Re: [PATCH v4 6/7] phy: exynos5-usbdrd: subscribe to orientation notifier if required

["André Draszik" <andre.draszik@linaro.org>]

Hi Krzysztof,

On Sat, 2025-02-15 at 11:07 +0100, Krzysztof Kozlowski wrote:
> On 14/02/2025 20:30, Marek Szyprowski wrote:
> > On 06.12.2024 17:31, André Draszik wrote:
> > > gs101's SS phy needs to be configured differently based on the
> > > connector orientation, as the SS link can only be established if the
> > > mux is configured correctly.
> > > 
> > > The code to handle programming of the mux is in place already, this commit
> > > now adds the missing pieces to subscribe to the Type-C orientation
> > > switch event.
> > > 
> > > Note that for this all to work we rely on the USB controller
> > > re-initialising us. It should invoke our .exit() upon cable unplug, and
> > > during cable plug we'll receive the orientation event after which we
> > > expect our .init() to be called.
> > > 
> > > Above reinitialisation happens if the DWC3 controller can enter runtime
> > > suspend automatically. For the DWC3 driver, this is an opt-in:
> > >      echo auto > /sys/devices/.../11110000.usb/power/control
> > > Once done, things work as long as the UDC is not bound as otherwise it
> > > stays busy because it doesn't cancel / stop outstanding TRBs. For now
> > > we have to manually unbind the UDC in that case:
> > >       echo "" > sys/kernel/config/usb_gadget/.../UDC
> > > 
> > > Note that if the orientation-switch property is missing from the DT,
> > > the code will behave as before this commit (meaning for gs101 it will
> > > work in SS mode in one orientation only). Other platforms are not
> > > affected either way.
> > > 
> > > Signed-off-by: André Draszik <andre.draszik@linaro.org>
> > > 
> > > ---
> > > v3:
> > > * drop init to -1 of phy_drd->orientation (Vinod)
> > > * avoid #ifdef and switch to normal conditional IS_ENABLED() for
> > >    CONFIG_TYPEC
> > > 
> > > v2:
> > > * move #include typec_mux.h from parent patch into this one (Peter)
> > > ---
> > >   drivers/phy/samsung/Kconfig              |  1 +
> > >   drivers/phy/samsung/phy-exynos5-usbdrd.c | 56 ++++++++++++++++++++++++++++++++
> > >   2 files changed, 57 insertions(+)
> > > 
> > > diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
> > > index f10afa3d7ff5..fc7bd1088576 100644
> > > --- a/drivers/phy/samsung/Kconfig
> > > +++ b/drivers/phy/samsung/Kconfig
> > > @@ -80,6 +80,7 @@ config PHY_EXYNOS5_USBDRD
> > >   	tristate "Exynos5 SoC series USB DRD PHY driver"
> > >   	depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
> > >   	depends on HAS_IOMEM
> > > +	depends on TYPEC || (TYPEC=n && COMPILE_TEST)
> 
> BTW, this syntax never made any sense - it did not work. The optional
> dependency is expressed as:
> 	depends on TYPEC || !TYPEC

The depends is required to get it to link. PHY_EXYNOS5_USBDRD
defaults to Y, while TYPEC defaults to M in the arm64 defconfig.
Using this expression, PHY_EXYNOS5_USBDRD changes to M.

Otherwise it won't link.


> but what it epxressed is that it is possible to build it without typec
> only for compile test, which is odd if this was meant to be optional.
> And further code:
> 	if (!IS_ENABLED(CONFIG_TYPEC))
> 
> clearly suggests this should be optional.

Yes, it's meant to be optional.

Cheers,
Andre'