote :
>> Defines the pinctrl configurations for PWM0.
>> 
>> Signed-off-by: Ga?l PORTAY <g.portay@overkiz.com>
>> ---
>>  arch/arm/boot/dts/at91sam9x5.dtsi | 46 
>> +++++++++++++++++++++++++++++++++++++++
>>  1 file changed, 46 insertions(+)
>> 
>> diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi 
>> b/arch/arm/boot/dts/at91sam9x5.dtsi
>> index d221179..08ed53d 100644
>> --- a/arch/arm/boot/dts/at91sam9x5.dtsi
>> +++ b/arch/arm/boot/dts/at91sam9x5.dtsi
>> @@ -463,6 +463,52 @@
>>  					};
>>  				};
>> 
>> +				pwm0 {
>> +					pinctrl_pwm0_pwm0_0: pwm0_pwm0-0 {
>> +						atmel,pins =
>> +							<AT91_PIOB 11 AT91_PERIPH_B AT91_PINCTRL_NONE>;	/* PB11 periph 
>> B */
>                                            please drop those useless
> comments --^
> 
> Else, I'm fine with that patch.

I do think so... I added them for consistency only... I will drop them 
in v2.

Do you want I drop all those kind of comments (of the whole file) as 
well ?

Thanks for your review.