From mboxrd@z Thu Jan 1 00:00:00 1970 From: elfring@users.sourceforge.net (SF Markus Elfring) Date: Sat, 15 Oct 2016 22:53:27 +0200 Subject: [PATCH 2/3] ARM-OMAP2+: mux: Use seq_putc() in omap_mux_dbg_signal_show() In-Reply-To: References: Message-ID: <88deac82-1339-330c-3561-abd30dbaf6b1@users.sourceforge.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Markus Elfring Date: Sat, 15 Oct 2016 22:24:29 +0200 A single character (line break) should be put into a sequence. Thus use the corresponding function "seq_putc". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring --- arch/arm/mach-omap2/mux.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 4bdfa3d..e1fa39e 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -661,7 +661,7 @@ static int omap_mux_dbg_signal_show(struct seq_file *s, void *unused) m->balls[1] ? m->balls[1] : none); seq_puts(s, "mode: "); omap_mux_decode(s, val); - seq_printf(s, "\n"); + seq_putc(s, '\n'); seq_printf(s, "signals: %s | %s | %s | %s | %s | %s | %s | %s\n", m->muxnames[0] ? m->muxnames[0] : none, m->muxnames[1] ? m->muxnames[1] : none, -- 2.10.1