From mboxrd@z Thu Jan 1 00:00:00 1970 From: laurent.pinchart@ideasonboard.com (Laurent Pinchart) Date: Mon, 03 Mar 2014 12:00:02 +0100 Subject: [PATCH 4/4] ARM: shmobile: r7s72100: use workaround for non DT-clocks In-Reply-To: <20140303092200.GB6531@katana> References: <1393621768-12568-1-git-send-email-wsa@the-dreams.de> <1712106.fu6iC2mT2W@avalon> <20140303092200.GB6531@katana> Message-ID: <8879891.pRJJJrkMnR@avalon> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Monday 03 March 2014 10:22:00 Wolfram Sang wrote: > On Sun, Mar 02, 2014 at 11:21:40PM +0100, Laurent Pinchart wrote: > > Hi Wolfram, > > > > Thank you for the patch. > > > > On Friday 28 February 2014 22:09:28 Wolfram Sang wrote: > > > From: Wolfram Sang > > > > > > SCIF2 and MTU2 are not yet prepared for DT usage, so use the common > > > workaround via clkdev for now. > > > > What about adding a DT node for the serial port instead ? :-) > > Yes, done in V2 already. Yet, I'd like to keep SCIF in here because it > is the least intrusive way to get the system to boot. When the SCIF > nodes are added later incrementally, I remove the sh-sci.2 workaround, > but the whole mechanism is still needed for MTU2 anyhow. True. I'm working on MTU2 DT support, but that will take a bit more time. -- Regards, Laurent Pinchart -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 490 bytes Desc: This is a digitally signed message part. URL: